DOWNLOAD Sharp LC-37AD1E (serv.man34) Service Manual ↓ Size: 5.04 MB | Pages: 101 in PDF or view online for FREE

You can display several subtitles as they are
transmitted.

Press [ to display the subtitle.

• Subtitle is updated by the information sent by

the broadcasting station.

• To stop updating Subtitle automatically, press

d.

Press [ to exit the subtitle screen.

When receiving TOP Teletext, you can read a TOP text
overview.

Press m to display Teletext.

Press  l to display the TOP Overview as
shown below.

Select the desired block or group by using
a/b/c/d.

Press  OK to display the selected block or
group pages.

Press l to exit the TOP Overview screen.

• Subtitle will not be displayed when the service does not

contain the subtitle information.

LC-37AD1E(E)-j

03.12.2, 1:34 PM

87

You can display the time information included in the
Teletext. Follow the steps below to display the time.

Select a TV channel providing Teletext
information.
(The time information is automatically
captured.)

Press  p. The channel display will appear
on the Display.

Press  p again within the three-second
interval the channel display is on the screen.
Time information will display on the lower left
of the screen for about three seconds.

Even when you change the TV channel, you
can display the time information with steps
2 – 3 above.

• The time is not captured when a selected channel has no

Teletext information.

• The time display cannot be stored once the power is

turned off. When you turn on the power, perform steps 1 –
4 again.

• If receiving a digital broadcast, you can only display the

time by performing steps 2 and 3 below.

LC-37AD1E(E)-j

03.12.2, 1:34 PM

88

• No power.

• Unit cannot be operated.

• Remote control unit does not

operate.

• Picture is cut off.

• Strange colour, light colour, or

dark, or colour misalignment.

• Power is suddenly turned off.

• No picture.

• No sound.

• The DTV menu screen is

displayed in monochrome and
hard to select the item.

• Make sure the Display and the AVC System are connected correctly. (See page

8.)

• Check if you pressed B on the remote control unit. (See page 21.)

If the indicator on the Display lights up red, press B.

• Is the AC cord disconnected? (See page 13.)

• Has the main power been turned on? (See page 21.)

• External influences such as lightning, static electricity, etc., may cause  improper

operation. In this case, operate the unit after first turning the power off the Display
and the AVC System, or unplugging the AC cord and re-plugging it in after 1 or
2 minutes.

• Are batteries inserted with polarity (e, f) aligned? (See page 12.)
• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or fluorescent lighting?

• Is a fluorescent light illuminated to remote control sensor?

• Is the image position correct? (See page 71.)

• Are screen mode adjustments such as picture size made correctly? (See pages

76 to 79.)

• Adjust the picture tone. (See pages 53 to 57 and 82.)

• Is the room too bright? The picture may look dark in a room that is too bright.

• Check the colour system setting. (See pages 31 and 75.)

• Check the input signal setting. (See page 73.)

• The unit’s internal temperature has increased.

Remove any objects blocking vent or clean.

• Check the power control setting. (See pages 60 and 61.)

• Check the sleep timer setting. (See page 81.)

• Is connection to other components correct? (See pages 62 to 68.)

• Has input signal setup been done correctly after connection? (See page 73.)

• Is the correct input selected? (See page 73.)

• Is a non-compatible signal being input? (See page 90.)

• Is picture adjustment correct? (See pages 53 to 57.)

• Is the antenna connected properly? (See page 13.)

• Is the volume too low? (See page 24.)

• Is “Variable” selected in “Audio Out”? (See page 81.)

• Is the speaker connected properly?

• Is speaker selection correct? (See page 70.)

• Check if “Monochrome” is set to “On”. If so, set it to “Off”. (See page 55.)

• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear

slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight

or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: –20°C to +60°C (–4°F to +140°F).

LC-37AD1E(E)-k

03.12.2, 1:35 PM

89

Apple and Macintosh are registered trademarks
of Apple Computer, Inc.
DDC is a registered trademark of Video Electronics
Standards Association.
Power Management is a registered trademark of
Sun Microsystems, Inc.
VGA and XGA are registered trademarks of
International Business Machines Co., Inc.

PC/MAC

Resolution

Horizontal Frequency Vertical Frequency

VESA Standard

PC

31.5 kHz
37.9 kHz
31.5 kHz
37.9 kHz
31.5 kHz
37.9 kHz
37.5 kHz
43.3 kHz
31.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
53.7 kHz
48.4 kHz
56.5 kHz
60.0 kHz
68.7 kHz
45.0 kHz
48.1 kHz
48.4 kHz
64.0 kHz
34.9 kHz
49.7 kHz
60.2 kHz

640 x 400

720 x 400

VGA

640 x 480

WVGA

848 x 480

SVGA

800 x 600

1024 x 768

XGA

1280 x 720

WXGA

1280 x 768

SXGA

1280 x 1024

VGA

640 x 480

MAC13"

XGA

1024 x 768

MAC19"

SVGA

832 x 624

MAC16"

60 Hz
85 Hz
60 Hz
85 Hz
60 Hz
72 Hz
75 Hz
85 Hz
60 Hz
56 Hz
60 Hz
72 Hz
75 Hz
85 Hz
60 Hz
70 Hz
75 Hz
85 Hz
60 Hz
60 Hz
60 Hz
60 Hz
67 Hz
75 Hz
75 Hz

O

O
O
O
O
O

O
O
O
O
O
O
O
O
O

O

1366 x 768

LC-37AD1E(E)-k

03.12.2, 1:35 PM

90