Sharp MX-6240N / MX-7040N (serv.man154) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-1104
1. Model Name: MX6240N - MX7040N
2. Description: Upgrade of ICUM, ICU1, ICU2, and PCU-ROM
From mid-December 2012 production
ROM
control No.
ICUM
ICU1
ICU2
PCU
SCU
DSPF
FAX
E-Manual
B00
0200S100 0200S100 0101S100 0200S100 0100S100 0100S100 0101G100 0130S100
* ICU above is the version described in the ROM management label. Check that the actual
version is: ICUM (MAIN): 02.00.S1.00/ICUM (SUB): 02.00.S1.00/LANGUAGE:
01.04.S1.00/UICONTENTS: 02.00.S1.00/PCL (PROFILE): 01.00.S1.00; by Sim22-5.
* ICU1 above is also the version described in the ROM management label. Check that the
actual version is: ICU1 (MAIN): 02.00.S1.00/ICU1 (BOOT): 01.01.S1.0b/ICU1(SUB):
01.00.S1.0c; by SIM22-5.
Item of change: See the attached sheets.
version is: ICUM (MAIN): 02.00.S1.00/ICUM (SUB): 02.00.S1.00/LANGUAGE:
01.04.S1.00/UICONTENTS: 02.00.S1.00/PCL (PROFILE): 01.00.S1.00; by Sim22-5.
* ICU1 above is also the version described in the ROM management label. Check that the
actual version is: ICU1 (MAIN): 02.00.S1.00/ICU1 (BOOT): 01.01.S1.0b/ICU1(SUB):
01.00.S1.0c; by SIM22-5.
Item of change: See the attached sheets.
ROM Version Combination History Table
No.
ROM
Control
No.
ICUM
ICU1
ICU2
PCU
SCU
DSPF
FAX
E-Manual Action
T/R No
(2)
A12
0102S1 0101S1 0100S1 0101S1 0100S1 0100S1 0101G1 0130S1 2012/8
CCE-1058
(1)
A01
0101S1 0101S1 0100S1 0101S1 0100S1 0100S1 0101G1 0121S1
2012/7
Mid
ROM UPGRADE (2) - (3) Ver 0200S100
TECHNICAL BULLETIN
Date:
2
nd
April 2013
Model:
MX6240N – MX7040N
Ref.:
CCE-1104
Colour:
White
Page:
1 of 4
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-1104
[Description]
No.
Item
Details
1 Printer
When printing from Adobe Indesign in Mac OS environment, in some cases, PS error
occurred. This problem has been corrected.
occurred. This problem has been corrected.
2 Printer
When executing the consecutive print jobs in the environment where the external
accounting software was used, in some cases, the error occurred. This issue has been
corrected.
accounting software was used, in some cases, the error occurred. This issue has been
corrected.
3 Printer
When executing the print job with the invalid user, the user name/log-in name in the job
log became User Unknown/"PC log-in name specified by the driver". This has been
modified to become "User name specified by the driver"/"Log-in name specified by the
driver (User number).
log became User Unknown/"PC log-in name specified by the driver". This has been
modified to become "User name specified by the driver"/"Log-in name specified by the
driver (User number).
4 Printer
When printing the data with special font header, the PCL XL error occurred.
This problem has been corrected.
This problem has been corrected.
5 Printer
When printing PCL5 data with the mixed originals of Portrait/Landscape that contains
RESET COMMAND in the middle of the job, the print direction would become
inappropriate in the process of printing. This problem has been corrected.
RESET COMMAND in the middle of the job, the print direction would become
inappropriate in the process of printing. This problem has been corrected.
6 Printer
When printing PCL5 data with the certain font, the machine locked up. This problem
has been corrected.
has been corrected.
7 Printer
Even after performing the colour adjustment from Printer Settings on Web Page, the
setting could not be reflected when printing with PS. This problem has been corrected.
setting could not be reflected when printing with PS. This problem has been corrected.
8
Network
communication
communication
On SMB server (NAS) feature, if a print job was sent while several clients were
connecting to (browsing) NAS folder, MFP showed Waiting and never started printing.
This problem has been corrected.
connecting to (browsing) NAS folder, MFP showed Waiting and never started printing.
This problem has been corrected.
9
Network
communication
communication
If "Use Proxy Server" is ticked in Polling setting and then registered, MFP locked up.
This problem has been corrected.
This problem has been corrected.
10
Network
communication
communication
After security patch KB2585542 was applied to Windows, the connection using IPP SSL
would fail. This problem has been corrected.
would fail. This problem has been corrected.
11
Network
communication
communication
When "DNS Update" is "Enable", the machine hangs up due to the connection with the
external authentication application. This problem has been corrected.
external authentication application. This problem has been corrected.
12 Web Page
If SSL authentication was enabled on the connection test of "Internet Fax Setting" and
"E-mail Print Settings" on Web Page, the connection test passed as long as the
communication with SSL was "Successful" even though the username/password were
wrong.
"E-mail Print Settings" on Web Page, the connection test passed as long as the
communication with SSL was "Successful" even though the username/password were
wrong.
13 Authentication
When Caps Lock is ON on the hardware keyboard, in some cases, the authentication
error occurred when authenticating with the card. This problem has been corrected.
error occurred when authenticating with the card. This problem has been corrected.
14 Authentication
Modification has been made to be able to select by Soft SW whether to authenticate the
user already logged in by being authenticated with Active Directory or not when
receiving the print data.
Sim55-3 SW No.30 Data5
0: Authenticate
1: Not authenticate (Default)
user already logged in by being authenticated with Active Directory or not when
receiving the print data.
Sim55-3 SW No.30 Data5
0: Authenticate
1: Not authenticate (Default)
15 Authentication
Modification has been made to prevent the invalid user from the log-in when the
authentication is required in Active Directory environment.
authentication is required in Active Directory environment.
16 Authentication
Modification has been made to open not Folder Select screen but Main Folder screen
first when moving to Document Filling mode during the external authentication.
first when moving to Document Filling mode during the external authentication.
17 Authentication
Modification has been made not to display "Card reader is not connected" message until
the initialization is finalized by monitoring the initialization of IC card reader when starting
up/recovering from Energy Save.
the initialization is finalized by monitoring the initialization of IC card reader when starting
up/recovering from Energy Save.
18 OSA
Machine occasionally locked up with "Please wait" message being displayed after
performing a Copy job using OSA application. This problem has been corrected.
performing a Copy job using OSA application. This problem has been corrected.
19 OSA
When reading the card containing the keyboard information like Shift etc using OSA
application, the shift data would be displayed on the operation panel as the garbage
information. This problem has been corrected.
application, the shift data would be displayed on the operation panel as the garbage
information. This problem has been corrected.
20 OSA
When using in Equitrac environment, the log-in name information remained in the
password entry section when the screen changed to the password entry screen after
entering the log-in name. This problem has been corrected.
password entry section when the screen changed to the password entry screen after
entering the log-in name. This problem has been corrected.
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-1104
No.
Item
Details
21 OSA
When using Equitrac environment, the Auto Logout occasionally did not function even
when leaving the machine after logging in to the application. This problem has been
corrected.
when leaving the machine after logging in to the application. This problem has been
corrected.
22 Copier
When performing the program registration data which was set to 2-sided print, if the
paper type which was selected as "Disable Duplex" was set up to the tray, in some
cases, the checkmark for 2-sided print setting of the program registration would be OFF
during the process of copying, and then the data would be printed not on the double-
sided but on the single-side. This problem has been corrected.
paper type which was selected as "Disable Duplex" was set up to the tray, in some
cases, the checkmark for 2-sided print setting of the program registration would be OFF
during the process of copying, and then the data would be printed not on the double-
sided but on the single-side. This problem has been corrected.
23 Copier
Modification has been made to store also the paper size for the bypass tray on Copy Job
Program.
Program.
24 Copier
When using Tab Paper Copy function, the print result would be displaced. This problem
has been corrected.
has been corrected.
25 Copier
Modification has been made to display the error message in addition to the error sound
in the case of the condition that Dual Page Copy function cannot be carried out.
in the case of the condition that Dual Page Copy function cannot be carried out.
26 Scanner
Scan to FTP now supports "PASV mode".
27 PC-FAX
When performing the PC-Fax broadcast, if the machine was turned OFF/ON with the job
waiting to be sent, in some cases, the error occurred against the following transmission
reservation of PC-FAX with the message "Max. number of jobs have been already
reserved" .
waiting to be sent, in some cases, the error occurred against the following transmission
reservation of PC-FAX with the message "Max. number of jobs have been already
reserved" .
28 Main unit
For improvement of registration shift, the temperature correction control and others have
been reviewed and then improved. (SIM50-20/61-4 including the improvement of
registration adjustment pattern)
been reviewed and then improved. (SIM50-20/61-4 including the improvement of
registration adjustment pattern)
29 UI
When there were a lot of custom folders, displaying the user list screen became slow.
This problem has been corrected.
This problem has been corrected.
30 UI
Message which indicates toner end has been changed to “Prepare a new toner”.
31 Simulation
Modification has been made to establish "IMS CONTROL" in Auditor setting of SIM26-03
so that it is selectable whether to enable or disable the limitation of Image Send mode
when setting Auditor. (Default: OFF)
so that it is selectable whether to enable or disable the limitation of Image Send mode
when setting Auditor. (Default: OFF)
32 E-mail alert
Modification has been made to be able to select whether to send more than one Alert
Mails for the same event by Soft switch when recovering from Energy Save.
SIM55-03 SW No. 28 Data 3
0: Send more than one alert mails until the event is cleared. (Default)
1: Send the alert mail only once.
Mails for the same event by Soft switch when recovering from Energy Save.
SIM55-03 SW No. 28 Data 3
0: Send more than one alert mails until the event is cleared. (Default)
1: Send the alert mail only once.
33 Option
When 1K saddle finisher was installed, MFP locked up when reaching to the maximum
number of the saddle staple sets. This problem has been corrected.
number of the saddle staple sets. This problem has been corrected.
34 Option
When using the Web browsing extension KIT, the keyboard layout was set to Japanese-
keyboard. This has been corrected.
keyboard. This has been corrected.
35 Others
Modification has been made not to export the items (Address Book etc) which should be
exported with storage backup when exporting the device cloning data from System
Settings on the machine.
exported with storage backup when exporting the device cloning data from System
Settings on the machine.
36 Others
When moving the device cloning data from the old model that "Default Preview" function
does not exist, in some cases, the copy job would not be output. This problem has been
corrected.
does not exist, in some cases, the copy job would not be output. This problem has been
corrected.
37 Others
If the device cloning data of the machine with "Preview" being set was imported to the
machine with no "Preview" function, the copy would be unable to be performed. This
problem has been corrected.
machine with no "Preview" function, the copy would be unable to be performed. This
problem has been corrected.
38 Others
When the toner door was opened/closed in a short time (approx. 1-sec) during printing,
in some cases, "Change the toner cartridge" message would be displayed. This
problem has been corrected.
in some cases, "Change the toner cartridge" message would be displayed. This
problem has been corrected.
39 Others
Modification has been made to change the frequency to obtain the information of the
remaining toner using MIB with SOFT SW.
SIM55-3 SW No. 32 Data 2
0: every 25% (Default)
1: every 5%
remaining toner using MIB with SOFT SW.
SIM55-3 SW No. 32 Data 2
0: every 25% (Default)
1: every 5%
Sharp Electronics (UK) Ltd., Technical Services Group
CCE-1104
No.
Item
Details
40 Others
Modification has been made to be able to acquire the maintenance code and error code
with MIB.
with MIB.
41 Others
Modification has been made not to display the message that the data is changed when
the address is registered from Sharp Desk Mobile.
the address is registered from Sharp Desk Mobile.
42 Others
Support for the change of ICU2/BIOS flash memory maker (Macronix/Eon are now both
supported) and also the change of ICU1/ICU2 memory.
supported) and also the change of ICU1/ICU2 memory.
43 Others
Modification has been made to power OFF the machine after 1 minute at the completion
of the operation if the machine is turned OFF with Power ON/OFF Schedule Setting
while the user is operating some function like Preview etc.
of the operation if the machine is turned OFF with Power ON/OFF Schedule Setting
while the user is operating some function like Preview etc.
Display