DOWNLOAD Sharp MX-M654N / MX-M754N (serv.man4) Service Manual ↓ Size: 76.53 MB | Pages: 127 in PDF or view online for FREE

MX-M754N  IC card reader  27 – 3

NOTE: Adjust the position of USB connector that roughly in

the center of the holder. 
Bind up the cord on the inside of the holder.

Bind up the cords at the about 80mm from the end of  holder.

Bind up the cord into about 150 mm lengths. 
At that time, adjust the position of USB connector that roughly
in the center between the ends of card holder and the bind up
cord.

NOTE: The binding band direction is as follows.

Hook the left part of  holder B to the panel  and fix the right part
with the screw.

1)

Attach the upper cabinet front right and fix the screw.

1)

Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.

1)

Device registration

a)

Enter the card reader setting menu as shown below.

System Settings

User ControlAdministrator Login 

Card Reader Device Registration

b)

Press [Read] button.

c)

Disconnect the connector which links the machine and the
IC card reader, and then insert it back.

d)

Press [OK] button.

e)

Check to confirm that values are displayed on "Product
ID" and "Vender ID".

f)

Press [SUBMIT] button, and check to confirm that the suc-
cess dialog message is displayed.

2)

Setting

a)

Enter the card reader setting menu as shown below.

System Settings

User CONTROL

Administrator Login

Card Type/Card Reader Settings

b)

Check-mark "Use IC Card for Authentication".

c)

Press [Submit] button.

MEMO: There are two check methods of IC card recognition. Use
either one to check that the IC card reader is recognized.

1)

Enter the card reader setting menu as shown below.

Home

SettingsSystem SettingsUSB-Device Check

2)

Check to confirm that "Card Reader/Writer" is displayed.

Check to confirm that the icon of the card reader is displayed on the
system area of the home screen. 
(If there is no check-mark on "Use IC Card for Authentication," the
icon is not displayed.)

Screw

Screw

①

A

B

①

②

②

: ‘14/Dec

: ‘15/June

MX-M754N  IC card reader  27 – 4

NOTE: The following procedures are executed only when a

request is made by a user for customizing the data format
of IC card reading.

1)

Make the setting file for HID card reading. 

For the making procedures, refer to the Manual of Setting File
for HID Card Reading.

2)

Copy the setting file to a USB memory.

3)

Import the setting file for HID card reading to the machine.

a)

Enter the system settings menu as shown below:

Home

SettingsUser ControlAdministrator Login

Card Area Setting

b)

Connect the USB memory to the USB connector in the
operation section.

c)

Select the file made in procedure 1) above.

d)

Press [Execute] button. 
(The setting file for HID card reading is loaded.)

4)

Perform the operation check.

a)

While holding the IC card over the IC card reader, press
[Execute] button of "Card Scan Test".

b)

The IC card data are loaded. The test result is displayed
as shown below:

When an error occurs, troubleshoot the cause and remove the trou-
ble. Then perform the above procedures again. 

Possible causes for an error may be error of the IC card or
improper contents of the setting file for HID card reading.

This manual describes the following setting procedures for reading
data from an IC card by using the HID card reading function:

* Setting of the reading area of card data

* Setting for assignment of read data to the card ID and the facility

code

* If the above setting procedures are not completed, the default

setting is valid, reading all the data in the card and assigning to
the card ID.

The brief steps of the setting are:

* Make the setting file according to the format specified in this

manual.

* Import the setting file through web page or by using the system

setting of the machine, "HID user area setting"

Incase of System setting mode:

User control > Card area setting > Importing from the setup file

The format of the setting file should be as shown below:

Key name = Key value

* Use the template setting file, change the key value, make an

arbitrary file name with an arbitrary extension (such as .ini), and
save the file.

* A line started with "#" or ";" is treated as a comment.

* A blank line may be inserted.

* Use one-byte alphanumeric characters only (except for comment

lines).

* A one-byte space may be inserted in front of and at the back of

"=" which connects the key name and the key value.

* Characters for the key value are case-insensitive. ("ABCD" is

considered as the same as "abcd".)

The section name (which is not changed in principle) and the key
name must be distinguished each other. 

* The size of the setting file must be 4KByte or less.

* For the keys which are not set, the column of the value must be

blank or the whole line may be deleted (commented out). 

*1: This manual describes only the setting of the HID card.

Card is not 
found.

Content

The card is not detected.

Remedy

Check to confirm that the card is securely 
inserted into the IC card reader.

Read Error.

Content

A read error occurs.

Remedy

Check to confirm that the card and the card 
reader operate normally with a personal 
computer, etc.

Read Success.

Card ID : XXXXX

Facility Code : XXXXX

General

Setting of the general information

Version

Setting file version (* Fixed to 1.0)

Card

Set as shown below depending on the kind of the card to be 
set. 

*1

Key value

Description

Felica FeliCa

Card

Hid HID

Card

Decoding\Facility
Code

Decode setting of the facility code. 
(* If the facility code is not used, there is no need to 
describe this item.)

Decoding\CardId

Decode setting of the card ID. 
(* If the card ID is not decoded and all the read data 
are used for the card ID, there is no need to describe 
this item.)

Location

Location specifying method
ByPosition: Specifying by position
ByDelimiter: Specifying by delimiter
* If the facility code has no setting of this item, it is 

NULL.

* If the card ID has no setting of this item, all the data 

read from the card is made the card ID.

Position

Start position (1 - 128) is specified with a decimal 
number. 
(* Specified only when the location key value is 
"ByPosition".)
* The head is specified with 1 and later.

Length Position

The length of reading from the position specified with 
the key is specified with a decimal number (1 - 128). 
(* Specified only when the location key value is 
"ByPosition".)
* The total of this set value and the value specified 

with Position key must be 128+1 or less.

MX-M754N  IC card reader  27 – 5

For [Decoding\CardId] section, the same as above.

When Data = #!abcde$12345%vxxyz ;

Position = 3

Length = 5
Decoded Data = abcde
Example 2: Specification by delimiter

Start.Delimiter = $

End.Delimiter = %
Decoded Data = 12345

When Decoded Data = 12345 ;

Pre = #%

Post = abc
Padded Data = #%12345abc

After importing the user area setting to the machine, a test can be
executed to confirm that the cars is properly read. (* User control >
Card area setting > Card reading test (* Only the system settings of
the machine))

Execute "User control > Card area setting > Card scan test"

The result displays after completion of a test are described below.
(When reading is successfully completed, the content of data read
from the card is displayed. When reading is failed, an error display
is made.)

Read Success.

Card ID: XXXXXX

Facility Code: XXXXXX

* When card reading is successfully completed, the result is indi-

cated as shown above with the user information. Check to con-
firm that the displayed items are proper. If not, check the
improper item.

HID setting file template

The extension of “ini” should be added.

Start.Delimiter

Delimiter (Front) 
(* Specified only when the location key value is 
"ByDelimiter".)
* Only ASCII code printable characters can be used 

for specification.

End.Delimiter

Delimiter (Back)
(* Specified only when the location key value is 
"ByDelimiter".)
* Only ASCII code printable characters can be used 

for specification.

Padding\CardId

Card ID padding setting

Pre

Front padding (Max. 3 characters)
* Only ASCII code printable characters can be used 

for specification.

Post

Back padding (Max. 3 characters)
* Only ASCII code printable characters can be used 

for specification.

Card is not 
found.

Content 

Card is not found.

Remedy

Check to confirm that the card is securely set 
in the card reader.

Read Error.

Content 

A read error occurs.

Remedy

Check to confirm that the card and card 
reader operate normally with a personal 
computer, etc.

hid_template E

;; HID setting file

# General information setting

[General]

Version=1.0

Card=HID

# Decode setting of the facility code

[Decoding\FacilityCode]

Location=ByPosition

Position=1

Length=8

# Decode setting of the card ID

[Decoding\CardId]

Location=ByDelimiter

Start.Delimiter=!

End.Delimiter=?

# Card ID padding setting

[Padding\CardId]

Pre=@@@

Post=\\\

MX-M754N  MX-KB13 (KEYBOARD)  28 – 1

MX-M754N

Service Manual

 

*1: Not use for this installation.

NOTE: Before installation, be sure to turn both the operation and

main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation. 

1) Open the front cover.
2) Remove the screw and the cover.

3) Remove the screw and the cover.

4)

Remove the screw and the cover. Disconnect the connector.

5)

Remove the screw and the cover.

6)

Remove the screws.

7)

Remove the cover.

1

Keyboard unit

1

2

Wire saddle

2

3

Screw (M4 x 8 S-tight)

 *1

1

1

2

3

Ĭ

ĭ

Ĭ

Ĭ

Ĭ

ĭ

Ĭ

ĭ

Ĭ

Į

Į

Ĭ

Ĭ

Ĭ

ĭ