Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) User Manual / Operation Manual ▷ View online
1-6
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
AUTOMATIC DOCUMENT FEEDER AND DOCUMENT
GLASS
(1)
Document feeding cover
Open this cover to remove an original misfeed.
Open this cover to remove an original misfeed.
(2)
Original guides
These guides help ensure that the original is scanned
correctly.
Adjust the guides to the width of the original.
These guides help ensure that the original is scanned
correctly.
Adjust the guides to the width of the original.
(3)
Document feeder tray
Place the original.
Place the original with the print side facing up.
Place the original.
Place the original with the print side facing up.
► AUTOMATIC DOCUMENT FEEDER (page 1-70)
(4)
Original exit tray
The original is discharged to this tray after scanning.
The original is discharged to this tray after scanning.
(5)
Original size detector
This unit detects the size of an original placed on the
document glass.
This unit detects the size of an original placed on the
document glass.
► DOCUMENT GLASS (page 1-72)
(6)
Scanning area
Originals placed in the automatic document feeder are
scanned here.
Originals placed in the automatic document feeder are
scanned here.
► CLEANING THE DOCUMENT GLASS AND
AUTOMATIC DOCUMENT FEEDER (page 1-117)
(7)
Document glass
If you want to scan books or other thick originals that
cannot be fed through the automatic document feeder,
place them on this glass.
If you want to scan books or other thick originals that
cannot be fed through the automatic document feeder,
place them on this glass.
► DOCUMENT GLASS (page 1-72)
(3)
(1)
(4)
(5)
(2)
(6)
(7)
1-7
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
SIDE AND BACK
(1)
LAN connector
Connect the LAN cable to this connector when the
machine is used on a network.
Use a shielded LAN cable.
Connect the LAN cable to this connector when the
machine is used on a network.
Use a shielded LAN cable.
(2)
Extension phone jack (TEL)*
When the fax function of the machine is used, an
extension phone can be connected to this jack.
When the fax function of the machine is used, an
extension phone can be connected to this jack.
(3)
Telephone line jack (LINE)*
When the fax function of the machine is used, the
telephone line is connected to this jack.
When the fax function of the machine is used, the
telephone line is connected to this jack.
(4)
Power plug
* Optional
(1)
(4)
(2)
(3)
1-8
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
OPERATION PANEL
This section describes the names and functions of the respective parts of the operation panel.
(1)
Data notification indicator
The indicator lights solidly or blinks to indicate the status
of a job.
When the Job separator or Exit tray unit (right tray) is
used for output, this blinks until the output is removed.
The indicator lights solidly or blinks to indicate the status
of a job.
When the Job separator or Exit tray unit (right tray) is
used for output, this blinks until the output is removed.
► DATA NOTIFICATION INDICATOR AND ERROR
INDICATOR (page 1-9)
(2)
Touch panel
Messages and keys appear on the touch panel display.
Operate the machine by directly tapping the displayed keys.
Messages and keys appear on the touch panel display.
Operate the machine by directly tapping the displayed keys.
► TOUCH TYPES (page 1-11)
(3)
Error indicator
Lights solidly or blinks to indicate the status of the error.
Lights solidly or blinks to indicate the status of the error.
► DATA NOTIFICATION INDICATOR AND ERROR
INDICATOR (page 1-9)
(4)
Main power indicator
This lamp lights up when the machine's main power switch
is in the “
This lamp lights up when the machine's main power switch
is in the “
” position.
Blinks green during the time that the [Power] button does
not operate immediately after the main power switch is
switched on.
not operate immediately after the main power switch is
switched on.
► TURNING ON THE POWER (page 1-10)
(5)
[Power] button
Use this button to turn the machine's power on and off.
Use this button to turn the machine's power on and off.
► TURNING ON THE POWER (page 1-10)
(6)
[Power Save] button/indicator
Use this button to set the machine to Sleep mode for
energy saving.
[Power Save] button blinks when the machine is in Sleep
Mode.
Use this button to set the machine to Sleep mode for
energy saving.
[Power Save] button blinks when the machine is in Sleep
Mode.
► AUTO POWER SHUT-OFF MODE (page 1-27)
(7)
[Home Screen] key
Use this button to display the home screen.
Use this button to display the home screen.
► HOME SCREEN (page 1-14)
(1)
(2)
(3)
(4)
(5) (6) (7)
[Home Screen] key
Use your finger to touch the [Home Screen] key.
If you use a pen or other tool to touch the key, it may not operate properly.
Risk of malfunctioning if you use with jewelry or other accessories.
Use your finger to touch the [Home Screen] key.
If you use a pen or other tool to touch the key, it may not operate properly.
Risk of malfunctioning if you use with jewelry or other accessories.
You can change the angle of the touch panel.
1-9
BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
DATA NOTIFICATION INDICATOR AND ERROR INDICATOR
The data notification indicator and the error indicator lights solidly or blinks to indicate the status of the machine.
Error indicator (red)
Data notification indicator (green)
Pattern 1
Pattern 2
Pattern 3
Solidly
Errors that do not stop machine
operation, such as almost out of toner.
operation, such as almost out of toner.
Job in progress,
such as paper
feeding or output.
such as paper
feeding or output.
Ready state or other
state where jobs can
be accepted.
state where jobs can
be accepted.
An original has been
placed in the
document feeder
placed in the
document feeder
Blinks
Errors that stop machine operation,
such as misfeeds and out of toner.
such as misfeeds and out of toner.
A fax is being received
When the job separator (upper tray) or exit tray unit (right tray) is used for
output, this blinks until the output is removed.
When the job separator (upper tray) or exit tray unit (right tray) is used for
output, this blinks until the output is removed.
To set the status indicated by the data notification indicator
In "Setting mode (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Status Indicator
Setting].
In "Setting mode (administrator)", select [System Settings] → [Common Settings] → [Device Control] → [Status Indicator
Setting].
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) service manuals if exist.