Sharp MX-M310 / MX-M310N (serv.man9) User Manual / Operation Manual ▷ View online
19
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
ENGLISH
8
Installation of the PCL6 printer
driver begins.
driver begins.
When the "Found New Hardware Wizard"
appears, select [Install the software
automatically (Recommended)], click the [Next]
button, and follow the on-screen instructions.
appears, select [Install the software
automatically (Recommended)], click the [Next]
button, and follow the on-screen instructions.
This completes the installation.
• After installing the printer driver, see
"CONFIGURING THE PRINTER DRIVER
FOR THE OPTIONS INSTALLED ON THE
MACHINE" (page 24) to configure the printer
driver settings.
FOR THE OPTIONS INSTALLED ON THE
MACHINE" (page 24) to configure the printer
driver settings.
• If you are using the machine as a shared
printer, see "USING THE MACHINE AS A
SHARED PRINTER" (page 22) to install the
printer driver on each of the client computers.
SHARED PRINTER" (page 22) to install the
printer driver on each of the client computers.
• If you are using Windows
Vista/Server 2008
If a security warning window
appears, be sure to click [Install this
driver software anyway].
If a security warning window
appears, be sure to click [Install this
driver software anyway].
• If you are using Windows
2000/XP/Server 2003
If a warning message regarding the
Windows logo test or digital
signature appears, be sure to click
the [Continue Anyway] or [Yes]
button.
If a warning message regarding the
Windows logo test or digital
signature appears, be sure to click
the [Continue Anyway] or [Yes]
button.
Note
Setup_multi.book 19 ページ 2009年7月7日 火曜日 午後2時8分
20
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
When installing the PCL5e printer driver, PS printer driver, PPD driver, or PC-Fax driver
Installation is possible even after the USB cable has been connected. When the software selection
screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL
SOFTWARE)" (page 7), perform the steps below.
Installation is possible even after the USB cable has been connected. When the software selection
screen appears in step 6 of "OPENING THE SOFTWARE SELECTION SCREEN (FOR ALL
SOFTWARE)" (page 7), perform the steps below.
1
Click the [Printer Driver] button.
To install the PC-Fax driver, click the [PC-Fax
Driver] button on the "Disc 2" CD-ROM.
Driver] button on the "Disc 2" CD-ROM.
* The above screen appears when using the
"Disc 1" CD-ROM.
2
Click the [Custom installation]
button.
button.
3
When you are asked how the
printer is connected, select
[Connected to this computer]
and click the [Next] button.
printer is connected, select
[Connected to this computer]
and click the [Next] button.
4
When the port selection window
appears, select the port that the
PCL6 printer driver is using
(USB001, etc.) and click the
[Next] button.
appears, select the port that the
PCL6 printer driver is using
(USB001, etc.) and click the
[Next] button.
Setup_multi.book 20 ページ 2009年7月7日 火曜日 午後2時8分
21
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
ENGLISH
5
When the printer driver selection
window appears, remove the
[PCL6] checkmark and select the
printer driver to be installed, and
then click the [Next] button.
window appears, remove the
[PCL6] checkmark and select the
printer driver to be installed, and
then click the [Next] button.
Click the checkbox of the printer driver to be
installed so that a checkmark (
installed so that a checkmark (
) appears.
6
Select whether or not you wish
the printer to be your default
printer and click the [Next]
button.
the printer to be your default
printer and click the [Next]
button.
If you are installing multiple drivers, select the
printer driver to be used as the default printer.
If you do not wish to set one of the printer
drivers as the default printer, select [No].
printer driver to be used as the default printer.
If you do not wish to set one of the printer
drivers as the default printer, select [No].
7
When the printer name window
appears, click the [Next] button.
appears, click the [Next] button.
If you wish to change the printer name, enter
the desired name.
the desired name.
8
When you are asked if you wish
to install the display fonts, select
[No] and click the [Next] button.
to install the display fonts, select
[No] and click the [Next] button.
When the PC-Fax driver is being installed, this
screen does not appear. Go to the next step.
screen does not appear. Go to the next step.
9
Follow the on-screen instructions.
Read the message in the window that appears
and click the [Next] button.
Installation begins.
and click the [Next] button.
Installation begins.
10
When the installation completed
screen appears, click the [OK]
button.
screen appears, click the [OK]
button.
11
Click the [Close] button in the
window of step 1.
window of step 1.
This completes the installation.
• After installation, see "CONFIGURING THE
PRINTER DRIVER FOR THE OPTIONS
INSTALLED ON THE MACHINE" (page 24)
to configure the printer driver settings.
INSTALLED ON THE MACHINE" (page 24)
to configure the printer driver settings.
• Make sure that the port of the installed driver
is the same as the port used by the PCL6
printer driver.
The port used by the printer driver of the
machine is indicated by a checkmark on the
[Ports] tab of the printer driver properties
window.
printer driver.
The port used by the printer driver of the
machine is indicated by a checkmark on the
[Ports] tab of the printer driver properties
window.
• If you installed the PS printer driver or the
PPD driver, the PS display fonts can be
installed from the "PRINTER UTILITIES"
CD-ROM that accompanies the PS3
expansion kit. See "INSTALLING THE PS
DISPLAY FONTS" (page 28).
installed from the "PRINTER UTILITIES"
CD-ROM that accompanies the PS3
expansion kit. See "INSTALLING THE PS
DISPLAY FONTS" (page 28).
• When the PC-Fax driver is being
installed, this screen does not
appear. Go to the next step.
appear. Go to the next step.
• The PS3 expansion kit is required to
use the PS printer driver or the PPD
driver.
driver.
Note
• If you are using Windows
Vista/Server 2008
If a security warning window
appears, be sure to click [Install this
driver software anyway].
If a security warning window
appears, be sure to click [Install this
driver software anyway].
• If you are using Windows
2000/XP/Server 2003
If a warning message regarding the
Windows logo test or digital signature
appears, be sure to click the
[Continue Anyway] or [Yes] button.
If a warning message regarding the
Windows logo test or digital signature
appears, be sure to click the
[Continue Anyway] or [Yes] button.
After the installation, a message
prompting you to restart your
computer may appear. If this message
appears, click the [Yes] button to
restart your computer.
prompting you to restart your
computer may appear. If this message
appears, click the [Yes] button to
restart your computer.
Note
Note
Setup_multi.book 21 ページ 2009年7月7日 火曜日 午後2時8分
22
INSTALLING THE PRINTER DRIVER / PC-FAX DRIVER
USING THE MACHINE AS A SHARED PRINTER
If you are going to use the machine as a shared printer on a Windows network with the printer driver or
the PC-Fax driver installed on a print server, follow the steps below to install the printer driver or the
PC-Fax driver on the client computers.
the PC-Fax driver installed on a print server, follow the steps below to install the printer driver or the
PC-Fax driver on the client computers.
When the software selection screen appears in step 6 of "OPENING THE SOFTWARE SELECTION
SCREEN (FOR ALL SOFTWARE)" (page 7), perform the steps below.
SCREEN (FOR ALL SOFTWARE)" (page 7), perform the steps below.
1
Click the [Printer Driver] button.
To install the PC-Fax driver, click the [PC-Fax
Driver] button on the "Disc 2" CD-ROM.
Driver] button on the "Disc 2" CD-ROM.
*The above screen appears when using the
"Disc 1" CD-ROM.
"Disc 1" CD-ROM.
2
Click the [Custom installation]
button.
button.
3
Select [Shared Printer] and click
the [Next] button.
the [Next] button.
4
Select the printer name
(configured as a shared printer).
(configured as a shared printer).
(1) Select the printer name
(configured as a shared printer
on a print server) from the list.
on a print server) from the list.
If you are using Windows 2000/XP/Server
2003, you can also click the [Add Network
Port] button displayed below the list and
select the printer to be shared by
browsing the network in the window that
appears.
2003, you can also click the [Add Network
Port] button displayed below the list and
select the printer to be shared by
browsing the network in the window that
appears.
(2) Click the [Next] button.
• Ask your network administrator for the server name and printer name of the machine on the network.
• For the procedure for configuring settings on the print server, see the operation manual or the
Help file of the operating system. The "print server" explained here is a computer that is
connected directly to the machine, and "clients" are other computers connected to the same
network as the print server.
connected directly to the machine, and "clients" are other computers connected to the same
network as the print server.
• Install the same printer driver on client computers as the printer driver that is installed on the print server.
Note
If the shared printer does not appear
in the list, check the settings on the
print server.
in the list, check the settings on the
print server.
(2)
(1)
Note
Setup_multi.book 22 ページ 2009年7月7日 火曜日 午後2時8分
Click on the first or last page to see other MX-M310 / MX-M310N (serv.man9) service manuals if exist.