DOWNLOAD Sharp MX-B201D (serv.man9) Service Manual ↓ Size: 16.14 MB | Pages: 127 in PDF or view online for FREE

MX-B201/B201D   MAINTENANCE  11 - 1

: Check (Clean, adjust, or replace when required.)

: Clean

: Replace

: Adjust

✩

: Lubricate

Note: When developer is replaced, be sure to execute simulation No. 24-06 to reset the counter.

• The remaining toner indication is based on the number of revolutions of the toner motor.

• The toner END indication appears when the END is detected by the toner sensor.

• The remaining toner indication is a rough indication of the remaining toner quantity.

Section

Parts

25K

50K

75K

100K

125K

Remark

Developing

Developer

DV blade

DV side seal (F/R)
DV doctor

White streaks are made on the 
image.

Process peripheral

Drum

Toner

Life

8K

Remaining quantity

NEAR EMPTY
About 12.5%

EMPTY

LED

ON

Flash

Machine

Operation allowed

Stop

Developer

Life

25K

LED

ON at 25K of the developer count.

Machine

Selection is available between Not Stop and Stop by Service Simulation (SIM 26-37) Setup.
(If Stop is selected, the LED will flash and stop at 25K.)
∗ Default: Not Stop
∗ Clear: SIM 24-06

Maintenance

LED

Selection is available among 25K, 13K, 9K, 6K, 3K, and free (no lighting) with SIM 21-1.
∗ Default: 25K
∗ Clear: SIM 20-1

Machine

Not stop.

TONER FULL

Remaining toner indication

Display for users

100%

75%

50%

25%

Lo

100-76%

75-51%

50-26%

25-13%

12.5% or less

MX-B201/B201D  USER PROGRAM  12 - 1

The user settings allow you to customize machine settings to better meet your needs.

The user settings consist of the following items.
To change the user program settings as explained in "SELECTING A SETTING FOR A USER PROGRAM".

Program 

number

Program name

Setting codes 

(factory default setting 

appears in bold)

Explanation

1

AUTO CLEAR

1: 10 SEC.
2: 30 SEC.
3: 60 SEC.
4: 90 SEC.
5: 120 SEC.
6: OFF

• Auto clear time automatically returns the copy settings to the initial set-

tings if no keys are pressed for a preset period of time following the end of
a copy job. 

• This program is used to select the period of time. Auto clear time can also

be disabled.

2

PREHEAT MODE

1: 30 SEC.
2: 1 MIN.
3: 5 MIN.
4: 30 MIN.
5: 60 MIN.
6: 120 MIN.
7: 240 MIN.

• This function automatically switches the machine to a low power con-

sumption state if the set duration of time elapses without the machine
being used when the power is on. The power save indicator lights up,
however, the keys on the operation panel can be used. Normal operation
automatically resumes when a key on the operation panel is pressed, an
original is placed, a print job is received.

3

AUTO  SHUT-OFF

1: ON 
2: OFF

• Use this setting to enable or disable auto power shut-off mode.

4

AUTO SHUT-OFF TIME

1: 5 MIN.
2: 30 MIN.
3: 60 MIN.
4: 120 MIN.
5: 240 MIN.

• This function automatically switches the machine to a state that consumes

even less power than preheat mode if the set duration of time elapses
without the machine being used when the power is on. All lights except
the power save indicator go off. To resume normal operation, press the
[START] key (

). Normal operation also resumes automatically when a

print job is received or scanning is begun from a computer. While in auto
power shut-off mode, no keys (except the [START] key (

)) can be

used.

7

LAYOUT IN 2IN1

1: PATTERN 1 
2: PATTERN 2

• Use this setting to select the layout pattern when two original pages are

copied onto a single sheet of paper.

8

OFFSET FUNCTION

1: ON 
2: OFF

• When enabled, this function offsets the position in the paper output tray of

sets of copies during copy job, and print jobs when using the printer func-
tion.

9

ROTATE ORIG.IMAGE

1: ON 
2: OFF

• When two-sided copying is performed, this function rotates the image on

the back of the original. This is convenient when binding the copies at the
top (tablet binding).

10

AE/TEXT 
RESOLUTION

1: 300dpi 
2: 600dpi

• This setting is used to change the copy resolution in AUTO and TEXT

mode from 600 x 300 dpi to 600 x 600 dpi (highquality mode). Scanning is
slower when high-quality mode is used.

11

2-SIDED COPY MODE

1: HI-SPEED 
2: NORMAL

• If the memory fills up when two-sided copying is performed, "NORMAL"

can be selected to make copying possible. However, "NORMAL" results in
a slower copying speed. Normally "HISPEED" is selected to enable fast
two-sided copying.

12

MARGIN WIDTH

1: 5 mm 
2: 10 mm 
3: 15 mm 
4: 20 mm

• Use this setting to set the margin width.

13

MEM. FOR PRINTER

1: 30% 
2: 40% 
3: 50% 
4: 60% 
5: 70%

• Use this to change the proportion of machine memory used for printer

mode.

14

AUTO KEY REPEAT

1: ON 
2: OFF

• Use this setting to select whether or not holding down a key causes

repeated input of the key. For keys that normally cause a set value to
increase when held down (for example, holding down the [

] key (

)

or [

] key (

)), this program can be used to have the set value not

change when the key is held down.

15

KEY PRESS TIME

1: NORMAL 
2: 0.5 SEC. 
3: 1.0 SEC. 
4: 1.5 SEC. 
5: 2.0 SEC.

• Use this setting to select how long a key must be pressed for the input to

be accepted. By selecting a longer time, you can prevent settings from
being changed by the accidental pressing of a key.

MX-B201/B201D  USER PROGRAM  12 - 2

16

KEY TOUCH SOUND

1: LOW 
2: HIGH 
3: OFF

• This sets the volume of beep signals.

17

SOUND AT DEFAULT

1: ON 
2: OFF

• Use this to sound a beep when a base setting is selected.

18

TONER SAVE MODE

1: ON 
2: OFF

• This mode reduces toner usage by about 10% when copying. Toner save

mode is effective when the exposure mode is AUTO or TEXT.

19

AE LEVEL ADJUST

1: SPF/RSPF 

(Adjustment to 5 
levels is possible) 

2: DOCUMENT GLASS 

(Adjustment to 5 
levels is possible)

• This is used to adjust the exposure level. 

• The automatic exposure level can be adjusted separately for the docu-

ment glass and the RSPF. 

• The factory default setting for the exposure level is "center".

20

LANGUAGE

2: ENGLISH 
3: FRENCH 
4: SPANISH 
5: GERMAN
6. ------ 
: 
18: Brazilian portuguese

This is used to set the language used in the display. 
18 Languages can be selected.

21

RESET FACTORY

1: Yes 
2: No 

This is used to return all settings to the factory default settings.

22

SORT AUTO SELECT

1: ON 
2: OFF

Use this setting to enable or disable sort auto select mode.

24

• CHECK OC OPEN
• CHECK RSPF OPEN 

(When an RSPF is 
installed)

1: ON 
2: OFF

• You can set the operation that takes place if the [START] key (

) is

pressed when the original cover/RSPF is not completely closed.

25

VALID COPY WIDTH

2: SMALL 

(INVOICE/B5R WIDTH)

• Set the allowed paper sizes for copying from the bypass tray. When

"SMALL" is selected, a copy of an A4 (letter) size original will only be
printed up to B5R (invoice) size.

28

LSU SETTING

1: ON 
2: OFF

• Select whether copying is only allowed when the polygon motor is rotat-

ing, or also when the polygon motor is stopped.

29

PAPER TYPE

1: PLAIN PAPER 
2: HEAVY PAPER

• Set the temperature of the fusing unit when the bypass tray is used. Nor-

mally "PLAIN PAPER" should be selected.

30

DISPLAY CONTRAST

1: LIGHTER 
2: LIGHT 
3: NORMAL 
4: DARK 
5: DARKER

• Set the contrast of the display.

31

Date&Time Set

• This function is enabled when  MX-NB11(Network Expansion Kit) is installed.

32

Date&Time Format

1: Time Format 
(selectable in 2 kinds)
2: Date Format 
(selectable in 3 kinds)

• This function is enabled when  MX-NB11(Network Expansion Kit) is installed.

Program 

number

Program name

Setting codes 

(factory default setting 

appears in bold)

Explanation

MX-B201/B201D  USER PROGRAM  12 - 3

：'11/Oct/17

*1: The scanning speed increases when the USB 2.0 mode is set to "HI-SPEED", however, the printing speed does not increase considerably.

*2: When the 250-sheet paper feed unit is installed.

*3: When the Network expansion kit is installed.

Program 

number

Program name

Setting codes 

(factory default setting 

appears in bold)

Explanation

1

FORCED OUTPUT

1: ON 
2: OFF

When this function is enabled, printing in printer mode will automatically 
continue using a different size of paper if the specified size of paper runs out 
in all trays. This feature does not function in copy mode.

2

USB 2.0 MODE 
SWITCH *1

1: FULL-SPEED 
2: HI-SPEED

This sets the USB 2.0 data transfer speed. To obtain the fastest speed when 
using the USB 2.0 connector, first verify that your computer meets the 
system requirements (operating system and driver), and then use this 
program to change the USB 2.0 mode to "Hi-Speed". Note that the setting 
should not be changed while running a TWAIN driver.

3

AUTO TRAY SWITCH*2

1: ON 
2: OFF

This is selectable when the optional paper tray is installed. 
(This is not shown when the optional tray is not installed.)

4

ENABLE TCP/IP *3

1: ON 
2: OFF

This is to select whether or not to make the network connection by TCP/IP 
protocol effective.

5

ENABLE DHCP *3

1: ON 
2: OFF

This is to select whether or not to apply to DHCP network connection.

6

IP ADDRESS SETTING 
*3

1: IP ADDRESS 
2: SUBNETMASK 
3: DEFAULT GATEWAY

This is to set IP address, Subnetmask and Default Gateway from the 
machine. This can also be used to check the machine’s IP ADDRESS when 
"IP ADDRESS" is selected. When the program number 4 "ENABLE DHCP" 
is "ON" and the machine is under DHCP environment, the IP address on the 
display is shown with "

" at the tail end.

Program 

number 

Program name 

Setting codes 

(factory default setting 

appears in bold) 

Explanation 

1

DOC. GLASS SIZE 

1: 8.5x11
2: 8.5x14
3: A4 

• Set the size of an original faxed from the document glass. 

2

FIXED DOC. SIZE 

1: 8.5x11
2: 8.5x14
3: A4 

• Set the default size of originals faxed from the document glass. 

3

RESO. PRIORITY 

1: STANDARD 
2: FINE 
3: SUPER FINE 

• Set the default resolution for fax transmission. 

4

# OF RINGS (AUTO) 

0 - 9 (2) 

• Set the number of rings on which the machine answers calls in automatic

reception mode. 

5

# OF RINGS (MANUAL) 

0 - 9 (0) 

• Set the number of rings on which the machine answers calls in manual

reception mode. 

6

AUTO LISTING 

1: ON 
2: OFF 

• Enable automatic printing of the Activity Report when information on a

total of 50 fax transmissions/receptions accumulates. 

7

PRINT SELECTION

(1) TRANSMISSION 
     1: ALWAYS PRINTS
     2: ERROR ONLY 
     3: NEVER PRINTS 

• Select the condition for printing reports on fax transmissions. 

(2) BROADCAST 
     1: ALWAYS PRINTS
     2: ERROR ONLY 
     3: NEVER PRINTS

• Select the condition for printing reports on broadcast transmissions. 

(3) RECEPTION 
     1: ALWAYS PRINTS
     2: ERROR ONLY 
     3: NEVER PRINTS 

• Select the condition for printing reports on received faxes. 

(4) IMAGE MEM. PRINT 
     1: ALWAYS PRINTS
     2: ERROR ONLY
     3: NEVER PRINTS 

• Enable printing of the original image on transaction reports. 

8

RECALL TIMES BUSY 

00 - 14 (02) 

• Set the number of recall attempts that are made when the line is busy. 

9

RECALL TIMES ERR 

0 - 1 (1) 

• Set the number of recall attempts that are made when a communication

error occurs. 

10

RECALL INT. BUSY 

01 - 15 min. (03 min.) 

• Set the interval between recall attempts when the line is busy. 1 to 15 min-

utes can be selected.