Sharp AR-PN1 Service Manual ▷ View online
3-21
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
2) Remove the screw [3], and detach the
interface retainer [4].
3) Free the six harness retainers [5], and
disconnect the connector [6].
4) Free the harness [7] from the harness
retainer [5].
5) Free the harness [7] from the edge
saddle [8]; then, disconnect the two
connectors [9].
connectors [9].
F03-102-29
6) Release the harness retainer [10], and
disconnect the connector [11].
7) Free the harness [12] from the harness
retainer [10].
8) Free the harness [12] for the edge
saddle [13]; and disconnect the two
connectors [14].
connectors [14].
F03-102-30
[6]
[7]
[3]
[7]
[8]
[9]
[7]
[5]
[5]
[4] [5] [7] [5]
[12]
[11]
[10]
[13]
[14]
Chap03.p65
3/28/01, 12:09 PM
21
3-22
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
9) Remove the screw [15], and free the
claw [17] of the harness guide from the
long angle [16] of the base plate.
long angle [16] of the base plate.
F03-102-31
10) Disconnect the two connectors [18], and
free the harness [20] from the edge
saddle [19].
saddle [19].
F03-102-32
[17]
[15]
[16]
[18]
[18]
[19]
[20]
Chap03.p65
3/28/01, 12:09 PM
22
3-23
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
11) Remove the three screws [21].
F03-102-33
12) Remove the screw [22], and detach the
staple/fold drive unit [23].
F03-102-34
[21]
[21]
[21]
[22]
[23]
Chap03.p65
3/28/01, 12:09 PM
23
3-24
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
1.2.8 Removing the Feed Motor Unit
1) Remove the rear cover. (See 1.1.3.)
2) Open the harness retainer [1], and dis-
2) Open the harness retainer [1], and dis-
connect the two connectors [2].
3) Remove the screw [3], and detach the
harness guide [4].
4) Remove the three screws [5], and detach
the feed motor unit [6].
F03-102-35
1.2.9 Removing the Feed Roller
1) Remove the upper cover. (See 1.1.4.)
2) Remove the upper right cover assembly.
2) Remove the upper right cover assembly.
(See 1.1.6.)
3) Remove the feed motor unit. (See
1.2.6.)
4) Remove the screw [1].
5) Remove the stop ring [2], and detach
5) Remove the stop ring [2], and detach
the bushing [3].
F03-102-36
[5]
[5]
[3]
[4]
[6]
[1]
[2]
[2]
[1] [3]
Chap03.p65
3/28/01, 12:09 PM
24
Click on the first or last page to see other AR-PN1 service manuals if exist.