Sharp MX-M904 / MX-M1204 (serv.man6) Handy Guide ▷ View online
SD Card Replacement Procedure
SHARP
Document Solution Centre
41
Only limited data that is stored on the SD Card can be backed up and reinstalled following replacement or
SD card failure. If the SD Card is operating normally before replacement, backup the data (prior to
replacing).
The SD Card includes the following data:-
SD card failure. If the SD Card is operating normally before replacement, backup the data (prior to
replacing).
The SD Card includes the following data:-
Partition
Number
Stored Data
Backup
Method
Data
Reinstall
Method
L-201
ICU firmware
data
ICU firmware
-
SIM49-01
(BOOT
cannot be
installed
again.)
I-201
FAX reception
data
FAX/Internet Fax reception image data
SIM66-62
-
Replacement Procedure:
When replacing the SD card, be sure to use the specified SD card supplied as a service part only.
The firmware required for booting the MFP device must be included on the SD card that is used in
this machine - Commercially available SD cards do not have this firmware data.
this machine - Commercially available SD cards do not have this firmware data.
1. When there is FAX/Internet Fax data received, use SIM66-62 to back up the image data to the USB
memory (PDF file type), and then provide the PDF data to the user. (The data cannot be restored to
the machine.)
the machine.)
2. Replace the SD card with a new one.
3. Upgrade the firmware to the latest version.
4. Use SIM66-10 to clear the image send memory. (This is in order to obtain consistency between
3. Upgrade the firmware to the latest version.
4. Use SIM66-10 to clear the image send memory. (This is in order to obtain consistency between
the HDD data and the image related memory.)
Notes:
•
If E7-07 trouble occurs and the error cannot be cancelled using SIM16, this may indicate an issue
or failure of the SD Card – replace the SD Card by following the procedure detailed above.
or failure of the SD Card – replace the SD Card by following the procedure detailed above.
SD Card Replacement Procedure
42
SHARP
Document Solution Centre
Only limited data that is stored on the CF Card can be backed up and reinstalled following replacement or
CF card failure. If the CF Card is operating normally before replacement, backup the data and then
reinstall the data onto the replacement CF Card.
CF card failure. If the CF Card is operating normally before replacement, backup the data and then
reinstall the data onto the replacement CF Card.
Partition
Number
Stored Data
Backup
Method
Data
Reinstall
Method
L-101
ICU firmware
data
ICU firmware (Including OS section)
-
SIM49-01
(BOOT
cannot be
installed
again.)
S-101
ICU firmware
fixed data (Pre-
install)
Font
-
SIM49-01
Web help
-
SIM49-01
SPDL
-
SIM49-01
Option Font ROM
-
SIM49-01
UI Action Script main program
-
SIM49-01
UI screen information (XML)
-
SIM49-01
Flash image
-
SIM49-01
Flash language data
-
SIM49-01
Flash guidance animation
-
SIM49-01
S-102
System Data
Setting value data file (System setting/SIM
setting data (Image quality
adjustment)/FAX Soft SW)
setting data (Image quality
adjustment)/FAX Soft SW)
SIM56-02
SIM56-02
Replacement Procedure:
When replacing the CF card, be sure to use the specified CF card supplied as a service part only.
The firmware required for booting the MFP device must be included on the CF card that is used in
this machine - Commercially available CF cards do not have this firmware data.
this machine - Commercially available CF cards do not have this firmware data.
1. Use SIM56-02 to backup the CF card data to the USB memory.
2. When the operation panel home screen has been customised, backup the CF card data by using
2. When the operation panel home screen has been customised, backup the CF card data by using
the device cloning function.
3. Replace the CF card with a new one.
4. Upgrade the firmware to the latest version.
5. Use SIM56-02 to restore the data backed up in procedure 1.
6. Restore the data backed up in procedure 2 by using the device cloning function.
4. Upgrade the firmware to the latest version.
5. Use SIM56-02 to restore the data backed up in procedure 1.
6. Restore the data backed up in procedure 2 by using the device cloning function.
Note:
•
If E7-A6 trouble occurs and the error cannot be cancelled, this may indicate an issue or failure of
the CF Card – replace the CF Card by following the procedure detailed above.
the CF Card – replace the CF Card by following the procedure detailed above.
Firmware & Print Driver Revision
SHARP
Document Solution Centre
43
Engine Firmware:
Firmware ROM
ICUM MAIN
02.00.h2
ICUM BOOT
02.00.h2
ICU1 MAIN
02.00.h2
ICU1 BOOT
01.01.h2
PCU
02.00.h2
SCU
01.00.h2
SPF
01.00.h2
UI CONTENTS
02.00.h2
LCC
01.00.S1
LCC A3 [MX-LCX3N]
01.01.S1
LCT [MX-LC13]
01.07.S1
INSERTER [MX-CF11]
01.03.01
FOLDING UNIT [MX-FD10]
01.01.01
FINISHER [4K MAIN]
01.09.01
SADDLE
01.05.01
TRIMMER [MX-TM10]
01.01.01
STACKER UNIT [MX-ST10]
01.03.02
PUNCH [4K MAIN]
01.01.01
FAX MAIN [MX-FX11]
01.01.G1
DATA SECURITY KIT [MX-FR38U]
TBD
ACU [MX-EB11]
04.00.A1
WATERMARK
01.00.h2
E-MANUAL
01.30.h2
Print Driver:
Driver
Windows OS x86
XP, 2008, Vista, 7
Windows OS x64
XP, 2008(R2), Vista, 7
PCL6
02.00.10.13 [WHQL]
02.00.12.13 [WHQL]
PS
02.00.10.13 [WHQL]
02.00.12.13 [WHQL]
PPD
1.3.0.0 [WHQL]
1.3.0.0 [WHQL]
PC-Fax
3.7.18.4
3.7.18.4
TWAIN
3.01.004.000 [WHQL]
3.01.004.000 [WHQL]
XPS **
01.03.37.01 [WHQL]
01.03.37.01 [WHQL]
Note: ** XPS driver supports Windows Vista only.
For the latest Firmware and Print Driver version(s),
For the latest Firmware and Print Driver version(s),
please refer to the SHARP Support Website.
Test Simulation
44
SHARP
Document Solution Centre
The following pages contain information regarding test simulations. For a detailed description for each
test simulation, please refer to the MX-M904/1054/1204 Service Manual.
Simulation Entry Method:
test simulation, please refer to the MX-M904/1054/1204 Service Manual.
Simulation Entry Method:
1. Double-click the [HOME] key. (Total use quantity/Toner remaining quantity display mode screen
will appear):-
2. Touch the VER display section (as indicated below):-
3.
Touch
keys:-
4. Enter a main SIM code with the 10-key pad then touch the START key or select a main code from
the SIM key list on the touch panel.
#
C
*
*
Click on the first or last page to see other MX-M904 / MX-M1204 (serv.man6) service manuals if exist.