Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man6) Service Manual ▷ View online
MX-M264U MX-VR11 (DOCUMENT COVER) 4 – 1
MX-M264U
Service Manual
[4] MX-VR11 (DOCUMENT COVER)
1. Unpacking
A. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Document cover unit attachment
1)
Attach the document cover unit to the main unit.
No.
Name
Quantity
1
Document cover unit
1
1
MX-M264U MX-DE17/DE18/DE24 (500/2x500 SHEET PAPER DRAWER) 5 – 1
MX-M264U
Service Manual
[5] MX-DE17/DE18/DE24 (500/2x500 SHEET PAPER DRAWER)
1. Unpacking
2. Installation
PARTS INCLUDED
Remove all pieces of fixing tape and fixing materials from the paper
feed unit.
feed unit.
Turn off the main switch of the copier and then remove the
power plug of the copier from the outlet.
power plug of the copier from the outlet.
A. Remove the rear cover from the copier
1)
Remove the two screws and then remove the rear cover from
the copier.
the copier.
B. Remove the rear cover from the optional paper
feed unit
1)
Remove the two screws and then remove the rear cover from
the optional paper feed unit.
the optional paper feed unit.
C. Remove the connector cover
1)
Remove the cover from the connector.
-8
$%
-8
$%
-8
$%
Fixing plates: 4 pcs.
Paper size label
Screws (M4 x 12): 8 pcs.
Cassette relay harness
(contained in the optional paper feed unit)
Rear cover
Screw
Screw
Rear cover
Screw
Screw
Connector cover
1 Å
2013.8.23
1
MX-M264U MX-DE17/DE18/DE24 (500/2x500 SHEET PAPER DRAWER) 5 – 2
D. Attach the copier
1)
Place the copier on the optional paper feed unit.
Lower the copier from straight above the optional paper feed
unit not to damage the gears on the optional paper feed unit
Lower the copier from straight above the optional paper feed
unit not to damage the gears on the optional paper feed unit
NOTE: The copier could hit the gears when the copier is not
lifted up enough and moved to the optional paper feed
unit.
unit.
2) Remove the rear cabinet.
3)
Check whether the gears of the copier and the optional paper
feed unit are meshed.
feed unit are meshed.
4)
Remove the second and third paper trays.
Connect the copier to the paper feed unit using four fixing
plates and two screws (M4 x 12) for each plate.
Connect the copier to the paper feed unit using four fixing
plates and two screws (M4 x 12) for each plate.
E. Connect the harness
1)
Connect the cassette interface harness contained in the
optional paper feed unit to the paper feed unit interface PWB.
optional paper feed unit to the paper feed unit interface PWB.
For two tray type
For one tray type
CHECK
Right of rear side
Screws
(M4 x 12)
Detailed view
Front side
Screws (M4 x 12)
Screws (M4 x 12)
Fixing plate
Fixing plate
Fixing plate
Screws
(M4 x 12)
Left of rear side
Fixing plate
Cassette relay harness
Cassette relay harness
MX-M264U MX-DE17/DE18/DE24 (500/2x500 SHEET PAPER DRAWER) 5 – 3
For DE24
F. Attach the rear covers of the copier and the
optional paper feed unit
1)
Attach the rear covers of the copier and the optional paper
feed unit using two screws respectively.
feed unit using two screws respectively.
G. Remove the securing fixture for packing the
paper feed unit and remove the packing
material
material
1)
Remove the securing fixture for packing that fixes the paper
pressure plate of the tray by rotating it in the direction of the
arrow and remove the packing material.
pressure plate of the tray by rotating it in the direction of the
arrow and remove the packing material.
NOTE: Be sure to remove the securing fixture before turning
on the power.
H. Change the paper size in the tray
1)
Hold the grip and slide the tray side plate to adjust it to the
paper to be used.
Then, fit the rear end plate to the specified size position.
paper to be used.
Then, fit the rear end plate to the specified size position.
Insert the power plug of the copier to the outlet and turn on the
main switch of the copier. Then, carry out the following proce-
dure.
main switch of the copier. Then, carry out the following proce-
dure.
I.
Load paper into the paper tray
1)
Do not exceed the maximum height line.
J. Check for center displacement
-
Set an original on the document glass and copy it using the
paper tray in the copier.
Then, copy an original using the attached optional paper feed
unit.
paper tray in the copier.
Then, copy an original using the attached optional paper feed
unit.
-
If the center of the copy image from the tray in the copier is dif-
ferent from that of the copy image from the optional paper feed
unit, carry out adjustment referring to the service manual.
ferent from that of the copy image from the optional paper feed
unit, carry out adjustment referring to the service manual.
Installation of Paper feed unit is now complete.
Rear cover
Rear cover
Screw
Screw
Securing fixture for packing
Packing material
Side plate
Rear plate
Click on the first or last page to see other MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man6) service manuals if exist.