Sharp MX-M654N / MX-M754N (serv.man4) Service Manual ▷ View online
MX-M754N MX-RB24 (PAPER PASS UNIT), MX-FN17 (INNER FINISHER) 19 – 5
3) Fix the rail on the R side with the screw (M4 x 7 S tight).
When attaching the rail on the R side, lift it slightly so that
there is no clearance between the rail on the R side and the
machine frame.
there is no clearance between the rail on the R side and the
machine frame.
4) Attach the left rear cover, and fix it with the screw (M4 x 7 S
tight).
Check to confirm that the I/F cable is in the concave section in
the left rear cover.
the left rear cover.
E. Connector connection
1) Remove the protection material and the fixing tape from the
connector.
2) Remove the connector cover of the machine.
3) Connect the connector of the finisher to the machine, fix it with
the screw.
4) Close the Open/Close cover.
Ĭ
ĭ
Ĭ
ĭ
ĭ
Ĭ
ĭ
Ĭ
ĭ
Ĭ
ĭ
2
: ‘15/Feb
MX-M754N MX-RB24 (PAPER PASS UNIT), MX-FN17 (INNER FINISHER) 19 – 6
5) Install cover back to the original position and close the front
cover..
F. Staple position label attachment
1) Attach the staple position label (for the scanner).
2) Attach the staple position label (for the RSPF).
G. Turn ON the power of the main unit
1) Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
power switch.
2) Set a value of "G" of Sim26-50 in "1" at the time of inner fin-
isher connection.
Ĭ
ĭ
ĭ
Į
Fit with the corner R.
First label
Fit with the corner R.
Label attachment reference
* Corner of the upper
cabinet bottom
2
: ‘15/Feb
MX-M754N MX-PUX1 (XPS EXPANSION KIT) 20 – 1
MX-M754N
Service Manual
[20] MX-PUX1 (XPS EXPANSION KIT)
1. Unpacking
A. Packed items check
2. Installation
A. Enable setting of functions
1) Enter the product key to enable the functions.
a)
Enter the system setting mode.
b)
The machine enters the product key input mode.
c)
Enter the product key.
d)
Press the registration key.
2) After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.
the main power switch.
3) Turn ON the main power switch and the power switch on the
operation panel.
B. Confirmation of function enable
Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.
firm that the set functions are enable.
No.
Name
Quantity
1
CD-ROM
1
2
Operation manual
1
3
Product key sheet
1
1
2
3
MX-M754N MX-PF10 (BARCODE FONT KIT) 21 – 1
MX-M754N
Service Manual
[21] MX-PF10 (BARCODE FONT KIT)
1. Unpacking
A. Packed items check
2. Installation
A. Enable setting of functions
1) Enter the product key to enable the functions.
a)
Enter the system setting mode.
b)
The machine enters the product key input mode.
c)
Enter the product key.
d)
Press the registration key.
2) After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.
the main power switch.
3) Turn ON the main power switch and the power switch on the
operation panel.
B. Confirmation of function enable
Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.
firm that the set functions are enable.
No.
Name
Quantity
1
CD-ROM
1
2
Product key sheet
1
Font No.
Font name
1
Code128TT-Regular
2
Code128-NarrowTT-Regular
3
Code128-WideTT-Regular
4
Code39HalfInch-Regular
5
Code39OneInch-Regular
6
Code39QuarterInch-Regular
7
Code39SmallHigh-Regular
8
Code39Slim-Regular
9
Code39SmallLow-Regular
10
Code39SmallMedium-Regular
11
Code39Wide-Regular
12
Codabar-Regular
13
Interleaved2of5-Regular
14
Interleaved2of5-Thin-Regular
15
OCR-A
16
OCR-B
17
OCR-B-C39-Regular
18
UPC-Half
19
UPC-Half-Bars
20
UPC-HalfMusic
21
UPC-HalfNarrow
22
UPC-HalfThin
23
UPC-Tall-Regular
24
UPC-TallBarsThin-regular
25
UPC-TallMusicThin-Regular
26
UPC-TallNarrow-Regular
27
UPC-TallThin-regular
28
ZipCodeBarcode-Regular
1
2
Click on the first or last page to see other MX-M654N / MX-M754N (serv.man4) service manuals if exist.