Sharp LC-37AD1E (serv.man34) User Manual / Operation Manual ▷ View online
67
Using external equipment
AVC System (front view)
Game console/Camcorder
Composite video cable
(commercially available)
(commercially available)
S-video cable
(commercially available)
(commercially available)
Enjoying a game console and viewing camcorder images
Connecting a game console or camcorder
A game console, camcorder and some other audiovisual equipment are conveniently connected using the
INPUT 4 terminals.
INPUT 4 terminals.
NOTE
• The S-video terminal has priority over the video terminals.
Displaying an image of the game console or
camcorder
camcorder
To connect a game console or view a camcorder, select
“INPUT4” from the “INPUT SOURCE” menu using b
on the remote control unit or INPUT on the Display.
“INPUT4” from the “INPUT SOURCE” menu using b
on the remote control unit or INPUT on the Display.
The setting is stored and can be selected on the
“INPUT SOURCE” menu.
“INPUT SOURCE” menu.
NOTE
• Each time b is pressed, the input source toggles.
• Refer to your game console or camcorder operation
• Refer to your game console or camcorder operation
manual for the signal type.
• See page 73 for how to select the signal type.
INPUT SOURCE
TV
DTV
INPUT1
INPUT2
INPUT3
INPUT4
PC
MENU
[Option ... Input Select]
AUTO
S-Video
Video
(For INPUT4 signal)
LC-37AD1E(E)-g
03.11.28, 8:32 AM
67
68
Using external equipment
RGB cable
(commercially available)
(commercially available)
AVC System (front view)
ø 3.5 mm stereo minijack cable
(commercially available)
(commercially available)
PC
15
14
13
12
9
11
10
8
7
6
5
4
3
2
1
Pin No.
Signal name
Pin No.
Signal name
Pin No.
Signal name
1
R
6
GND (Ground)
q
Not connected
2
G
7
GND (Ground)
w
SDA
3
B
8
GND (Ground)
e
HD
4
Not connected
9
+5V
r
VD
5
CSYNC
0
GND (Ground)
t
SCL
Viewing an image from a PC
Connecting a PC
Use the PC terminals to connect a PC.
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 90 for a list of PC signals compatible with the System.
• Refer to page 90 for a list of PC signals compatible with the System.
Signal names for 15-pin mini D-sub connecter
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
Displaying an image from a PC
To view an image from a PC, select “PC” from the
“INPUT SOURCE” menu using b on the remote
control unit or INPUT on the Display.
“INPUT SOURCE” menu using b on the remote
control unit or INPUT on the Display.
When connecting to a PC, the correct input signal type
is automatically detected. (See page 78.) If the PC
image does not come in clearly, you may need to set
the Auto Sync. adjustment in the “Setup” menu. (See
page 72.)
is automatically detected. (See page 78.) If the PC
image does not come in clearly, you may need to set
the Auto Sync. adjustment in the “Setup” menu. (See
page 72.)
NOTE
• Each time b is pressed, the input source toggles.
INPUT SOURCE
TV
DTV
INPUT1
INPUT2
INPUT3
INPUT4
PC
LC-37AD1E(E)-g
03.11.28, 8:32 AM
68
69
Rear view
Using external equipment
Connecting external speakers
When using external speakers
• Change the speaker setting to external speakers. (See
page 70.)
Make sure to connect the speaker terminal and cable
polarity (L, +) properly
polarity (L, +) properly
• The speaker terminal has plus (L) and minus (+) polarity.
• Plus is red and minus is black.
• The cables are also divided into plus and minus.
• When connecting the left/right speakers, be sure to
• Plus is red and minus is black.
• The cables are also divided into plus and minus.
• When connecting the left/right speakers, be sure to
connect the plus/minus terminals with the correct cables.
NOTE
• Unplug the AC cord from the AC outlet before installing
the speakers.
How to connect the
speaker cable
Push down the tab.
Insert the end of the
cable.
cable.
1
1
1
1
1
2
2
2
2
2
3
3
3
3
3
Lift the tab back
up.
up.
CAUTION
• Make sure external speakers have 4 ohm and 10 watt
specifications.
• Connect the plus/minus terminals with the correct cables.
Incorrect connection may cause a short.
LC-37AD1E(E)-g
03.11.28, 8:32 AM
69
70
Selecting speakers
You can output audio using the supplied speakers
(detachable) or other external speakers.
(detachable) or other external speakers.
Press c/d to select “External” or
“Detachable”, and then press OK.
“Detachable”, and then press OK.
4
Press MENU and the MENU screen displays.
Press c/d to select “Audio”.
• Audio menu displays.
Press a/b to select “Speaker”, and then
press OK.
press OK.
1
2
3
MENU
[Audio ... Speaker]
Audio
Power control
USER
Treble
Bass
Balance
Dolby Virtual
Speaker
Reset
[0]
[0]
[0]
–15
–15
L
+15
+15
R
[Detachable]
[Off]
External
Detachable
Using external equipment
NOTE
• Audio menu items are greyed out when Audio output is
variable or when headphones are in use.
• Balance is greyed out when Dolby Virtual is set to “On”.
LC-37AD1E(E)-g
03.11.28, 8:32 AM
70
Click on the first or last page to see other LC-37AD1E (serv.man34) service manuals if exist.