MX-FNX9 (serv.man25). ROM UPGRADE ... (2) — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
MX-FNX9 (serv.man25)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
31.61 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / ROM UPGRADE ... (2)
File
mx-fnx9-sm25.pdf
Date

View Sharp MX-FNX9 (serv.man25) Technical Bulletin online

 
Date:  
29
th
 May 2009 
Model:  
MX-FNX9 
Ref.:  
003 
Colour:  
White 
Page:  
1 of 2 
 
 
 
 
 
 
 
TECHNICAL BULLETIN 
 
 
 
 
 
 
 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-672 
 
 
 
 
1. Model Name:           
MX-FNX9 (Optional part for MX-2600 series/ 3100 series/ 4100 series / 5000 series, MX-
M283N/ M363 series / M453 series / M503 series) 
 
2. Description: ROM 
upgrade 
* Check that the ROM version is “010202” or newer when installing the inner finisher (MX-
FNX9) to MX-M283N/M363 series/ M453 series / M503 series. 
If the version number of MX-FNX9 is older than “010202”, upgrade the version to “010202” or 
newer before using the inner finisher. 
If the ROM version is older, the problem described in page 2 tends to appear. 
 
From mid-April 2009 production 
ROM control No. 
Version No. 
A02 010202 
Item of change: See the accompanying sheet. 
* Part code of control board has been changed along with the ROM upgrade. However, modification 
can be made by upgrading the existing control board. Therefore, it is not necessary to replace 
the control board. 
 
Ref. 
No. 
Model 
name 
Version P/G No. 
Current parts 
New parts 
Price
rank
Q'ty Parts 
name 
Effective 
time 
Inter- 
change- 
ability 
Parts code 
Parts code 
1 MX-FNX9  ALL 10-13 0CW4141K241F/ 0CW4141K241H/ CH 1 CONTROL PWB 
2009/4 
Mid 
<Interchange> 
1. Interchangeable. 
4. Not interchangeable. 
2. Current type can be used in place of new type. 
New type cannot be used in place of current type. 
5. Interchangeable if replaced with same types of  
related parts in use. 
3. Current type cannot be used in place of new type. 
New type can be used in place of current type. 
6. Others. 
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with 
specified ones for maintaining the safety and performance of the set. 
 
ROM Version Combination History Table 
No. ROM 
administration 
Version No. 
Action 
Issued T/R No. 
(1) 
A01 010102 
2008/10 
Mid 
Bulletin Ref 001 (CCE-
604) 
ROM UPGRADE ..... (2).
 
 
 
 
 
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-672 
[Description] 
No. Items 
Detail 
Modification of problem 
Modification of problem 
Sometimes staple position is dislocated on rear side when 2-staple mode is set. 
Modification is made to fix this problem. 
Modification of problem 
When stapling small size of papers, sometimes papers in processing tray move toward 
paper exit gradually which led to bad alignment. Modification is made to fix this problem. 
Modification of problem 
Bad alignment occurred in staple mode around 35th papers depends on type of paper. 
Modification is made to fix this problem. 
 
Page of 2
Display

Download Sharp MX-FNX9 (serv.man25) Technical Bulletin

Here you can view online or download Sharp MX-FNX9 (serv.man25) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp MX-FNX9 (serv.man25) Copying Equipment. Information contained in Sharp MX-FNX9 (serv.man25) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).