Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) User Manual / Operation Manual ▷ View online
1-30
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
POWER ON/OFF SCHEDULE SETTING
Use this function to set the times for turning the power on and off for the machine to reduce power consumption.
SPECIFIC DATE OPERATION SETTINGS
When you must have the machine perform exceptionally many print jobs or other special operation on a certain day, you
can specify the day as a "Specific Date" and define an energy saving pattern only for that day.
can specify the day as a "Specific Date" and define an energy saving pattern only for that day.
Setting Power ON/OFF Scheduling Function
In "Setting mode", select [System Settings] → [Energy Save] → [Power ON/OFF Schedule Setting].
In "Setting mode", select [System Settings] → [Energy Save] → [Power ON/OFF Schedule Setting].
To specify operation for the specific date:
"Setting mode (administrator)" select [System Settings] → [Energy Save] → [Specific Date Operation Settings].
"Setting mode (administrator)" select [System Settings] → [Energy Save] → [Specific Date Operation Settings].
9:00
12:00
13:00
18:00
ON
ON
OFF
OFF
OFF
Start time
Lunch break
Finish time
1-31
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
MOTION SENSOR
This sensor detects the presence of a person that approaches the machine, and automatically wakes the machine from
sleep mode (Motion Sensor Mode Only).
Three settings are available for the detection range (
sleep mode (Motion Sensor Mode Only).
Three settings are available for the detection range (
/
/
).
The motion sensor detects the movement of sources of heat.
The detection range may vary depending on the installation site and environment (ambient temperature, etc.).
The detection range may vary depending on the installation site and environment (ambient temperature, etc.).
The motion sensor may not operate correctly in the conditions below.
• An object is in front of the motion sensor
• There are scratches or dirt on the motion sensor cover
• The motion sensor is directly exposed to sunlight or air flow
• The motion sensor is damaged
• There is a source of heat such as a heater nearby
• An object is moving in the detection range
• There are scratches or dirt on the motion sensor cover
• The motion sensor is directly exposed to sunlight or air flow
• The motion sensor is damaged
• There is a source of heat such as a heater nearby
• An object is moving in the detection range
To enable the motion sensor
"Setting mode (administrator)" select [System Settings] → [Energy Save] → [Eco Setting] → [Sleep Mode Power Level].
"Setting mode (administrator)" select [System Settings] → [Energy Save] → [Eco Setting] → [Sleep Mode Power Level].
Motion sensor
Near
Far
Detection range
Approx.
maximum
1.5 m
maximum
1.5 m
60 degrees
1-32
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
USER AUTHENTICATION
User authentication restricts the use of the machine to users that have been registered. The functions that each user is
allowed to use can be specified, allowing the machine to be customized to meet the needs of your workplace.
When the administrator of the machine has enabled user authentication, each user must log in to use the machine.
There are different types of user authentication, and each type has a different login method.
For more information, see the explanations of the login methods.
allowed to use can be specified, allowing the machine to be customized to meet the needs of your workplace.
When the administrator of the machine has enabled user authentication, each user must log in to use the machine.
There are different types of user authentication, and each type has a different login method.
For more information, see the explanations of the login methods.
►
AUTHENTICATION BY USER NUMBER (page 1-32)
►
AUTHENTICATION BY LOGIN NAME/PASSWORD (page 1-34)
AUTHENTICATION BY USER NUMBER
The following procedure is used to log in using a user number received from the administrator of the machine.
When starting the machine, the login screen appears.
When starting the machine, the login screen appears.
When controlled by user number
If "A Warning when Login Fails" is enabled in the system settings, the operation panel will be locked for five minutes if an
incorrect user number is entered three times in a row.
Contact the machine administrator to check the user number assigned for you.
incorrect user number is entered three times in a row.
Contact the machine administrator to check the user number assigned for you.
1
Enter your user number (5 to 8 digits) using the numeric keys.
Each entered digit will be displayed as "
".
1
4
5
6
2
0
3
C
User Authentication
Please input user number.
CA
Admin Login
OK
7
8
9
1-33
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
2
Tap the [OK] key.
If the entered user number is authenticated, the number of
remaining pages that the user can copy or scan is displayed.
When a limitation is set for the number of pages that a user
can use, the use count for the user that has logged in is
displayed.
remaining pages that the user can copy or scan is displayed.
When a limitation is set for the number of pages that a user
can use, the use count for the user that has logged in is
displayed.
• To limit the number of pages that a user can use:
In "Setting mode (administrator)", select [User Control] → [Pages Limit Group].
• To hide the number of pages that can be used after login:
In "Setting mode (administrator)", disable [User Control] → [Default Settings] → [Display Usage Status after Login].
• To change the message display time:
In "Setting mode" (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] →
[Condition Settings] → [Message Time Setting].
[Condition Settings] → [Message Time Setting].
When the user number is an 8-digit number, this step is not necessary. Login takes place automatically after the user
number is entered.
number is entered.
3
When you have finished using the
machine and are ready to log out, tap
[Logout].
machine and are ready to log out, tap
[Logout].
1
4
5
6
2
0
3
7
8
9
C
User Authentication
Please input user number.
CA
Admin Login
OK
(1)
(2)
Exposure
Address Book
Auto
Original
Mixed Size Orig.
Resolution
Super Fine
Job Build
Original Count
Slow Scan Mode
Address Fax Number
Logout
Admin
LINE
PRINTER
Job Status
Others
Preview
Speaker
Start
Scan Size
Auto
Auto
reception memory
100%
100%
Send Size
Sending History
Call Search Number
Call Program
Call Registered settings
Direct TX
Verification Stamp
Send Same Image
as Fax Address
as Fax Address
Easy
Scan
Scan
HDD
File retrieve
File retrieve
CA
8½x11
8½x11
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) service manuals if exist.