Sharp MX-2630 Service Manual ▷ View online
MX-2630N MX-FN29 (SADDLE STITCH FINISHER) 11 – 2
2. Installation
A. Installation of earth plate
1)
Install the earth plate (Packed items (No.6)) with the screws
(Packed item (No.3 M3x6)).
(Packed item (No.3 M3x6)).
B. Installation of the guide plate
1)
Install the guide plate (Packed items (No.2)) with the screws
(Packed item (No.3 M3x6)). For the positions of the screws,
please see the picture below.
(Packed item (No.3 M3x6)). For the positions of the screws,
please see the picture below.
C. Installation of the shift tray
1)
Insert the shift tray (Packed item No.1) into the finisher of the main
unit, and install the shift tray with the screw (Packed item No.4
M4x8)).
unit, and install the shift tray with the screw (Packed item No.4
M4x8)).
MX-2630N MX-FN29 (SADDLE STITCH FINISHER) 11 – 3
D. Installation of the bracket
1)
Install the bracket (Packed item No.7) with the screw (Packed
item (No.5 M4x12). Before installing the finisher, be sure to install
the interface unit.
item (No.5 M4x12). Before installing the finisher, be sure to install
the interface unit.
E. Installation of the finisher
1)
Attach the connector of the finisher and fix it with the screw.
2)
Open the front cover.
3)
Remove the screw fixing the finisher in the picture below.
Pull out the lock lever, and lower it.
Ĭ
ĭ
MX-2630N MX-FN29 (SADDLE STITCH FINISHER) 11 – 4
4)
Bring the finisher near the main unit, and connect them.
5)
Install the finisher fixing screw.
6)
Close the front cover of the finisher.
7)
Unscrew the screw of the connector cover of the man unit, and
remove the connector cover.
remove the connector cover.
Front
Right side
Be careful not to fix
with the screw here.
with the screw here.
Push the lock lever.
Move the lock lever to
the upper side.
the upper side.
MX-2630N MX-FN29 (SADDLE STITCH FINISHER) 11 – 5
8)
Fix the plate with the tied cables to the main unit with the screw
(M3x6), and connect the connector of the harness. Tie the har-
ness of the interface unit and the harness of the finisher with the
clamp, and fix it.
(M3x6), and connect the connector of the harness. Tie the har-
ness of the interface unit and the harness of the finisher with the
clamp, and fix it.
9)
Fix the connector cover of the main unit with the screw.
F. Installation of the saddle stitch finisher
The basic installation procedure is the same as the finisher.
Only the installation method of the saddle tray is different.
1)
Lift the paper fixing arm, and install the saddle tray.
2)
Lower the paper fixing arm.
Click on the first or last page to see other MX-2630 service manuals if exist.