Sharp MX-PE10 FIERY (serv.man46) Service Manual / Technical Bulletin ▷ View online
Page 3 of 4
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
2 Functionality to access to digital contents stored on copy-protected read-only media
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
©2012 Electronics For Imaging
Customer Support
Release Note
5. In EFI driver <Jobinfo>tab, set <User Windows> as <10000>
6. In EFI driver <Jobinfo>tab, set <Password>as 0<10000>
7. Close UI by OK and execute print
8. Check the display of CWS
6. In EFI driver <Jobinfo>tab, set <Password>as 0<10000>
7. Close UI by OK and execute print
8. Check the display of CWS
Results:
Although job stops by limitation, an alert is not shown on CWS
Although job stops by limitation, an alert is not shown on CWS
5. Printing attached testfile gets hung in Waiting to print
Steps to reproduce the Issue:
1. Import a specific Test File to the Hold queue and print it.
Result:
Job gets hung in waiting to print.
6. Re-linearize all screens
Steps to reproduce the Issue:
1. Please re-linearize all screens
Result:
All screens are not Re-linearized.
7. Full bleed paper size unselectable in Paper Catalog
1. Launch CWS
2. Go to paper Catalog
3. Select the paper size drop down box
4. Check for Full bleed paper sizes
Results:
Full bleed paper sizes are missing in paper size list.
2. Go to paper Catalog
3. Select the paper size drop down box
4. Check for Full bleed paper sizes
Results:
Full bleed paper sizes are missing in paper size list.
Page 4 of 4
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
Customer Support
Release Note
Before installing MX_PE_10_SP1.exe
1 Known issues listed below, read before installing MX_PE_10_SP1.exe patch:
•
None.
2 The following prerequisite(s) must be installed in the order specified before applying 1-
MX_PE_10_SP1.exe patch:
• None
3 Do NOT install any of the following patch(es) after installing MX_PE_10_SP1.exe patch. If
you must install any of the patch(es) below, do so before installing MX_PE_10_SP1.exe
patch:
patch:
• 1-1KM7HP.exe
4 This patch is Exclusive which means it must be installed independently and the server
rebooted/restarted once. After which, other patches can be applied to the server.
Patch installation instructions
1 Make sure that the Fiery printer controller reaches Idle.
2 Execute MX_PE_10_SP1.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
2 Execute MX_PE_10_SP1.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
4 After the patch is downloaded and when prompted by the Fiery Patch Downloader, choose
Reboot. (If you choose to Restart later, make sure you manually reboot the server for the
changes to take effect)
changes to take effect)
5 Wait until the Fiery controller reaches Idle and print the Configuration page.
6 Verify that the System Updates Log section contains the patch Id as SP1.
6 Verify that the System Updates Log section contains the patch Id as SP1.
Page 4 of 4
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
Customer Support
Release Note
Before installing MX_PE_10_SP1.exe
1 Known issues listed below, read before installing MX_PE_10_SP1.exe patch:
•
None.
2 The following prerequisite(s) must be installed in the order specified before applying 1-
MX_PE_10_SP1.exe patch:
• None
3 Do NOT install any of the following patch(es) after installing MX_PE_10_SP1.exe patch. If
you must install any of the patch(es) below, do so before installing MX_PE_10_SP1.exe
patch:
patch:
• 1-1KM7HP.exe
4 This patch is Exclusive which means it must be installed independently and the server
rebooted/restarted once. After which, other patches can be applied to the server.
Patch installation instructions
1 Make sure that the Fiery printer controller reaches Idle.
2 Execute MX_PE_10_SP1.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
2 Execute MX_PE_10_SP1.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
4 After the patch is downloaded and when prompted by the Fiery Patch Downloader, choose
Reboot. (If you choose to Restart later, make sure you manually reboot the server for the
changes to take effect)
changes to take effect)
5 Wait until the Fiery controller reaches Idle and print the Configuration page.
6 Verify that the System Updates Log section contains the patch Id as SP1.
6 Verify that the System Updates Log section contains the patch Id as SP1.
Page 4 of 4
Disclaimer
This hardware, software/patches, or technology may contain cryptographic functions as defined in Article 8 (ix) (h) because the cryptographic capability is
not user-accessible, and are designed to have only one or more of the following cryptographic functionality(ies):
1 Functionality to execute copy-protected programs
3 Functionality to access to encrypted and memorized digital contents on a medium that will be sold to the public with the same content
4 Functionality for copying control of copyright protected audio/video data
5 Functionality to encrypt and/or decrypt to protect libraries, design attributes, or associated data for the design of semiconductor devices or integrated
circuits
Customer Support
Release Note
Before installing MX_PE_10_SP1.exe
1 Known issues listed below, read before installing MX_PE_10_SP1.exe patch:
•
None.
2 The following prerequisite(s) must be installed in the order specified before applying 1-
MX_PE_10_SP1.exe patch:
• None
3 Do NOT install any of the following patch(es) after installing MX_PE_10_SP1.exe patch. If
you must install any of the patch(es) below, do so before installing MX_PE_10_SP1.exe
patch:
patch:
• 1-1KM7HP.exe
4 This patch is Exclusive which means it must be installed independently and the server
rebooted/restarted once. After which, other patches can be applied to the server.
Patch installation instructions
1 Make sure that the Fiery printer controller reaches Idle.
2 Execute MX_PE_10_SP1.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
2 Execute MX_PE_10_SP1.exe and follow the instructions in the Fiery Patch Downloader.
3 Notes about the Fiery Patch Downloader
a. Logon must be admin. This is fixed and cannot be modified.
b. Password is the Fiery administrator login password.
c. Hostname can be the IP address or the Fiery server name.
4 After the patch is downloaded and when prompted by the Fiery Patch Downloader, choose
Reboot. (If you choose to Restart later, make sure you manually reboot the server for the
changes to take effect)
changes to take effect)
5 Wait until the Fiery controller reaches Idle and print the Configuration page.
6 Verify that the System Updates Log section contains the patch Id as SP1.
6 Verify that the System Updates Log section contains the patch Id as SP1.
Display