DOWNLOAD Sharp MX-M160 / MX-M160D / MX-M160DK (serv.man4) Service Manual ↓ Size: 3.36 MB | Pages: 38 in PDF or view online for FREE

AR-PK10  12 - 1

For installing of the MX-PK10, install the network expansion kit (MX-
NB10) in advance.

A. Turn on the main power switch of the main unit.

B. Entering the product key

1. Visit the web page, click the "Admin mode".

2. Enter the user name and the password.

3. Click the "Product Key Setting".

4. Enter the product key, and click the "Submit (S)".

No.

Packed part names

Quantity

1

CD-ROM

1

2

Product key sheet (With Application Number)

1

1

2

AR-PK10  12 - 2

C. Turn off/on the power again.

D.  Visit the web page again, print the "PS Font List" at the "Printer Test 

Page" screen, check to confirm that the list is normally printed.

Note: Very important information is described below. Please keep this 

description in a safe place where it will not be lost. Uses this 
information in other model.

APPLICATION
NUMBER

MACHINE SERIAL
NUMBER

PRODUCT KEY

AR-SM5  13 - 1

A. Turn off the power switches of the main unit.

B. Remove two screws.

 

Push the 2 part to disengage the pawl, slide the rear cabinet and 
remove it.

C. If the FAX unit is installed, remove four screws to remove the FAX 

unit.

D. Insert the memory to the empty socket of the IMC2 PWB.

E. Install the FAX unit, and secure it with four screws.

F. Install the rear cabinet, and secure it with two screws.

No.

Packed part names

Quantity

1

256Mb expansion memory

1

1

 

No part of this publication may be reproduced,
stored in a retrieval system, or transmitted in
any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without
prior written permission of the publisher.

ALL RIGHTS RESERVED.

The PWB’s of this model employs lead-free solder. The “LF” marks indicated on the PWB’s and the Service Manual mean “Lead-Free” solder.

The alphabet following the LF mark shows the kind of lead-free solder.

When repairing a lead-free solder PWB, use lead-free solder thread.

Never use conventional lead solder thread, which may cause a breakdown or an accident.

Since the melting point of lead-free solder thread is about 40°C higher than that of conventional lead solder thread, the use of the
exclusive-use soldering iron is recommendable.

Since the melting point of lead-free solder is about 220°C, which is about 40°C higher than that of conventional lead solder, and its soldering
capacity is inferior to conventional one, it is apt to keep the soldering iron in contact with the PWB for longer time. This may cause land
separation or may exceed the heat-resistive temperature of components. Use enough care to separate the soldering iron from the PWB when
completion of soldering is confirmed.

Since lead-free solder includes a greater quantity of tin, the iron tip may corrode easily. Turn ON/OFF the soldering iron power frequently.

If different-kind solder remains on the soldering iron tip, it is melted together with lead-free solder. To avoid this, clean the soldering iron
tip after completion of soldering work.

If the soldering iron tip is discolored black during soldering work, clean and file the tip with steel wool or a fine filer.

5mm

Lead-Free

Solder composition
code (Refer to the
table at the right.)

Solder composition

Sn-Ag-Cu

Sn-Ag-Bi
Sn-Ag-Bi-Cu

Sn-Zn-Bi

Sn-In-Ag-Bi

Sn-Cu-Ni

Sn-Ag-Sb

Bi-Sn-Ag-P
Bi-Sn-Ag

a

b

z

i

n

s

p

Solder composition code

a