Sharp AR-PN1 Service Manual ▷ View online
3-1
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
1 Finisher Saddle Unit
1.1 Externals and Controls
[1] Tray (2)
[2] Rear cover (3)
[3] Front cover (5)
[4] Front door
[5] Upper door
[6] Upper right cover assembly (4)
[7] Jam removal cover
[2] Rear cover (3)
[3] Front cover (5)
[4] Front door
[5] Upper door
[6] Upper right cover assembly (4)
[7] Jam removal cover
The number in parentheses indicates the
number of mounting screws used.
number of mounting screws used.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
F03-101-01
1.1.1 Removing the Delivery Tray
1) Remove the four screw [1], and detach
the delivery tray [2].
[2]
[1]
F03-101-02
Chap03.p65
3/28/01, 12:09 PM
1
3-2
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
1.1.2 Removing the Front Cover
1) Open the front door [1].
2) While picking the claw [2], detach the
2) While picking the claw [2], detach the
fold jam releasing dial [3].
3) Remove the two screws [4].
F03-101-03
[1]
[4]
[4]
[3]
[2]
4) Remove the three screws [5], and detach
the front cover [6].
[6]
[5]
[5]
F03-101-04
Chap03.p65
3/28/01, 12:09 PM
2
3-3
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
1.1.3 Removing the Rear Cover
1) Remove the two screws [1] on the
pickup side, and remove the screw [2]
on the delivery side; then, detach the
rear cover [3].
on the delivery side; then, detach the
rear cover [3].
[3]
[1]
[3]
[2]
F03-101-06
1.1.4 Removing the Upper Cover
1) Open the upper cover [1], and turn the
cover band retainer [2] to the left to re-
move it.
move it.
2) Remove the cover band [3].
F03-101-05
[2]
[1]
[3]
F03-101-07
Chap03.p65
3/28/01, 12:09 PM
3
3-4
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
3) Remove the screw [4], and detach the
processing tray rear cover [5]; then, de-
tach the upper cover [6].
tach the upper cover [6].
[6]
[4]
[5]
F03-101-08
1.1.5 Removing the Processing Tray Upper Cover
1) Remove the front cover. (See 1.1.2.)
2) Remove the rear cover. (See 1.1.3.)
3) Remove the upper cover. (See 1.1.4.)
4) Disconnect the connector [1], and re-
2) Remove the rear cover. (See 1.1.3.)
3) Remove the upper cover. (See 1.1.4.)
4) Disconnect the connector [1], and re-
move the screw [2].
[2]
[1]
F03-101-09
Chap03.p65
3/28/01, 12:09 PM
4
Click on the first or last page to see other AR-PN1 service manuals if exist.