Sharp MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man10) Service Manual ▷ View online
MX-M350/M450 N/U SIMULATION 9 - 25
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
* = SPF, SCAN, STAPLER, PUNCH, STAMP
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
* = MAINTENANCE
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
* = DV CARTRIDGE
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
24-3
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to clear the number of use of the finisher,
SPF, and the scan (reading) unit.
SPF, and the scan (reading) unit.
Section
Item
Counter
1
SPF
SPF paper pass quantity
2
SCAN
Number of times of document scan
3
STAPLER
Number of times of stapling
4
PUNCH
Number of times of punching
5
STAMP
Number of times of SPF finish stamp
Press [START] key.
Press [SYSTEM SETTINGS] key or
[START] key.
[START] key.
24-4
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to reset the maintenance counter.
Item
Counter
1
MAINTENANCE
Maintenance counter
SIMULATION 24-3
ORG./STAPLE COUNTER DATA CLEAR. SELECT 1-5, AND PRESS
START.
1. SPF
2. SCAN
3. STAPLER
4. PUNCH
5. STAMP
START.
1. SPF
2. SCAN
3. STAPLER
4. PUNCH
5. STAMP
1
SIMULATION 24-3
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
Press [START] key.
Press [SYSTEM SETTINGS] key or [START] key.
24-5
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to reset the developer counter. (The
developer counter of the DV unit which is installed
is reset.)
developer counter of the DV unit which is installed
is reset.)
Section
Image process (Photoconductor/Developing/
Transfer/Cleaning)
Transfer/Cleaning)
Item
Counter
Developer
1
DV CARTRIDGE
Developer cartridge
Press [START] key.
Press [SYSTEM SETTINGS] key or [START] key.
24-6
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to reset the copy counter.
Item
Counter
Copy
SIMULATION 24-4
MAINTENANCE COUNTER DATA CLEAR. PRESS START.
1. MAINTENANCE
1
SIMULATION 24-4
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
SIMULATION 24-5
DEVELOPER COUNTER DATA CLEAR. PRESS START.
1. DV CARTRIDGE
1
SIMULATION 24-5
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
MX-M350/M450 N/U SIMULATION 9 - 26
* = COPY
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
After replacing the OPC drum, be sure to clear the OPC drum
counter.
counter.
* = DRUM
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
After replacing the OPC drum, be sure to clear the OPC drum
counter.
counter.
* = PRINTER, OTHERS
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
* = FAX SEND, FAX RECEIVED, FAX OUTPUT, SEND IMAGES,
SEND TIME, RECEIVE TIME
1
COPY
Copy effective paper counter
Press [START] key.
Press [SYSTEM SETTINGS] key or [START] key.
24-7
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to clear the OPC drum counter. (Perform this
simulation when the OPC drum is replaced.)
simulation when the OPC drum is replaced.)
Section
Image process (Photoconductor/Developing/
Transfer/Cleaning)
Transfer/Cleaning)
Item
Counter
Photo conductor
1
DRUM
OPC drum counter
Press [START] key.
Press [SYSTEM SETTINGS] key or [START] key.
24-9
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used clear the printer mode print counter and the
self print mode print counter.
self print mode print counter.
Section
Printer
Item
Counter
SIMULATION 24-6
COPY COUNTER DATA CLEAR. PRESS START.
1. COPY
1
SIMULATION 24-6
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
SIMULATION 24-7
DRUM COUNTER DATA CLEAR. SELECT1, AND PRESS
START.
1. DRUM
1
SIMULATION 24-7
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
1
PRINTER
Printer counter (Print mode)
2
OTHERS
Other effective paper counter (Self print mode)
Press [START] key.
Press [SYSTEM SETTINGS] key or [START] key.
24-10
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to clear the FAX counter. (Only when FAX is
installed)
installed)
Section
FAX
Item
Counter
1
FAX SEND
Number of times of FAX send
2
FAX RECEIVE
Number of times of FAX receive
3
FAX OUTPUT
FAX print quantity
4
SEND IMAGES
Send quantity
5
SEND TIME
Send time
6
RECEIVE TIME
Receive time
Press [START] key.
Press [SYSTEM SETTINGS] key or [START] key.
SIMULATION 24-9
PRINTER/OTHERS COUNTER DATA CLEAR. SELECT1-2, AND
PRESS START.
1. PRINTER
2. OTHERS
1
SIMULATION 24-9
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
SIMULATION 24-10
FAX COUNTER DATA CLEAR. SELECT1-6, AND PRESS START.
1. FAX SEND
2. FAX RECEIVED
3. FAX OUTPUT
4. SEND IMAGES
5. SEND TIME
6. RECEIVE TIME
1
SIMULATION 24-10
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
MX-M350/M450 N/U SIMULATION 9 - 27
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
* = DRUM ROTATION, DV ROTATION
Operation/Procedure
1) Select the counter to be cleared with 10-key.
2) Press [START] key.
The confirmation to clear is opened.
3) Select Yes/NO of counter clear with 10-key.
YES: Clear
NO: Not clear
4) Press [START] key.
* = NETWORK SCANNER ORIGINAL, MAIL, FTP, INTERNET-
FAX ORIGINAL COUNTER, INTERNET-FAX SEND,
INTERNET-FAX RECEIVE, INTERNET-FAX OUTPUT, SCAN
TO HDD, INTERNET-FAX SEND IMAGES, MAIL SEND
IMAGES, FTP SEND IMAGES, DOC FILING OUTPUT
INTERNET-FAX RECEIVE, INTERNET-FAX OUTPUT, SCAN
TO HDD, INTERNET-FAX SEND IMAGES, MAIL SEND
IMAGES, FTP SEND IMAGES, DOC FILING OUTPUT
Operation/Procedure
Press [START] key.
The developing motor and the OPC drum motor rotate, and the
toner concentration detection level and the humidity sensor detec-
tion level and the temperature sensor detection level are dis-
played.
toner concentration detection level and the humidity sensor detec-
tion level and the temperature sensor detection level are dis-
played.
24-11
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to reset the OPC drum rotation time, and the
DV unit rotation time counter. The developer
counter in the DV unit installed is reset.
DV unit rotation time counter. The developer
counter in the DV unit installed is reset.
Section
Image process (Photoconductor/Developing/
Transfer/Cleaning)
Transfer/Cleaning)
Item
Counter
Developer
1
DRUM ROTATION
OPC drum rotation time
2
DV ROTATION
DV unit rotation time
Press [START] key.
Press [SYSTEM SETTINGS] key or [START] key.
24-15
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to clear the counters related to the scan
mode and the Internet FAX mode.
mode and the Internet FAX mode.
Item
Counter
1
NETWORK SCANNER
ORIGINAL COUNTER
ORIGINAL COUNTER
Document scan quantity
counter in the network scanner
mode
counter in the network scanner
mode
2
MAIL COUNTER
Number of times of mail send
3
FTP COUNTER
Number of times of FTP send
4
INTERNET-FAX ORIGINAL
COUNTER
COUNTER
Internet FAX document scan
quantity (Total quantity of OC
and SPF)
quantity (Total quantity of OC
and SPF)
5
INTERNET-FAX SEND
Number of times of Internet
FAX send
FAX send
6
INTERNET-FAX RECEIVE Number of times of Internet
FAX receive
7
INTERNET-FAX OUTPUT
Internet FAX print quantity
8
SCAN TO HDD
SCAN TO HDD record quantity
9
INTERNET-FAX SEND
IMAGES
IMAGES
Internet FAX send quantity
counter
counter
SIMULATION 24-11
TIMER DATA CLEAR. SELECT1-2, AND PRESS START.
1. DRUM ROTATION
2. DV ROTATION
1
SIMULATION 24-11
* TIMER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
10 MAIL SEND IMAGES
MAIL send quantity counter
11 FTP SEND IMAGES
FTP send quantity counter
12 DOC FILING OUTPUT
Document filing print counter.
Press [START] key.
Press [SYSTEM SETTINGS] key or [START] key.
25
25-1
Purpose
Operation test/Check
Function
(Purpose)
(Purpose)
Used to check the operations of the developing
section (toner concentration, humidity and toner
concentration sensor, humidity sensor,
temperature sensor output can be monitored.)
section (toner concentration, humidity and toner
concentration sensor, humidity sensor,
temperature sensor output can be monitored.)
Section
Process (Developing section)
Item
Operation
Press [START] key.
Press [SYSTEM SETTINGS] key, and the
operation is stopped immediately or after 2 min.
operation is stopped immediately or after 2 min.
SIMULATION 24-15
NETWORK SCANNER AND INTERNET-FAX COUNTER CLEAR.
SELECT1-3, AND PRESS START.
1. NETWORK SCANNER ORIGINAL COUNTER
2. MAIL COUNTER
3. FTP COUNTER
4. INTERNET-FAX ORIGINAL COUNTER: ********
5. INTERNET-FAX SEND: ********
6. INTERNET-FAX RECEIVE: ********
7. INTERNET-FAX OUTPUT: ********
8. SCAN TO HDD: ********
9. INTERNET-FAX SEND IMAGES: ********
10. MAIL SEND IMAGES: ********
11. FTP SEND IMAGES: ********
12. DOC FILING OUTPUT: ********
1
SIMULATION 24-15
* COUNTER DATA CLEAR.
ARE YOU SURE?
1. YES
2. NO
1
SIMULATION 25-1
TONER SENSOR OUTPUT MONITOR. PRESS START.
HUMIDITY AREA :
70.0
-
72.5
TEMPERATURE AREA:
70.0
-
72.5
DEVE REFERENCE :
128
SIMULATION 25-1
DV MONITOR. EXECUTING···.
HUMIDITY AREA :
70.0
-
72.5
TEMPERATURE AREA:
70.0
-
72.5
DEVE REFERENCE :
128
MX-M350/M450 N/U SIMULATION 9 - 28
Operation/Procedure
1) Press [START] key.
The developing motor rotates for 2 min and the toner concen-
trations sensor makes sampling of toner concentration 16
times, and the detection level is displayed.
trations sensor makes sampling of toner concentration 16
times, and the detection level is displayed.
After the developing motor stops, the average value of toner
concentration sampling is set as the reference toner concen-
tration level.
concentration sampling is set as the reference toner concen-
tration level.
NOTE: When the above operation is interrupted on the way, the
reference toner concentration level is not set. Also when
error code of EE-EL or EE-EU is displayed, the reference
toner concentration level is not set normally.
error code of EE-EL or EE-EU is displayed, the reference
toner concentration level is not set normally.
(Default: 118)
2) The humidity near the developing tank at the developing
adjustment is registered.
Operation/Procedure
1) Select the number corresponding to the auditor mode with 10-
key.
2) Press [START] key.
(Default: 1)
Operation/Procedure
1) Select the number corresponding to the counter to be set with
10-key.
2) Press [START] key.
3) Select the count mode with 10-key.
4) Press [START] key.
Set the count-up (1 or 2) for A3/WLT paper.
(Select the target counter.)
(Count-up)
Operation/Procedure
1) Select the number corresponding to the destination with 10-
key.
2) Press [START] key.
After completion of setting, the machine is automatically reset.
25-2
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to make the initial setting of toner
concentration when replacing developer.
concentration when replacing developer.
Section
Image process (Photoconductor/Developing/
Transfer/Cleaning)
Transfer/Cleaning)
Press [START] key.
Press [SYSTEM SETTINGS] key, and the
operation is stopped immediately or after 2 min.
operation is stopped immediately or after 2 min.
26
26-3
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the specifications of the auditor.
Setting must be made according to the auditor use
conditions.
Setting must be made according to the auditor use
conditions.
Section
Auditor
Item
Specifications
1
P10
Built-in auditor mode
2
VENDOR
Coin vendor mode
3
OTHERS
Other
4
VENDOR-EX
Coin vendor mode (without temporarily
charge)
charge)
5
VENDOR-EX+
Coin vendor mode (without temporarily
charge) + Document filing function enable
charge) + Document filing function enable
6
VENDOR-EX
(MULTI JOB)
(MULTI JOB)
Coin vendor mode (No temporary charge)
+ (JOB queueing)
+ (JOB queueing)
7
VENDOR-EX
+ (MULTI JOB)
+ (MULTI JOB)
Coin vendor mode (No temporary charge)
+ Document filing enable + (JOB
queueing)
+ Document filing enable + (JOB
queueing)
SIMULATION 25-2
AUTOMATIC DV ADJUSTMENT. PRESS START.
HUMIDITY AREA :
70.0
-
72.5
TEMPERATURE AREA:
70.0
-
72.5
DEVE REFERENCE :
118
SIMULATION 25-2
AUTOMATIC DV ADJUSTMENT. EXECUTING···.
HUMIDITY AREA :
70.0
-
72.5
TEMPERATURE AREA:
70.0
-
72.5
DEVE REFERENCE :
118
26-5
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the count mode of the total counter
and the maintenance counter.
and the maintenance counter.
Item
Specifications
Counter
1
TOTAL COUNTER
Total counter
2
MAINTENANCE (DRUM)
COUNTER
COUNTER
Maintenance counter/ OPC
drum counter
drum counter
3
DV COUNTER
Developer counter
1
1 COUNT UP
1 count-up
2
2 COUNT UP
2 count-up
Default
Press [START] key.
Press [SYSTEM SETTINGS] key.
26-6
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the specifications (paper, document
detection, etc.) of the destination.
detection, etc.) of the destination.
Item
Specifications
Destination
1
USA
United States of America
2
CANADA
Canada
3
INCH
Inch series EX
4
JAPAN
Japan
5
AB_B
AB series B5
6
EUROPE
Europe
7
UK
UK
8
AUSTRALIA
Australia
SIMULATION 26-3
AUDITOR SETUP. SELECT 1-3, AND PRESS START.
1.P10
2.VENDOR
3.OTHERS
4.VENDOR-EX
5.VENDOR-EX+
1
SIMULATION 26-5
1
A3(LEDGER) COUNT UP MODE SETTING. SELECT 1-3, AND PRESS
START.
1. TOTAL COUNTER
2
2. MAINTENANCE(DRUM) COUNTER
2
3. DV COUNTER
2
SIMULATION 26-5
A3(LEDGER) COUNT UP MODE SETTING. SELECT 1-2, AND PRESS
START.
1. TOTAL COUNTER
(1: 1COUNT UP, 2: 2COUNT UP)
2
Click on the first or last page to see other MX-M350N / MX-M350U / MX-M450N / MX-M450U (serv.man10) service manuals if exist.