Sharp MX-B201D (serv.man9) Service Manual ▷ View online
MX-B201/B201D SIMULATION, TROUBLE CODES 10 - 18
43
01
Fusing temperature setting
(Normal copy)
(Normal copy)
[Function]
Used to set the fusing temperature of 3rd or later sheet. (For 1st and 2nd sheets, SIM 43-14 is
used.)
Used to set the fusing temperature of 3rd or later sheet. (For 1st and 2nd sheets, SIM 43-14 is
used.)
When this simulation is executed, the current set code number is displayed. Press [Numeric]
key to change the setting and press [ENTER]/[START] key to save the setting into the EER-
POM. The machine goes into the sub code entry standby mode.
key to change the setting and press [ENTER]/[START] key to save the setting into the EER-
POM. The machine goes into the sub code entry standby mode.
The [
] [
] key is used to select the mode.
[Operation]
04
Fusing temperature setting
in multi copy
in multi copy
[Function]
For 20th sheet or later in multi copy, the fusing temperature is automatically changed from the
temperature set with simulation 43-01 to the temperature set with this simulation.
For 20th sheet or later in multi copy, the fusing temperature is automatically changed from the
temperature set with simulation 43-01 to the temperature set with this simulation.
When this simulation is executed, the current set code number is displayed. Enter the code
number and press [ENTER]/[START] key to change the setting.
number and press [ENTER]/[START] key to change the setting.
∗ The cassette feed and the manual feed are controlled similarly.
[Operation]
The operation is similar to simulation 43-01.
The operation is similar to simulation 43-01.
Main
code
code
Sub
code
Contents
Details of function/operation
* The cassette feed and the manual feed are controlled similarly.
Code
Set temperature (°C)
Remark
Code
Set temperature (°C)
Remark
0
170
5
195
Default
1
175
6
200
2
180
7
205
3
185
8
210
4
190
Mode
Display item
Main cassette paper feed
TRAY1
Manual paper feed
MFT
1) Initial display <Main cassette paper feed
setting>
2) [
] [
] key: Mode selection
3) [Numeric] key: Value entry
4) [ENTER]/[START] key
Settles the entered value. The display is
shifted to the sub code input standby
menu.
shifted to the sub code input standby
menu.
43-01 FU TEMP
TRAY1 6( 0-8 )
43-01 FU TEMP
MFT 6( 0-8 )
43-01 FU TEMP
MFT 6( 0-8 )
Code
Set temperature (°C)
Remark
0
165
1
170
2
175
3
180
4
185
5
190
6
195
7
200
Mode
Display item
Default
Main cassette paper feed
TRAY1
3
Manual paper feed
MFT
3
Main cassette paper feed (small-size)
TRAY1 SH
1
Manual paper feed (small-size)
MFT SH
1
MX-B201/B201D SIMULATION, TROUBLE CODES 10 - 19
:'11/Oct/17
1
43
05
Fusing temperature setup in
duplex copy
(MX-B201D only)
duplex copy
(MX-B201D only)
[Function]
In the case of duplex copy, the shift temperature set with this simulation is applied to the fusing
temperature.
When this simulation is executed, the current set code number is displayed.
Enter the desired code number and press [ENTER]/[START] key to save the setting.
In the case of duplex copy, the shift temperature set with this simulation is applied to the fusing
temperature.
When this simulation is executed, the current set code number is displayed.
Enter the desired code number and press [ENTER]/[START] key to save the setting.
[Operation]
The operation is similar to simulation 26-02.
The operation is similar to simulation 26-02.
14
Fusing start temperature
setting
setting
[Function]
When this simulation is started, the currently set code number is displayed.
Press [Numeric] key or [
When this simulation is started, the currently set code number is displayed.
Press [Numeric] key or [
] [
] key to switch the setting, and press [ENTER]/[START] key to
save it to the EEPROM. The machine goes to the sub code entry standby mode.
[Operation]
The operation is similar to simulation 43-01.
The operation is similar to simulation 43-01.
Main
code
code
Sub
code
Contents
Details of function/operation
1
Code
Shift temperature (°C)
Remark
0
±0
Default
1
–8
2
–6
3
–4
4
–2
5
±0
6
+2
7
+4
8
+6
9
+8
Code
Set temperature (°C)
Remark
0
160
1
165
2
170
3
175
4
180
5
185
6
190
7
195
Default
8
200
9
205
10
210
MX-B201/B201D SIMULATION, TROUBLE CODES 10 - 20
46
01
Copy density adjustment
(300dpi)
(300dpi)
[Function]
Copy density is set for each mode.
When this simulation is executed, the current se value is displayed in 2 digits (Default: 50).
Change the set value and press [START] key to make a copy under the set value.
When the set value is increased, the copy becomes darker. When the set value is decreased,
the copy becomes lighter.
In this case, only Exp.3 copy is made. When, however, the setting is made to make darker copy,
Exp.1 and Exp.5 copies also become darker. When made to lighter copy, Exp1. and Exp.5 cop-
ies become lighter, too.
Press [
Copy density is set for each mode.
When this simulation is executed, the current se value is displayed in 2 digits (Default: 50).
Change the set value and press [START] key to make a copy under the set value.
When the set value is increased, the copy becomes darker. When the set value is decreased,
the copy becomes lighter.
In this case, only Exp.3 copy is made. When, however, the setting is made to make darker copy,
Exp.1 and Exp.5 copies also become darker. When made to lighter copy, Exp1. and Exp.5 cop-
ies become lighter, too.
Press [
] [
] key to switch the mode. The set value of the selected mode is displayed on
the LCD/display. (Adjustment value: 1 – 99)
The setting procedure of the magnification ratio is the same as that to copy operation.
The setting procedure of the magnification ratio is the same as that to copy operation.
[Operation]
Main
code
code
Sub
code
Contents
Details of function/operation
Mode
Display item
LED
Default
AE mode (300dpi)
AE
COPY mode lamp
50
TEXT mode (300dpi)
TEXT
PRINT mode lamp
50
PHOTO mode
PHOTO
SCAN mode lamp
50
TS mode (TEXT) (300dpi)
TSTXT
PRINT mode lamp
SCAN mode lamp
SCAN mode lamp
50
TS mode (AE) (300dpi)
TSAE
COPY mode lamp
SCAN mode lamp
SCAN mode lamp
50
Dither mode
D_PHO
COPY mode lamp
PRINT mode lamp
SCAN mode lamp
PRINT mode lamp
SCAN mode lamp
50
1) Initial display
2) [
] key: Mode selection
2) [
] key: Mode selection
3) [Numeric] key: Value entry
4) [START] key: Fixing and printing value
(No change on the LCD)
* Print is started in the set mode.
4) To fix the set value without printing, press
[ENTER] key.
* To cancel manual feed paper empty MSG,
press any key.
* When performing the AE mode exposure
adjustment, place the test chart on the docu-
ment table so that the center area of 10cm is
not covered.
ment table so that the center area of 10cm is
not covered.
46-01 EXP.LEVEL 300
AE 100% 50( 1-99)
46-01 EXP.LEVEL 300
TSAE 100% 50( 1-99)
46-01 EXP.LEVEL 300
TEXT 100% 50( 1-99)
46-01 EXP.LEVEL 300
AE 100% 62( 1-99)
46-01 EXP.LEVEL 300
AE 100% 62( 1-99)
46-01 EXP.LEVEL 300
AE 100% 62( 1-99)
MX-B201/B201D SIMULATION, TROUBLE CODES 10 - 21
:'11/Oct/17
1
46
02
Copy density adjustment
(600dpi)
(600dpi)
[Function]
Copy density is set for each mode.
When this simulation is executed, the current se value is displayed in 2 digits (Default: 50).
Change the set value and press [START] key to make a copy under the set value.
When the set value is increased, the copy becomes darker. When the set value is decreased,
the copy becomes lighter.
In this case, only Exp.3 copy is made. When, however, the setting is made to make darker copy,
Exp.1 and Exp.5 copies also become darker. When made to lighter copy, Exp1. and Exp.5 cop-
ies become lighter, too.
Press [
Copy density is set for each mode.
When this simulation is executed, the current se value is displayed in 2 digits (Default: 50).
Change the set value and press [START] key to make a copy under the set value.
When the set value is increased, the copy becomes darker. When the set value is decreased,
the copy becomes lighter.
In this case, only Exp.3 copy is made. When, however, the setting is made to make darker copy,
Exp.1 and Exp.5 copies also become darker. When made to lighter copy, Exp1. and Exp.5 cop-
ies become lighter, too.
Press [
] [
] key to switch the mode. The set value of the selected mode is displayed on
the LCD/display. (Adjustment value: 1 – 99)
[Operation]
The operation is similar to simulation 46-01.
The operation is similar to simulation 46-01.
12
Density adjustment in the
FAX mode (Collective
adjustment)
(When MX-FX12 is installed)
FAX mode (Collective
adjustment)
(When MX-FX12 is installed)
[Function]
When [START] key is pressed, scan is executed with the entered exposure adjustment value
and the data stored on the FAX side is rewritten into the entered value.
When [START] key is pressed, scan is executed with the entered exposure adjustment value
and the data stored on the FAX side is rewritten into the entered value.
All data of the exposure adjustment values are rewritten into the same value.
For the density adjustment table data, refer to SIM46-13 (density adjustment (Normal text) in
the FAX mode).
the FAX mode).
[Operation]
Main
code
code
Sub
code
Contents
Details of function/operation
Mode
Display item
LED
Default
AE mode (600dpi)
AE
COPY mode lamp
50
TEXT mode (600dpi)
TEXT
PRINT mode lamp
50
PHOTO mode
PHOTO
SCAN mode lamp
50
TS mode (TEXT) (600dpi)
TSTXT
PRINT mode lamp
SCAN mode lamp
SCAN mode lamp
50
TS mode (AE) (600dpi)
TSAE
COPY mode lamp
SCAN mode lamp
SCAN mode lamp
50
Dither mode
D_PHO
COPY mode lamp
PRINT mode lamp
SCAN mode lamp
PRINT mode lamp
SCAN mode lamp
50
1
1) Initial display
("XX" is the exposure adjustment value of
normal text stored on the FAX side.)
normal text stored on the FAX side.)
2) Enter a 2-digit value as the exposure
adjustment value with [Numeric] key.
("YY" is the entered exposure adjustment
value.)
value.)
3) Scan is started (self print), and the LED
of [START] key is turned off.
4) Print is started (self print).
After completion of printing, returns to “2)”
display.
display.
ADJUST EXP. AUTO
XX
ADJUST EXP. AUTO
YY
ADJUST EXP. AUTO
SCAN YY
ADJUST EXP. AUTO
PRINT YY
Click on the first or last page to see other MX-B201D (serv.man9) service manuals if exist.