DOWNLOAD Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) Service Manual ↓ Size: 58.19 MB | Pages: 127 in PDF or view online for FREE

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE

These functions help save power consumption by managing operations of sections prone to high power consumption. 
The machine provides two power-saving modes.

In addition to these two modes, using the following functions in conjunction helps reduce even more power 
consumption.

The eco function settings are set in a batch. "Custom" and "Eco" are available.
Setting values applied by each mode is as follows.

If no operations take place, this mode will turn off the power to the operation 
panel and the fusing unit, and makes the machine wait in the lowest power 
consumption state.
Although the power-saving rate is higher, the wakeup time is longer.

This mode lowers the temperature of the fusing unit and makes the machine 
wait in low power consumption state.
Compared to Auto Power Shut-Off Timer, the power-saving rate is lower, but 
the wakeup time is shorter.

Shows recommended copy/print settings for copy, document filing reprint, 
and direct print.

The machine returns from Auto Power Shut-Off and enters Auto Power 
Shut-Off mode as soon as printing is completed.

The machine is operated with the fusing unit turned off for non-printing 
operations (that do not use the fusing unit) such as fax and image 
transmission.

Use this function to set the times for turning the power on and off to reduce 
power consumption.

When you must have the machine perform exceptionally many print jobs or 
other special operation on a certain day, you can specify the day as a 
"Specific Date" and define an energy saving pattern only for that day.

This mode is used to reduce toner consumption.

This sensor detects the presence of a person that approaches the machine, 
and automatically wakes the machine from sleep mode (Motion Sensor 
Mode Only).

Select whether priority is given to power saving or wakeup time.

Eco Scan

On (Sending Modes Only)

On (All Modes Except Copy)

Auto Power Shut-Off Timer

Change transition time by time of day.: Auto

Fix transition time.: 1min.

As soon as the remote job is finished, 
enter Auto power shut off mode.

Off

On

Preheat Mode Setting

1min.

1min.

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE

Each Energy Save settings in System Setting is not applied when Eco mode is used. 

This mode turns off the power to the operation panel and the fusing unit, and makes the machine wait in the lowest 
power consumption state.
Auto Power Shut-Off Timer will activate when the set duration of time elapses in waiting status without executing a job.
Compared to preheat mode, the power-saving rate is considerably higher but the wakeup time is longer.

The [Power Save] button blinks when the machine is in Auto Power Shut-Off Timer.

Auto Power Shut-Off Timer is also activated by pressing the [Power Save] button while the [Power Save] button is not lit.
This mode is cleared when print data is being received, fax data is being output, or when the [Power Save] button is 
pressed while it is blinking.

A message appears 15 seconds before Auto Power Shut-Off Mode is entered.
To close the message and continue normal operation, tap the [Continue] button.
The message appears again 15 seconds before the end of the extension of normal operation time.
If no action is taken within 15 seconds after the message appears, the machine enters auto power shutoff mode.

This mode lowers the temperature of the fusing unit and makes the machine wait in low power consumption state.
Preheat mode will activate when the set duration of time elapses in waiting status without executing a job.
Compared to Auto Power Shut-Off Mode, the amount of energy saved is less and the wakeup time is shorter.

Turn off Panel Display during 
pre-heat mode

On

On

Sleep Mode Power Level

Low Power

Low Power

To set mode settings
"Setting mode  (administrator)" → select  [System Settings] → [Energy Save] →  [Eco Setting] → [Mode Setting].

To set Auto Power Shut-Off Timer:
In "Setting mode (administrator)", select  [System Settings] → [Energy Save] → [Eco Setting] → [Auto Power Shut-Off].

To set display of the message:
In "Setting mode (administrator)", select  [System Settings] → [Energy Save] → [Eco Setting] → [Display Message When 
Extending Transition Time to Preheat/Auto Power Shut-Off Mode].

[Power Save] button/indicator

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE

In the preheat mode, the [Home Screen] key is lit and the light goes off for the touch panel and the [Power Save] button.
The touch panel is cleared when it is tapped or the [Home Screen] button is pressed.

A message appears 15 seconds before Preheat Mode is entered.
To close the message and continue normal operation, tap the [Continue] button.
If no action is taken within 15 seconds after the message appears, the machine enters preheat mode.

Shows recommended copy/print settings for copy, document filing reprint, and direct print.

When you change to copy mode (normal mode), the settings recommended for copy mode appear.
Recommended settings: 2-Sided Copy, N-Up, B/W Copy and Image Orientation

When you tap the [Choose Print Settings] in the action panel on the file list screen of document filing, the settings 
recommended for this mode appear.
Recommended settings: 2-Sided Print, N-Up, and Print B/W.

When you tap the [Choose Print Settings] in the action panel on the file list screen of direct print, the settings 
recommended for this mode appear.
Recommended settings: 2-Sided Print, N-Up and Print B/W.

To set preheat mode:
"Setting mode  (administrator)" → select  [System Settings] → [Energy Save] →  [Eco Setting] → [Preheat Mode Setting].

To set display of the message:
In "Setting mode (administrator)", select  [System Settings] → [Energy Save] → [Eco Setting] → [Display Message When 
Extending Transition Time to Preheat/Auto Power Shut-Off Mode].

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE

Printing or outputting received fax data in Auto Power Shut-Off Timer turns on the power, and then the machine returns 
to Auto Power Shut-Off Mode immediately after completing the print job.

Non-print jobs such as sending a scanned original are performed with the fusing unit turned off.

To set "As soon as the remote job is finished, enter Auto power shut off mode.":
In "Setting mode (administrator)", select  [System Settings] → [Energy Save] → [Eco Setting] → [As soon as the remote job 
is finished, enter Auto power shut off mode.]

To set Eco scan:
"Setting mode  (administrator)" → select  [System Settings] → [Energy Save] →  [Eco Setting] → [Eco Scan Setting] .

H

H