Sharp AR-PN1 Service Manual ▷ View online
3-17
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
5) Disconnect the three connectors [7].
6) Release the two claws [8] of the harness
6) Release the two claws [8] of the harness
retainer, and detach the motor harness
[9].
[9].
F03-102-22
7) Remove the stop ring [10], and detach
the timing belt [11].
8) Disconnect the connector [12], and free
the harness [14] from the edge saddle
[13].
[13].
F03-102-23
[11]
[10]
[13]
[14]
[12]
[9]
[8]
[7]
Chap03.p65
3/28/01, 12:09 PM
17
3-18
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
9) Remove the two screws [15], and slide
the processing tray assembly [16] to the
rear; then, lift it to detach.
rear; then, lift it to detach.
F03-102-24
1.2.6 Removing the Paddle Assembly
1) Remove the processing tray assembly.
(See 1.2.3.)
2) Place the processing tray assembly [1]
as shown.
Be sure to take care not to dam-
age the aligning plate [2].
age the aligning plate [2].
F03-102-25
[16]
[15]
[2]
[1]
Chap03.p65
3/28/01, 12:09 PM
18
3-19
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
3) Detach the timing belt [3], and remove
the two screws [4].
F03-102-26
[3]
[4]
[4]
Chap03.p65
3/28/01, 12:09 PM
19
3-20
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
4) Separate the processing tray assembly
[5] and the paddle assembly [6] as
shown.
shown.
F03-102-27
1.2.7 Removing the Staple/Fold Drive Unit
1) Open the front door [1], and slide out
the stapler unit [2] slightly to the front.
F03-102-28
[6]
[5]
[1]
[2]
Chap03.p65
3/28/01, 12:09 PM
20
Click on the first or last page to see other AR-PN1 service manuals if exist.