Sharp MX-M904 / MX-M1204 (serv.man6) Handy Guide ▷ View online
Watermark Update
SHARP
Document Solution Centre
33
1. Using a PC, copy the Watermark Update firmware onto the root of a USB memory device:-
Caution: When copying the Watermark firmware/directories onto the USB drive,
do not change the folder hierarchy or files.
2. Insert the USB memory device into a USB port on the machine and execute
Simulation 49-05 [WATER MARK UPDATE]:-
Note: “If no USB device is detected, an error message will be displayed.
3. Select the Directory containing the Watermark update files:-
Watermark Update
34
SHARP
Document Solution Centre
4. The current and updated version should now be displayed. Press Execute to commence
upgrade:-
5. Update File Checking and a progress of the update will be displayed:-
6. Once the update is complete, press OK to exit simulation mode.
Watermark Update is complete.
HDD Replacement Procedure
SHARP
Document Solution Centre
35
Most data that is stored on the HDD can be backed up and reinstalled following replacement or HDD
failure. If the HDD is operating normally before replacement, backup the data and then reinstall the data
onto the replacement HDD.
failure. If the HDD is operating normally before replacement, backup the data and then reinstall the data
onto the replacement HDD.
The HDD contains the following data:-
No.
Data
Backup Method
Data Reinstall Method
Reinstall
Operator
1
e-Manual
Cannot be backed up
Sim49-03
Service
2
Address book
Sim56-02 / Device cloning
/ Storage backup
Sim56-02 / Device cloning
/ Storage backup
Service
3
Image Send registration
data (Sender’s information,
meta data, etc.)
Sim56-02 / Device cloning
/ Storage backup
Sim56-02 / Device cloning
/ Storage backup
Service
4
User authentication
Account management
Sim56-02
Sim56-02
Service
5
Japanese FEP dictionary
Not available
—
6
Chinese FEP dictionary
Not available
—
7
JOB LOG
Perform via WEB PAGE
—
8
JOB completion list
Not available
—
9 New N/A (FSS) information
Not available
—
10
User font (Added)
Not available
Perform via WEB PAGE.
Service or
User
11
User macro
Not available
Perform via WEB PAGE
12
Document filing
Perform via WEB PAGE
Perform via WEB PAGE
13
System setting data
Sim56-02 / Device cloning
/ Storage backup
Sim56-02 / Device cloning
/ Storage backup
Service
14
Watermark
Cannot be backed up
Sim49-5
Service
15
User colour profile
Not available
Perform via WEB PAGE
Service
16
Mirroring information
(When the mirroring kit is
installed, the mirroring
information is written.)
Not available
Mirror information is
erased by forcible build or
by RIB BUSTER.
Service
17
Individual setting
information for direct WEB
browsing
Service
18
Cookie file for
OSA application
Service
19
eOSA application file
Reinstallation of
application
Service
20
User file saved in the SMB
server (NAS)
Service
21
FAX/Internet FAX reception
data
Sim66-62
—
HDD Replacement Procedure
36
SHARP
Document Solution Centre
HDD Replacement Procedure
1. Back up the HDD storage data before replacement:-
• Use SIM56-02 or device cloning/storage backup function to backup the Address book, Image
Send registration data and User authentication data to USB memory.
• When using the MFP Web Page, back up the Document Filing data, Font, Macro and JOB LOG
data to PC
2. When there is FAX/Internet Fax received data present, use SIM66-62 to backup the image data to
USB memory (PDF file), and then provide the PDF data to the user. (This data cannot be restored
to the machine).
to the machine).
3. Replace the HDD.
4. Power on / Boot the MFP Device:-
• For new HDD (from service parts) only, Formatting is automatically performed.
• When using an HDD from another MFP Device, U2-05 trouble will be displayed. Use SIM16 to
cancel U2-05 trouble and then format the HDD using SIM62-01.
5. Clear the FAX/SCANNER image memory by executing SIM66-10:-
This memory must be cleared for all models equipped with FAX/I-FAX and Network Scanner in order to
keep compliance between the HDD data and the image related memory.
keep compliance between the HDD data and the image related memory.
6. Install the E-Manual Data onto the HDD using SIM49-03.
7. Install Watermark data onto the HDD using SIM49-05:-
U2-60 trouble will be displayed when no Watermark data is present. After installing the
Watermark data, reboot the MFP and cancel U2-60 trouble by executing SIM16.
Watermark data, reboot the MFP and cancel U2-60 trouble by executing SIM16.
8. Import the storage data backed up in Step 1.
• Use SIM56-02 or device cloning/storage backup function to import the Address book, Image
Send registration data and User authentication data etc.
• Import the Document Filing data, User font and macro data - (The JOB LOG data can be backed
up but cannot be imported).
Click on the first or last page to see other MX-M904 / MX-M1204 (serv.man6) service manuals if exist.