Sharp MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man10) Service Manual ▷ View online
MX-M350/M450 N/U SIMULATION 9 - 37
Operation/Procedure
1) Select the number corresponding to the copy density adjust-
ment level with 10-key. (Select one of 3 - 11.)
2) Press [START] key.
3) Enter the copy density level with 10-key.
4) Press [P] key or [START] key.
The adjustment value is set.
When [START] key is pressed, copying is perfumed and the
adjustment value is set simultaneously.
adjustment value is set simultaneously.
Check the density of printed copy image.
To select paper (paper feed tray), perform the following proce-
dures.
dures.
1) Enter 0 with 10-key.
2) Press [START] key. (The mode is changed to the paper feed
tray selection mode.)
3) Enter the number corresponding to the paper feed tray to be
used with 10-key.
4) Press [START] key. (The paper feed tray is selected.)
NOTE: When [P] key is pressed after entering an adjustment value
in this simulation, the adjustment value is set. When
START key is pressed, the adjustment value is set and
copying is performed.
START key is pressed, the adjustment value is set and
copying is performed.
Select 2, and press [START] key.
Press [START] key, or
press [SYSTEM SETTINGS] key.
press [SYSTEM SETTINGS] key.
SIMULATION 46-9
Select other than 0 - 2, and
press [START] key.
press [START] key.
Press
[SYSTEM SETTINGS] key.
[SYSTEM SETTINGS] key.
SIMULATION 46-9
EXP. LEVEL SETUP (CHAR.2). INPUT VALUE 0-99, AND PRESS
START.
3. 1.0
Press [START] key.
SIMULATION 46-9
EXP. LEVEL SETUP (CHAR.2). NOW COPYING.
50
Press [SYSTEM SETTINGS] key,
or terminate copying.
or terminate copying.
SIMULATION 46-9
EXP. LEVEL SETUP (CHAR.2). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
Press [START] key, or
press [SYSTEM SETTINGS] key.
press [SYSTEM SETTINGS] key.
1
Select 0, and
press [START] key.
press [START] key.
1
Select 1,
and press
[START] key.
and press
[START] key.
EXP. LEVEL SETUP (CHAR.2). SELECT 0-11, AND PRESS START.
0. TRAY SELECT
1
1. COPY START
2. EXP LEVEL
1
3. 1.0
50
4. 1.5
50
5. 2.0
50
6. 2.5
50
7. 3.0
50
8. 3.5
50
9. 4.0
50
10. 4.5
50
11. 5.0
50
SIMULATION 46-9
EXP. LEVEL SETUP (CHAR.2). SELECT 3-11, AND PRESS START.
(EXP. LEVEL SELECT)
3. 1.0 4. 1.5 5. 2.0
6. 2.5 7. 3.0 8. 3.5
9. 4.0 10. 4.5 11. 5.0
1
46-10
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density for each density
level (display value) in the copy mode (binary -
Text/Photo mode). An optional print density can be
set for each density level (display value).
level (display value) in the copy mode (binary -
Text/Photo mode). An optional print density can be
set for each density level (display value).
Item
Picture quality
Item
Set
range
Default
0
TRAY SELECT
Paper feed tray selection
1
COPY START
Copy START (Default)
2
EXP LEVEL
Exposure level selection
3
1.0
Exposure level 1.0
0 - 99
50
4
1.5
Exposure level 1.5
5
2.0
Exposure level 2.0
6
2.5
Exposure level 2.5
7
3.0
Exposure level 3.0
8
3.5
Exposure level 3.5
9
4.0
Exposure level 4.0
10 4.5
Exposure level 4.5
11 5.0
Exposure level 5.0
Normal display
NOW COPYING.
ERROR display
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
1
TRAY1
TRAY1
2
TRAY2
TRAY2
3
TRAY3
TRAY3
4
TRAY4
TRAY4
5
BPT
Manual feed
MX-M350/M450 N/U SIMULATION 9 - 38
Operation/Procedure
1) Select the number corresponding to the copy density adjust-
ment level with 10-key. (Select one of 3 - 11.)
2) Press [START] key.
3) Enter the copy density level with 10-key.
4) Press [P] key or [START] key.
The adjustment value is set.
When [START] key is pressed, copying is perfumed and the
adjustment value is set simultaneously.
adjustment value is set simultaneously.
Check the density of printed copy image.
To select paper (paper feed tray), perform the following proce-
dures.
dures.
1) Enter 0 with 10-key.
2) Press [START] key. (The mode is changed to the paper feed
tray selection mode.)
3) Enter the number corresponding to the paper feed tray to be
used with 10-key.
4) Press [START] key. (The paper feed tray is selected.)
NOTE: When [P] key is pressed after entering an adjustment value
in this simulation, the adjustment value is set. When
START key is pressed, the adjustment value is set and
copying is performed.
START key is pressed, the adjustment value is set and
copying is performed.
Select 2, and press [START] key.
Press [START] key, or
press [SYSTEM SETTINGS] key.
press [SYSTEM SETTINGS] key.
SIMULATION 46-10
Select other than 0 - 2, and
press [START] key.
press [START] key.
Press [SYSTEM SETTINGS] key.
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). INPUT VALUE 0-99, AND PRESS
START.
3. 1.0
Press [START] key.
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). NOW COPYING.
50
Press [SYSTEM SETTINGS] key,
or terminate copying.
or terminate copying.
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
Press [START] key, or
press [SYSTEM SETTINGS] key.
press [SYSTEM SETTINGS] key.
1
Select 0, and
press [START] key.
press [START] key.
1
Select 1,
and press
[START] key.
and press
[START] key.
EXP. LEVEL SETUP (MIX.2). SELECT 0-11, AND PRESS START.
0. TRAY SELECT
1
1. COPY START
2. EXP LEVEL
1
3. 1.0
50
4. 1.5
50
5. 2.0
50
6. 2.5
50
7. 3.0
50
8. 3.5
50
9. 4.0
50
10. 4.5
50
11. 5.0
50
SIMULATION 46-10
EXP. LEVEL SETUP (MIX.2). SELECT 3-11, AND PRESS START.
(EXP. LEVEL SELECT)
3. 1.0 4. 1.5 5. 2.0
6. 2.5 7. 3.0 8. 3.5
9. 4.0 10. 4.5 11. 5.0
1
46-11
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density for each density
level (display value) in the copy mode (binary -
Photo mode). An optional print density can be set
for each density level (display value).
level (display value) in the copy mode (binary -
Photo mode). An optional print density can be set
for each density level (display value).
Item
Picture quality
Density
Item
Set
range
Default
0
TRAY SELECT
Paper feed tray selection
1
COPY START
Copy START (Default)
2
EXP LEVEL
Exposure level selection
3
1.0
Exposure level 1.0
0 - 99
50
4
1.5
Exposure level 1.5
5
2.0
Exposure level 2.0
6
2.5
Exposure level 2.5
7
3.0
Exposure level 3.0
8
3.5
Exposure level 3.5
9
4.0
Exposure level 4.0
10 4.5
Exposure level 4.5
11 5.0
Exposure level 5.0
Normal display
NOW COPYING.
ERROR display
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
1
TRAY1
TRAY1
2
TRAY2
TRAY2
3
TRAY3
TRAY3
4
TRAY4
TRAY4
5
BPT
Manual feed
MX-M350/M450 N/U SIMULATION 9 - 39
Operation/Procedure
1) Select the adjustment item of FAX EXP. LEVEL with 10-key.
2) Press [START] key.
3) Enter the print density level with 10-key.
4) Press [P] key or [START] key.
The adjustment value is set.
When [START] key is pressed, printing is perfumed and the
adjustment value is set simultaneously.
adjustment value is set simultaneously.
Check the density of printed image.
NOTE: When the FAX print image density is adjusted with this sim-
ulation, the print image densities of all the FAX modes are
changed to the image density level set with this simulation.
changed to the image density level set with this simulation.
That is, the print image density of each FAX mode set with
SIM 46-13, 14, 15 is changed to the print image density
level adjusted with this simulation.
SIM 46-13, 14, 15 is changed to the print image density
level adjusted with this simulation.
To select paper (paper feed tray), perform the following proce-
dures.
dures.
1) Enter 0 with 10-key.
2) Press [START] key. (The mode is changed to the paper feed
tray selection mode.)
3) Enter the number corresponding to the paper feed tray to be
used with 10-key.
4) Press [START] key. (The paper feed tray is selected.)
NOTE: When [P] key is pressed after entering an adjustment value
in this simulation, the adjustment value is set. When
START key is pressed, the adjustment value is set and
copying is performed.
START key is pressed, the adjustment value is set and
copying is performed.
Select 2, and press [START] key.
Press [START] key, or
press [SYSTEM SETTINGS] key.
press [SYSTEM SETTINGS] key.
46-12
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density in the FAX mode
(all modes).
(all modes).
Item
Picture quality
Item
Set
range
Default
0 TRAY SELECT
Paper feed tray selection
1 COPY START
Copy START (Default)
2 FAX EXP. LEVEL FAX mode print density
0 - 99
50
SIMULATION 46-11
Select other than 0 - 2, and
press [START] key.
press [START] key.
Press [SYSTEM SETTINGS] key.
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). INPUT VALUE 0-99, AND PRESS
START.
3. 1.0
Press [START] key.
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). NOW COPYING.
50
Press [SYSTEM SETTINGS] key,
or terminate copying.
or terminate copying.
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
Press [START] key,
or press [SYSTEM SETTINGS] key.
or press [SYSTEM SETTINGS] key.
1
Select 0, and
press [START] key.
press [START] key.
1
Select 1,
and press
[START] key.
and press
[START] key.
EXP. LEVEL SETUP (PHOTO2). SELECT 0-11, AND PRESS START.
0. TRAY SELECT
1
1. COPY START
2. EXP LEVEL
1
3. 1.0
50
4. 1.5
50
5. 2.0
50
6. 2.5
50
7. 3.0
50
8. 3.5
50
9. 4.0
50
10. 4.5
50
11. 5.0
50
SIMULATION 46-11
EXP. LEVEL SETUP (PHOTO2). SELECT 3-11, AND PRESS START.
(EXP. LEVEL SELECT)
3. 1.0 4. 1.5 5. 2.0
6. 2.5 7. 3.0 8. 3.5
9. 4.0 10. 4.5 11. 5.0
1
Normal display
NOW PRINTING.
ERROR display
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
1
TRAY1
TRAY1
2
TRAY2
TRAY2
3
TRAY3
TRAY3
4
TRAY4
TRAY4
5
BPT
Manual feed
Select 0, and
press [START] key.
press [START] key.
Press [START] key, or
press [SYSTEM SETTINGS] key.
press [SYSTEM SETTINGS] key.
SIMULATION 46-12
EXP.LEVEL SETUP FAX(AUTO SET). SELECT 0-2, AND PRESS
START.
0.TRAY SELECT
1
1.COPY START
2.FAX EXP.LEVEL
50
Press [SYSTEM SETTINGS] key.
SIMULATION 46-12
EXP.LEVEL SETUP FAX(AUTO SET), INPUT VALUE 0-99, AND
PRESS START.
2.FAX EXP.LEVEL
50
1
Press [START] key.
Press [SYSTEM SETTINGS] key,
or terminate copying.
or terminate copying.
SIMULATION 46-12
EXP.LEVEL SETUP FAX(AUTO SET). NOW PRINTING.
Select 1, and
press [START] key.
press [START] key.
Select other than 0 - 1, and
press [START] key.
press [START] key.
SIMULATION 46-12
EXP.LEVEL SETUP FAX(AUTO SET).SELECT 1-5, AND PRESS
START.
(FEED TRAY)
1.TRAY1 2.TRAY2 3.TRAY3 4.TRAY4
5.BPT
MX-M350/M450 N/U SIMULATION 9 - 40
Operation/Procedure
1) Select the number corresponding to one of the following
adjustment items with 10-key.
∗
Manual mode (Print density adjustment level)
∗
Auto mode
2) Press [START] key.
3) Enter the print density level with 10-key.
4) Press [P] key or [START] key.
The adjustment value is set.
When [START] key is pressed, printing is perfumed and the
adjustment value is set simultaneously.
adjustment value is set simultaneously.
Check the density of printed image.
To select paper (paper feed tray), perform the following proce-
dures.
dures.
1) Enter 0 with 10-key.
2) Press [START] key. (The mode is changed to the paper feed
tray selection mode.)
3) Enter the number corresponding to the paper feed tray to be
used with 10-key.
4) Press [START] key. (The paper feed tray is selected.)
When the sum of the above set value (1 - 5) and 20 is set, the
mode is changed to the duplex print mode.
mode is changed to the duplex print mode.
NOTE: When [P] key is pressed after entering an adjustment value
in this simulation, the adjustment value is set. When
START key is pressed, the adjustment value is set and
copying is performed.
START key is pressed, the adjustment value is set and
copying is performed.
46-13
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the print density in the FAX mode
(each normal mode). (Only when FAX is installed.)
(each normal mode). (Only when FAX is installed.)
Item
Picture quality
Item
Set
range
Default
0
TRAY SELECT
Paper feed tray selection
1
PRINT START
Print start (Default)
2
EXP LEVEL
Exposure level selection
3
AUTO
Auto
0 - 99
50
4
1.0
Exposure level 1
5
2.0
Exposure level 2
6
3.0
Exposure level 3
7
4.0
Exposure level 4
8
5.0
Exposure level 5
Normal display
NOW PRINTING.
ERROR display
Door open
DOOR OPEN.
Jam
JAM
Paper empty
PAPER EMPTY.
1
TRAY1
TRAY1
2
TRAY2
TRAY2
3
TRAY3
TRAY3
4
TRAY4
TRAY4
5
BPT
Manual feed
Select 2, and
press [START] key.
press [START] key.
Press [START] key, or
press [SYSTEM SETTINGS] key.
press [SYSTEM SETTINGS] key.
SIMULATION 46-13
EXP.LEVEL SETUP FAX(NORMAL). SELECT 0-8, AND PRESS
START.
0.TRAY SELECT
1
1.PRINT START
2.EXP LEVEL
1
3.AUTO
50
4.1.0
50
5.2.0
50
6.3.0
50
7.4.0
50
8.5.0
50
50
1
1
Select 1,
and press
[START] key.
and press
[START] key.
Select 0, and press [START] key.
SIMULATION 46-13
EXP.LEVEL SETUP FAX(NORMAL),INPUT VALUE 0-99, AND
PRESS START.
4.1.0
SIMULATION 46-13
EXP.LEVEL SETUP FAX(NORMAL). NOW PRINTING.
SIMULATION 46-13
EXP.LEVEL SETUP FAX(NORMAL). SELECT 1-5, AND PRESS
START.
(FEED TRAY)
1.TRAY1 2.TRAY2 3.TRAY3 4.TRAY4
5.BPT
(ABOVE +20:DSPF MODE)
Select other than 0 - 2,
and press [START] key. Press [SYSTEM SETTINGS] key.
and press [START] key. Press [SYSTEM SETTINGS] key.
Press [START] key.
Press [SYSTEM SETTINGS] key,
or terminate copying.
or terminate copying.
Press [START] key, or
press [SYSTEM SETTINGS] key.
press [SYSTEM SETTINGS] key.
1
SIMULATION 46-13
EXP.LEVEL SETUP FAX(NORMAL). SELECT 3-8, AND PRESS START.
(EXP.LEVEL SELECT)
3.AUTO 4.1.0 5.2.0
6.3.0 7.4.0 8.5.0
Click on the first or last page to see other MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man10) service manuals if exist.