DOWNLOAD Sharp MX-6240N / MX-7040N (serv.man30) Service Manual ↓ Size: 457.96 KB | Pages: 18 in PDF or view online for FREE

MX-7040N  VARIOUS STORAGE DATA HANDLING  11 – 17

5)

Select the target HDD to delete the mirroring information.

6)

Click [Clear RIB in HDD] button.

7)

Click [OK] button. (The mirroring information is deleted.)

8)

After completion of deleting the mirroring information, "OK" is
displayed.

An error indicating an abnormality in the Setup.ini file when booting
the RIB Buster software.

The mirroring information has not been deleted normally.

Cause

Setup.ini file does not exists, or there is any 
abnormality in the file.

Countermeasures

Check to confirm that there is Setup.ini file in the 
proper directory and that there is no abnormality in 
the descriptions.

Cause

Temporary communication trouble, cable or other 
device trouble, HDD trouble

Countermeasures

1. Click [Clear RIB in HDD] button again.
2. If the trouble is not solved by procedure 1. , 
disconnect and connect the cable, change the 
devices, and reboot the RIB Buster. Then execute 
procedure 1. .

MX-7040N  VARIOUS STORAGE DATA HANDLING  11 – 18

Though the target HDD is connected, it is not displayed.

Cause

The target HDD is not registered in the Setup.ini file. 
Cable or other device trouble, HDD trouble

Countermeasures

1. Reboot RIB Buster, and click the frame section.
2. If the trouble is not solved by procedure 1. , replace 
the Setup. ini file and the RIB Buster {YYYYMMDD} 
with the latest version, and execute procedure 1. .
3. If the trouble is not solved by procedure 2. , 
disconnect and connect the cable, change the 
devices, and reboot the RIB Buster. Then execute 
procedure 1. .

MX-7040N  VARIOUS STORAGE DATA HANDLING  11 – 18

Though the target HDD is connected, it is not displayed.

Cause

The target HDD is not registered in the Setup.ini file. 
Cable or other device trouble, HDD trouble

Countermeasures

1. Reboot RIB Buster, and click the frame section.
2. If the trouble is not solved by procedure 1. , replace 
the Setup. ini file and the RIB Buster {YYYYMMDD} 
with the latest version, and execute procedure 1. .
3. If the trouble is not solved by procedure 2. , 
disconnect and connect the cable, change the 
devices, and reboot the RIB Buster. Then execute 
procedure 1. .

MX-7040N  VARIOUS STORAGE DATA HANDLING  11 – 18

Though the target HDD is connected, it is not displayed.

Cause

The target HDD is not registered in the Setup.ini file. 
Cable or other device trouble, HDD trouble

Countermeasures

1. Reboot RIB Buster, and click the frame section.
2. If the trouble is not solved by procedure 1. , replace 
the Setup. ini file and the RIB Buster {YYYYMMDD} 
with the latest version, and execute procedure 1. .
3. If the trouble is not solved by procedure 2. , 
disconnect and connect the cable, change the 
devices, and reboot the RIB Buster. Then execute 
procedure 1. .