Sharp MX-FXX2 (serv.man2) Service Manual ▷ View online
MX-FXX2 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 6
* Items M are displayed as "Display item: Detail of display."
Example: EXECUTE MODE: AUTO
<Reflection to item M after settlement of the values>
When [EXECUTE] button is pressed after changing and settlement
of the exposure adjustment values A to L, the data are saved to
EEPROM and RAM and reflected to item M at the same time.
When [EXECUTE] button is pressed after changing and settlement
of the exposure adjustment values A to L, the data are saved to
EEPROM and RAM and reflected to item M at the same time.
46-44
Purpose
Adjustment
Function (Purpose) Used to execute the FAX exposure adjust-
ment (Ultra Fine).
Section
MFP/FAX
Item
Image quality
Operation/Procedure
1)
1)
Select the set item with [
↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
played in the setting area.
* If there is any item over [
↑], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↑], the display grays out and the
operation is invalid.
If there is any item under [
If there is any item under [
↓], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↓], the display grays out and the
operation is invalid.
2)
Enter the set value with 10-key.
* When [C] key is pressed, the entered value is cleared.
* When [C] key is pressed, the entered value is cleared.
3)
When [EXECUTE] button is pressed, it is highlighted and the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
↑], [↓], [OK] button, [COLOR], or [BLACK] key is
pressed, the data are saved to EEPROM and RAM.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] but-
ton is pressed during printing, the operation is interrupted.
<Set range and default value of each setup>
* Items M are displayed as "Display item: Detail of display."
Example: EXECUTE MODE: AUTO
<Reflection to item M after settlement of values>
When [EXECUTE] key is pressed after changing and settlement of
exposure adjustment values A to L, the data are saved to EEPROM
and RAM and set to item M at the same time.
When [EXECUTE] key is pressed after changing and settlement of
exposure adjustment values A to L, the data are saved to EEPROM
and RAM and set to item M at the same time.
46-45
Purpose
Adjustment
Function (Purpose) Used to execute the FAX exposure level
adjustment and the individual setting
(600DPI).
(600DPI).
Section
FAX
Item
Image quality
Operation/Procedure
1)
1)
Select the set item with [
↑] and [↓] buttons.
The highlighted set value is switched and the value is dis-
played in the setting area.
* If there is any item over [
played in the setting area.
* If there is any item over [
↑], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↑], the display grays out and the
operation is invalid.
0
A:
A : 50
; AUTO
B : 50
; EXPOSURE1
SIMULATION NO.46-43
EXPOSURE ADJUSTMENT(FAX : SUPER FINE)
50
[ 1~ 99]
OK
TEST
EXECUTE
CLOSE
C : 50
; EXPOSURE2
D : 50
; EXPOSURE3
Item
Display item & Detail of display
Content
Default value
Default value
Writing
A
AUTO
Ultra Fine/Auto
1 to 99
50
YES
B
EXPOSURE1
Ultra Fine/Exposure 1
1 to 99
50
YES
C
EXPOSURE2
Ultra Fine/Exposure 2
1 to 99
50
YES
D
EXPOSURE3
Ultra Fine/Exposure 3
1 to 99
50
YES
E
EXPOSURE4
Ultra Fine/Exposure 4
1 to 99
50
YES
F
EXPOSURE5
Ultra Fine/Exposure 5
1 to 99
50
YES
G
AUTO H_TONE
Ultra Fine/Auto/Half tone
1 to 99
50
YES
H
EXPOSURE1 H_TONE
Ultra Fine/Exposure 1/Half tone
1 to 99
50
YES
I
EXPOSURE2 H_TONE
Ultra Fine/Exposure 2/Half tone
1 to 99
50
YES
J
EXPOSURE3 H_TONE
Ultra Fine/Exposure 3/Half tone
1 to 99
50
YES
K
EXPOSURE4 H_TONE
Ultra Fine/Exposure 4/Half tone
1 to 99
50
YES
L
EXPOSURE5 H_TONE
Ultra Fine/Exposure 5/Half tone
1 to 99
50
YES
M
EXECUTE MODE
AUTO
Print mode
Ultra Fine/Auto
1 to 12
1
1 (AUTO)
NO
EXP1
Ultra Fine/Exposure 1
2
EXP2
Ultra Fine/Exposure 2
3
EXP3
Ultra Fine/Exposure 3
4
EXP4
Ultra Fine/Exposure 4
5
EXP5
Ultra Fine/Exposure 5
6
AUTO H_TONE
Ultra Fine/Auto/Half tone
7
EXP1 H_TONE
Ultra Fine/Exposure 1/Half tone
8
EXP2 H_TONE
Ultra Fine/Exposure 2/Half tone
9
EXP3 H_TONE
Ultra Fine/Exposure 3/Half tone
10
EXP4 H_TONE
Ultra Fine/Exposure 4/Half tone
11
EXP5 H_TONE
Ultra Fine/Exposure 5/Half tone
12
0
A:
A : 50
; AUTO
B : 50
; EXPOSURE1
SIMULATION NO.46-44
EXPOSURE ADJUSTMENT(FAX : ULTRA FINE)
50
[ 1~ 99]
OK
TEST
EXECUTE
CLOSE
C : 50
; EXPOSURE2
D : 50
; EXPOSURE3
MX-FXX2 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 7
If there is any item under [
↓], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↓], the display grays out and the
operation is invalid.
2)
Enter the set value with 10-key.
* When [C] key is pressed, the entered value is cleared.
* When [C] key is pressed, the entered value is cleared.
3)
When [EXECUTE] button is pressed, it is highlighted and the
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
current set value is saved to EEPROM and RAM. Printing for
the adjustment is started.
After completion of printing, [EXECUTE] button returns to the
normal display.
* When [
↑], [↓], [OK] button, [COLOR], or [BLACK] key is pressed,
the data are saved to EEPROM and RAM.
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] button
* When [C], [CA], [SYSTEM SETTINGS], or [EXECUTE] button
is pressed during printing, the operation is interrupted.
<Set range and default value of each setup>
* Items M are displayed as "Display item: Detail of display."
Example: EXECUTE MODE: AUTO
50
50-27
Purpose
Adjustment
Function (Purpose) Used to adjust the image loss of scanned
image in the FAX/Scanner mode.
Section
FAX/Scanner
Item
Image quality
Operation/Procedure
1)
1)
Use [FAX] button and [SCANNER] button to select the mode.
2)
Select the set item with [
↑] and [↓] buttons.
The highlighted section of the set value is switched and dis-
played on the set setting area.
* If there is any item over [
played on the set setting area.
* If there is any item over [
↑], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↑], the display grays out and the
operation is invalid.
If there is any item under [
If there is any item under [
↓], an active display is made and
item is shifted.
If there is no item over [
If there is no item over [
↓], the display grays out and the
operation is invalid.
3)
Enter the set value with 10-key.
* Press [C] key to clear the entered values.
* Press [C] key to clear the entered values.
4)
When [OK] button is pressed, the current entered value is
saved to EEPROM and RAM.
* When [
saved to EEPROM and RAM.
* When [
↑], [↓] button, [COLOR], or [BLACK] key is pressed,
the data are saved to EEPROM and RAM.
* When [CLOSE] button is pressed, the display is shifted to the
copy basic screen of simulation.
* Copying can be performed also by pressing [COLOR]/[BLACK]
key.
Item
Display item & Detail of display
Content
Set range
Default value
Writing
A
AUTO
600dpi/Auto
1 to 99
50
YES
B
EXPOSURE1
600dpi/Exposure 1
1 to 99
50
YES
C
EXPOSURE2
600dpi/Exposure 2
1 to 99
50
YES
D
EXPOSURE3
600dpi/Exposure 3
1 to 99
50
YES
E
EXPOSURE4
600dpi/Exposure 4
1 to 99
50
YES
F
EXPOSURE5
600dpi/Exposure 5
1 to 99
50
YES
G
AUTO H_TONE
600dpi/Auto/Half tone
1 to 99
50
YES
H
EXPOSURE1 H_TONE
600dpi/Exposure 1/Half tone
1 to 99
50
YES
I
EXPOSURE2 H_TONE
600dpi/Exposure 2/Half tone
1 to 99
50
YES
J
EXPOSURE3 H_TONE
600dpi/Exposure 3/Half tone
1 to 99
50
YES
K
EXPOSURE4 H_TONE
600dpi/Exposure 4/Half tone
1 to 99
50
YES
L
EXPOSURE5 H_TONE
600dpi/Exposure 5/Half tone
1 to 99
50
YES
M
EXECUTE MODE
AUTO
Print mode
600dpi/Auto
1 to 12
1
1 (AUTO)
NO
EXP1
600dpi/Exposure 1
2
EXP2
600dpi/Exposure 2
3
EXP3
600dpi/Exposure 3
4
EXP4
600dpi/Exposure 4
5
EXP5
600dpi/Exposure 5
6
AUTO H_TONE
600dpi/Auto/Half tone
7
EXP1 H_TONE
600dpi/Exposure 1/Half tone
8
EXP2 H_TONE
600dpi/Exposure 2/Half tone
9
EXP3 H_TONE
600dpi/Exposure 3/Half tone
10
EXP4 H_TONE
600dpi/Exposure 4/Half tone
11
EXP5 H_TONE
600dpi/Exposure 5/Half tone
12
0
A:
A㧦 50
㧧
AUTO
B㧦 50
㧧
EXPOSURE1
SIMULATION NO.46-45
EXPOSURE ADJUSTMENT(FAX㧦600DPI)
50
㨇
1㨪 99㨉
OK
TEST
EXECUTE
CLOSE
C㧦 50
㧧
EXPOSURE2
D㧦 50
㧧
EXPOSURE3
MX-FXX2 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 8
<Set range and default value of each setup>
* A to I: The greater the adjustment value is, the greater the image
loss is. 1step=0.1mm
66
66-1
Purpose
Setting
Function (Purpose) Used to display the FAX-related soft SW (2
- 99) on the LCD to allow changing the soft
SW while checking with the LCD.
SW while checking with the LCD.
Section
FAX
Item
Setting
Operation/Procedure
1)
1)
Enter the [SW NO] with 10-key.
* When [C] key is pressed, the entered value of [SW NO] is
* When [C] key is pressed, the entered value of [SW NO] is
cleared.
2)
Press [DATA] button.
The soft SW data entered in procedure 1) is displayed.
* When [SW NO] button is pressed, the display returns to the
The soft SW data entered in procedure 1) is displayed.
* When [SW NO] button is pressed, the display returns to the
initial screen.
3)
Enter the number corresponding to the bit to be changed with
10-key.
[1]
10-key.
[1]
→ [0]
[0]
→ [1]
* When [SW NO] button is pressed, the display returns to the
initial screen.
4)
When [EXECUTE] button is pressed, it is highlighted and the
setting is saved.
After saving the setting, [EXECUTE] button returns to the nor-
mal display.
setting is saved.
After saving the setting, [EXECUTE] button returns to the nor-
mal display.
* When [CA] key is pressed, the simulation is terminated.
* When [SYSTEM SETTINGS] key is pressed, the display returns
* When [SYSTEM SETTINGS] key is pressed, the display returns
to the sub number entry screen.
66-2
Purpose
Setting
Function (Purpose) Used to enter a country code and set the
default value for the country code.
Section
FAX
Item
Setting
Operation/Procedure
1)
1)
When the machine enters Simulation 66-02, the following
screen is displayed.
* When [DEST CODE] button is pressed, the display is shifted
screen is displayed.
* When [DEST CODE] button is pressed, the display is shifted
to the country code list screen.
* The country code shift screen is shown on the next page.
* The currently set country code is displayed in the column of
* The currently set country code is displayed in the column of
"PRESENT:".
2)
Enter the country code (8 digits) with 10-key([0]/[1]). The
entered country code is displayed in the column of "NEW:" and
[SET] key becomes active.
* When [C] key is pressed, the column of “NEW:” is cleared.
entered country code is displayed in the column of "NEW:" and
[SET] key becomes active.
* When [C] key is pressed, the column of “NEW:” is cleared.
3)
When [SET] button is pressed after entering the country code,
[EXECUTE] button becomes active. The country code is dis-
played in the column of "PRESENT:", and the column of
"NEW:" is cleared.
* When [C] key is pressed, the display returns to the initial set-
[EXECUTE] button becomes active. The country code is dis-
played in the column of "PRESENT:", and the column of
"NEW:" is cleared.
* When [C] key is pressed, the display returns to the initial set-
ting screen.
4)
When [EXECUTE] button is pressed, it is highlighted and
[YES] and [NO] buttons become active. The country name is
displayed on the tile line.
* When [NO] button is pressed, [EXECUTE] button returns to
[YES] and [NO] buttons become active. The country name is
displayed on the tile line.
* When [NO] button is pressed, [EXECUTE] button returns to
the normal display and [YES] and [NO] buttons become
inactive.
inactive.
5)
When [YES] button is pressed, it is highlighted and the soft SW
corresponding to the country code is initialized.
* During clearing the FAX-related soft SW, [EXECUTE] and
corresponding to the country code is initialized.
* During clearing the FAX-related soft SW, [EXECUTE] and
[YES] buttons are highlighted.
Item
Display item
Description
Set range
Default value
FAX send
A
Image loss
setting OC
setting OC
LEAD_EDGE (OC)
OC lead edge image loss setting
0 to 100
30 (3mm)
B
FRONT_REAR (OC)
OC side image loss setting
0 to 100
20 (2mm)
C
TRAIL_EDGE (OC)
OC rear edge image loss setting
0 to 100
20 (2mm)
D
Image loss
setting SPF
SIDE1
setting SPF
SIDE1
LEAD_EDGE (SPF_SIDE1)
Front surface lead edge image loss setting
0 to 100
20 (2mm)
E
FRONT_REAR (SPF_SIDE1)
Front surface side image loss setting
0 to 100
20 (2mm)
F
TRAIL_EDGE (SPF_SIDE1)
Front surface rear edge image loss setting
0 to 100
30 (3mm)
G
Image loss
setting SPF
SIDE2
setting SPF
SIDE2
LEAD_EDGE (SPF_SIDE2)
Back surface lead edge image loss setting
0 to 100
20 (2mm)
H
FRONT_REAR (SPF_SIDE2)
Back surface side image loss setting
0 to 100
20 (2mm)
I
TRAIL_EDGE (SPF_SIDE2)
Back surface rear edge image loss setting
0 to 100
30 (3mm)
SCANNER
mode (FAX,
other than
COPY)
mode (FAX,
other than
COPY)
A
Image loss
setting OC
setting OC
LEAD_EDGE(OC)
OC lead edge image loss setting
0 to 100
0 (0mm)
B
FRONT_REAR(OC)
OC side image loss setting
0 to 100
0 (0mm)
C
TRAIL_EDGE(OC)
OC rear edge image loss setting
0 to 100
0 (0mm)
D
Image loss
setting SPF
SIDE1
setting SPF
SIDE1
LEAD_EDGE(SPF_SIDE1)
Front surface lead edge image loss setting
0 to 100
0 (0mm)
E
FRONT_REAR(SPF_SIDE1)
Front surface side image loss setting
0 to 100
0 (0mm)
F
TRAIL_EDGE(SPF_SIDE1)
Front surface rear edge image loss setting
0 to 100
0 (0mm)
G
Image loss
setting
SPFSIDE2
setting
SPFSIDE2
LEAD_EDGE(SPF_SIDE2)
Back surface lead edge image loss setting
0 to 100
0 (0mm)
H
FRONT_REAR(SPF_SIDE2)
Back surface side image loss setting
0 to 100
0 (0mm)
I
TRAIL_EDGE(SPF_SIDE2)
Back surface rear edge image loss setting
0 to 100
0 (0mm)
CLOSE
0
A:
SIMULATION NO.50㧙27
SCANNER/FAX-SEND ALL EDGE ADJUSTMENT VALUE
30
㨇
0㨪 100 㨉
OK
TEST
FAX
SCANNER
A㧦 30
㧧
LEAD_EDGE(OC)
B㧦 20
㧧
FRONT_REAR(OC)
C㧦 20
㧧
TRAIL_EDGE(OC)
D㧦 30
㧧
LEAD_EDGE(SPF_SIDE1)
SIMULATION NO.66-01
CLOSE
TEST
FAX SOFT SW.SETTING
0
EXECUTE
SW No.
DATA
:
:
(SW No.2-99)
1 2 3 4 5 6 7 8
MX-FXX2 SIMULATIONS, FAX SOFTWARE SWITCH 5 – 9
6)
After completion of initialization of the soft SW, [EXECUTE],
[YES], and [NO] buttons become inactive.
* When [CA] key is pressed after completion of initialization of
[YES], and [NO] buttons become inactive.
* When [CA] key is pressed after completion of initialization of
the soft SW, the whole machine is reset.
Operation/Procedure (Shifting to the country page)
* When [DEST CODE] button is pressed on the initial screen, the
* When [DEST CODE] button is pressed on the initial screen, the
display is shifted to the country code list screen.
Use [
Use [
↑] [↓] buttons to select the country select page.
When the table item is the top (last)item, [
↑] [↓] buttons gray out.
When [
↑] [↓] buttons gray out, they are disabled.
* Press [BACK] button to return to the entry screen.
<Country code list>
Initial screen
Country code list screen
66-3
Purpose
Operation test/Check
Function (Purpose) Used to execute the read/write check of
EEPROM on the MODEM controller,
SDRAM, SRAM on the MFP controller, and
flash ROM, and to display the results.
SDRAM, SRAM on the MFP controller, and
flash ROM, and to display the results.
Section
FAX
Item
Operation
Operation/Procedure
1)
1)
When the machine enters Simulation 66-03, the following
screen is displayed.
* Use [
screen is displayed.
* Use [
↑] [↓] buttons to select the country select page. (The
highlighted section of the set value is switched and dis-
played on the set setting area.)
When [
played on the set setting area.)
When [
↑] [↓] buttons gray out, they are disabled.
2)
When the memory check item button is selected, the display is
shifted to the memory check screen.
* Only one memory check item can be selected.
shifted to the memory check screen.
* Only one memory check item can be selected.
3)
When [EXECUTE] button is pressed, it is highlighted and the
memory check of the selected item is started.
* When [EXECUTE] button is pressed again during memory
memory check of the selected item is started.
* When [EXECUTE] button is pressed again during memory
check, the operation is interrupted. (The display shows the
status immediately before pressing [EXECUTE] button.)
When [EXECUTE] button is pressed after interrupting the
operation, memory check is resumed.
status immediately before pressing [EXECUTE] button.)
When [EXECUTE] button is pressed after interrupting the
operation, memory check is resumed.
4)
After completion of memory check, [EXECUTE] button returns
to the normal display and the result of memory check is dis-
played.
* For the memory which is not installed, [NO CHECK] is dis-
to the normal display and the result of memory check is dis-
played.
* For the memory which is not installed, [NO CHECK] is dis-
played.
* When [CA] key is pressed, the simulation is terminated.
* When [SYSTEM SETTINGS] key is pressed, the display
* When [SYSTEM SETTINGS] key is pressed, the display
returns to the sub number entry screen.
* In the case of [REPEAT] check, the following display is made for
every execution.
CHECKING 0001
CHECKING 0002
CHECKING 0003
:
:
The number of times is displayed in 4-digit decimal numbers.
When the number exceeds 9999, it becomes 0000
Check is repeated until [EXECUTE] is pressed or [NG] occurs.
CHECKING 0001
CHECKING 0002
CHECKING 0003
:
:
The number of times is displayed in 4-digit decimal numbers.
When the number exceeds 9999, it becomes 0000
Check is repeated until [EXECUTE] is pressed or [NG] occurs.
Memory check status
JAPAN
00000000
U.S.A.
10110101
AUSTRALIA
00001001
U.K.
10110100
FRANCE
00111101
GERMANY
00000100
SWEDEN
10100101
NEWZEALAND
01111110
CHINA
00100110
SINGAPORE
10011100
TW
11111110
MIDDLEANDNEAREAST
11111101
SLOVAKIA
11111100
OTHER3
11111011
FINLAND
00111100
NORWAY
10000010
DENMARK
00110001
NETHERLANDS
01111011
ITALY
01011001
SWITZERLAND
10100110
AUSTRIA
00001010
INDONESIA
01010100
THAILAND
10101001
MALAYSIA
01101100
INDIA
01010011
PHILIPPINES
10001001
HONGKONG
01010000
RUSSIA
10111000
SOUTHAFRICA
10011111
SPAIN
10100000
PORTUGUESE
10001011
LUXEMBURG
01101001
BELGIUM
00001111
CZECH
00101110
HUNGARY
01010001
GREECE
01000110
POLAND
10001010
BRAZIL
00010110
SIMULATION NO.66-02
CLOSE
TEST
FAX SOFT SW.CLEAR-JAPAN
0
PRESENT :
NEW:
00000000
SET
DEST CODE
ARE YOU SURE?
YES
NO
EXECUTE
NO CHECK
No check
CHECKING
During checking
OK
Check complete OK
NG A##
Check complete NG
Error occurring address or data
line is displayed for each item.
line is displayed for each item.
SIMULATION• NO.66-02
CLOSE
TEST
FAX SOFT SW.CLEAR
1/2
0
BACK
JAPAN
:
00000000
U.S.A
:
10110101
AUSTRALIA
:
00001001
U.K
:
10110100
FRANCE
:
00111101
GERMANY
:
00000100
SWEDEN
:
10100101
NEWZEALAND
:
01111110
CHINA
:
00100110
SINGAPORE
:
10011100
TW
:
11111110
MIDDLEANDNEAREAS :
11111101
SLOVAKIA
:
11111100
OTHER3
:
11111011
FINLAND
:
00111100
NORWAY
:
10000010
DENMARK
:
00110001
NETHERLANDS
:
01111011
ITALY
:
01011001
SWITZERAND
:
10100110
AUSTRIA
:
00001010
INDONESIA
:
01010100
THAILAND
:
10101001
MALAYSIA
:
01101100
Click on the first or last page to see other MX-FXX2 (serv.man2) service manuals if exist.