Sharp MX-6500N / MX-7500N (serv.man12) Service Manual ▷ View online
MX-7500N MX-TR14 (EXIT TRAY UNIT) 12 – 3
C. Right paper exit unit installation
1) Fix the right paper exit unit with the screws (3 pcs.), and
arrange the wires.
2) Fix the ADU right upper cabinets F/R with the screws (each 2
pcs.).
D. Right paper exit section and cabinet
installation
1) Attach the right paper exit PG upper to the original positions.
2) Attach the right paper exit section to the original positions.
2) Attach the right paper exit section to the original positions.
Connect the harness.
3) Attach the inner cover of the right door, the cabinet upper of
the right door and the front cabinet upper of the right door to
the original positions.
MX-7500N MX-TU14 (EXIT TRAY CABINET) 13 – 1
MX-7500N
Service Manual
[13] MX-TU14 (EXIT TRAY CABINET)
1. Unpacking
A. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Preparation of service parts
For MX-7500N/6500N, the followin g service parts needs to pre-
pare.
B. Paper exit tray attachment
1) Fix the rear cover with the screws.
2) Fix the front right cover with the screws.
Hook the front right cover.
3) Fix the exit tray cabinet to the machine with the screw (Packed
items).
No.
Name
Quantity
1
Exit tray cabinet
1
2
Front cover
1
3
Paper holding arm
1
4
Full detection actuator
1
5
Screw
2
6
E-ring
1
7
Rear cover
1
8
Front right cover
1
No.
Parts Name
Parts Code
1
Front right cover (For MX-7500N/6500N)
GCAB-1457FCZ1
MX-7500N MX-TU14 (EXIT TRAY CABINET) 13 – 2
Fit the rib part to the hole of the rear cover. .
C. Front cover attachment
1) Attach the front cover, and fix it with the E-ring.
D. Paper holding arm and full detection actuator
attachment
1) Attach the paper holding arm and the full detection actuator.
MX-7500N MX-RB12 (PAPER PASS UNIT) 14 – 1
MX-7500N
Service Manual
[14] MX-RB12 (PAPER PASS UNIT)
1. Unpacking
A. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Sub assemble the Front Cover right
1) Remove the screw from the front cover right (Packed items
No.8) and remove the top cover.
2)
Install the front cover right top cover (Packed items of Main
machine), and fix the screw.
machine), and fix the screw.
B. Deliverly sponge removal
1)
Remove the deliverly sponge from the paper exit section as
the figure below.
the figure below.
NOTE: When removing the delivery sponge roller, take care not to
fall the fragment of it.
NOTE: If the fragment was fallen, never fail to remove it.
C. Installation of the accuride rail
1)
Fix the L plate (Packed items No.5) to the main unit with the
screw (Packed items No.1).
screw (Packed items No.1).
2)
Install the front cover right (Packed items No.8), and fix the
screw (Packed items No.1).
screw (Packed items No.1).
No.
Name
Quantity
1
M4 x 7 round-head bind screw
13
2
M4 x 10 mold tap screw
2
3
M4 x 10 S-tight bind screw
1
4
E-ring
1
5
L plate
1
6
Accuride rail
1
7
Paper guide
1
8
Front cover right
1
9
Front cover
1
10
Left cabinet
1
11
Relay unit
1
12
Band
2
1
2
3
4
5
6
7
8
9
10
11
12
1
2
TopPage
1
: ‘13/Nov
1
Click on the first or last page to see other MX-6500N / MX-7500N (serv.man12) service manuals if exist.