Sharp LC-37AD1E (serv.man34) User Manual / Operation Manual ▷ View online
91
RS-232C port specifications
Return code
Command 4-digits
Parameter 4-digits
PC Control of the System
• When a program is set, the display can be controlled from the PC using the RS-232C terminal.
The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and
settings can be made, enabling automatic programmed playing.
settings can be made, enabling automatic programmed playing.
•
Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-sub RS-232C for the
connections.
NOTE
• This operation system should be used by a person who is accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the PC to match the display’s communications conditions. The
display's communications settings are as follows:
Set the RS-232C communications settings on the PC to match the display’s communications conditions. The
display's communications settings are as follows:
Baud rate:
Parity bit:
Data length:
Stop bit:
Flow control:
9,600 bps
8 bits
None
None
1 bit
None
Appendix
Command format
Communication procedure
Send the control commands from the PC via the RS-232C connector.
The Display operates according to the received command and sends a response message to the PC.
Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending
the next command.
Send the control commands from the PC via the RS-232C connector.
The Display operates according to the received command and sends a response message to the PC.
Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending
the next command.
Eight ASCII codes e CR
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 – 9, x, blank, ?
Parameter 4-digits: Parameter 0 – 9, x, blank, ?
Parameter
Input the parameter values, aligning left, and fill with blank(s) for the remainder. (Be sure that four values are input for the
parameter.)
When the input parameter is not within an adjustable range, “ERR” returns. (Refer to “Response code format”.)
No problem to input any numerical value for “x” on the table.
parameter.)
When the input parameter is not within an adjustable range, “ERR” returns. (Refer to “Response code format”.)
No problem to input any numerical value for “x” on the table.
When “?” is input for some commands, the present setting value responds.
C1 C2 C3 C4 P1 P2 P3 P4
0
0
5
5
1
0
0
–
3
0
0
0
0
9
0
?
?
?
?
?
LC-37AD1E(E)-k
03.12.2, 1:35 PM
91
92
Commands
P
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
I
A
A
A
A
A
A
V
H
H
V
V
C
P
POWER OFF (STANDBY)
INPUT SWITCHING (TOGGLE)
TV (CHANNEL FIXED)
TV (CHANNEL SELECTION) (1 – 99)
INPUT1 – 4 (1 – 4)
PC
INPUT1 (CVBS)
INPUT1 (RGB)
INPUT2 (CVBS)
INPUT2 (Y/C)
INPUT3 (CVBS)
INPUT3 (Y/C)
INPUT3 (RGB)
INPUT3 (COMPONENT)
INPUT4 (AUTO)
INPUT4 (S-VIDEO)
INPUT4 (VIDEO)
TOGGLE
STANDARD
DYNAMIC
MOVIE
GAME
USER
VOLUME (0 – 60)
H-POSITION (AV) (
ⳮ10 – Ⳮ10)
H-POSITION (PC) (0 – 180)
V-POSITION (AV) (
ⳮ20 – Ⳮ20)
V-POSITION (PC) (0 – 99)
CLOCK (0 – 180)
PHASE (0 – 40)
POWER SETTING
INPUT SELECTION A
INPUT SELECTION B
AV MODE
SELECTION
SELECTION
VOLUME
POSITION
O
T
T
T
A
P
N
N
N
N
N
N
N
N
N
N
N
V
V
V
V
V
V
O
P
P
P
P
L
H
W
G
V
V
V
C
P
P
P
P
P
P
P
P
P
P
P
M
M
M
M
M
M
L
O
O
O
O
C
S
R
D
D
D
D
D
1
1
2
2
3
3
3
3
4
4
4
D
D
D
D
D
D
M
S
S
S
S
K
E
0
x
0
*
*
x
0
1
0
1
0
1
2
3
0
1
2
0
1
2
3
4
5
*
*
*
*
*
*
*
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
*
*
*
*
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
CONTROL ITEM
COMMAND
PARAMETER
CONTROL
CONTENTS
W
W
W
W
W
W
W
W
W
W
W
A
A
A
T
T
D
C
C
D
D
D
D
T
T
D
TOGGLE (AV)
NORMAL (AV)
ZOOM 14:9 (AV)
PANORAMA (AV)
FULL (AV)
CINEMA 16:9 (AV)
CINEMA 14:9 (AV)
NORMAL (PC)
FULL (PC)
DOT BY DOT (PC)
CINEMA (PC)
TOGGLE
ON
OFF
DUAL SCREEN OFF
DUAL SCREEN ON
DIRECT CHANNEL (1 – 99)
CHANNEL UP
CHANNEL DOWN
DTV (CHANNEL FIXED)
DTV SELECTION CHANNEL (1 – 999)
CHANNEL UP
CHANNEL DOWN
TEXT OFF
TEXT ON (TOGGLE)
DIRECT PAGE JUMP (100 – 899)
WIDE MODE
DOLBY VIRTUAL
DUAL SCREEN
CHANNEL
TEXT
I
I
I
I
I
I
I
I
I
I
I
C
C
C
W
W
C
H
H
T
T
T
T
E
E
C
D
D
D
D
D
D
D
D
D
D
D
D
D
D
I
I
C
U
D
V
V
U
D
X
X
P
E
E
E
E
E
E
E
E
E
E
E
V
V
V
N
N
H
P
W
D
D
P
W
T
T
G
0
1
2
3
4
5
6
7
8
9
1
0
1
2
0
1
*
x
x
0
*
_
_
0
1
*
_
_
_
_
_
_
_
_
_
_
0
_
_
_
_
_
*
_
*
_
_
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
*
_
_
_
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
CONTROL ITEM
COMMAND
PARAMETER
CONTROL
CONTENTS
Appendix
NOTE
• If an underbar (_) appears in the parameter column, enter a space.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.
Return code (0DH)
Response code format
Normal response
Problem response (communication error or incorrect command)
Return code (0DH)
O
K
E
R
R
LC-37AD1E(E)-k
03.12.2, 1:35 PM
92
93
Appendix
SCART (INPUT 1)
1.
Audio right output
(TV Monitor out)
(TV Monitor out)
2.
Audio right input
3.
Audio left output
(TV Monitor out)
(TV Monitor out)
4.
Common earth for audio
5.
Earth for blue
6.
Audio left input
7.
Blue input
8. Audio-video control
9. Earth for green
10. Not used
11. Green input
12. Not used
13. Earth for red
14. Not used
15. Red input
16. Red/Green/Blue control
17. Earth for video
18. Earth for Red/Green/Blue
control
19. Video output
(TV Monitor out)
20. Video input
21. Plug shield
SCART (INPUT 2)
1.
Audio right output
2.
Audio right input
3.
Audio left output
4.
Common earth for audio
5.
Earth
6.
Audio left input
7.
Not used
8. Audio-video control
9. Earth
10. AV LINK control
11. Not used
12. Not used
13. Earth
14. Not used
15. Chroma S-Video input
16. Not used
17. Earth for video
18. Earth
19. TV Monitor output
20. Video input/S-video input
21. Plug shield
SCART (INPUT 3)
1.
Audio right output
2.
Audio right input
3.
Audio left output
4.
Common earth for audio
5.
Earth
6.
Audio left input
7.
Blue input
8. Audio-video control
9. Earth
10. Not used
11. Green input
12. Not used
13. Earth
14. Not used
15. Red input/Chroma S-Video
input
16. Red/Green/Blue control
17. Earth for video
18. Earth
19. TV Monitor output
20. Video input/S-video input
21. Plug shield
1 3 5 7 9 111315171921
2 4 6 8 101214161820
Connecting pin assignments for SCART
Various audio and video devices may be connected via the SCART terminals.
LC-37AD1E(E)-k
03.12.2, 1:36 PM
93
94
Appendix
Item
37o LCD COLOUR TV, Model:LC-37AD1E
Video Colour System
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
Function
Function
38.9 MHz (B/G, D/K, I, L) 38.9 MHz (L’)
TV-standard
(CCIR)
(CCIR)
Specifications
LCD panel
37o Advanced Super View & BLACK TFT LCD
Number of dots
3,147,264 dots (1366 g 768 g 3 dots)
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
units. There may be some deviations from these values in individual units.
Optional accessories
The listed optional accessories are available for the LCD
colour TV. Please purchase them at your nearest shop.
• Additional optional accessories may be available in near
colour TV. Please purchase them at your nearest shop.
• Additional optional accessories may be available in near
future. When purchasing, please read the newest
catalogue for compatibility and check the availability.
catalogue for compatibility and check the availability.
No.
Wall mount bracket
Part name
Part number
1
AN-37AG1
System cable
(7 meters)
(7 meters)
2
AN-07SC1*
VHF/UHF
E2–E69ch, F2–F10ch, I21–I69ch, IR A–IR Jch, (Digital: E5-E69ch)
CATV
Hyper-band, S1–S41ch
TV-Tuning System
Auto Preset 99 ch, Auto Label, Auto Sort
STEREO/BILINGUAL
NICAM/A2
Receiving
Channel
Channel
Brightness
430 cd/m
2
Backlight life
60,000 hours (at Manual 0 position)
Viewing angles
H : 170° V : 170°
Audio amplifier
10W g 2
Speakers
Ø 8 cm 2pcs, Ø 2.5 cm 2pcs
Analogue
Digital
36.13 MHz (Centre)
Terminals
SCART (AV input, RGB in, TV output)
INPUT 2
UHF/VHF 75 q Din type (Digital)
INPUT 3
SCART (AV input/output, S-VIDEO input, RGB input), Component
ANTENNA OUT
UHF/VHF 75 q Din type
INPUT 4
S-VIDEO, AV input
Rear
INPUT 1
Front
AVC
System
System
AV OUTPUT
Audio (Variable, Fixed), AV output
DC OUTPUT
DC6.5V 7W MAX
UHF/VHF 75 q Din type (Analogue)
ANTENNA IN
SCART (AV input/output, S-VIDEO input, AV Link)
ANTENNA IN
SP OUTPUT
External speaker output terminal. (L and R)
IMPORTANT
* You cannot use external speakers when you are using
optional system cable (AN-07SC1).
Digital-AUDIO
OUTPUT
OUTPUT
Digital audio output
C.I. (Common
Interface)
Interface)
EN50221, R206001
PC
15 Pin mini D-Sub, Audio input (Ø 3.5mm jack)
OSD language
English/German/French/Italian/Spanish/Dutch/Swedish/Portuguese/Finnish/Turkish
Power Requirement
AC 220–240 V, 50/60 Hz
Power
Consumption
Consumption
40 W (1.1W Standby)
Weight
6.1 kg (w/o stand), 6.2 kg (with stand)
Accessories
Operation manual, Remote control unit (g1), System cable (g1), AC cord (g2), “AA”
size battery (g2), AVC system stand unit (g1), Cable clamp (Large g1, Small g1),
Antenna cable (g1)
size battery (g2), AVC system stand unit (g1), Cable clamp (Large g1, Small g1),
Antenna cable (g1)
Headphones
Ø 3.5mm jack
AVC System
Display
AVC System
Display
135 W (0.8W Standby) (Method IEC60107)
16.9 kg (Display only), 20.4 kg (with Display and speakers), 25.0 kg (with Display,
speakers and stand)
speakers and stand)
LC-37AD1E(E)-k
03.12.2, 1:36 PM
94
Click on the first or last page to see other LC-37AD1E (serv.man34) service manuals if exist.