Sharp AR-PN1 Service Manual ▷ View online
3-33
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
1.3.2 Removing the Slide Home Position PCB
1) Open the front door [1], and turn the tab
[2] on the stapler slide in the direction
of the arrow to slide the stapler to the
frontmost point.
of the arrow to slide the stapler to the
frontmost point.
2) Remove the stapler unit. (See 1.2.1.)
F03-103-02
3) Place the stapler unit [3] as shown.
4) Remove the two screws [4], and detach
4) Remove the two screws [4], and detach
the guide [5].
F03-103-03
5) Turn the tab [2] on the stapler side in
the direction of the arrow so that that
the fixing screw [7] of the slide home
position PCB [6] is in view through the
round hole.
the fixing screw [7] of the slide home
position PCB [6] is in view through the
round hole.
6) Remove the fixing screw [7].
F03-103-04
[1]
[2]
[4]
[5]
[4]
[3]
[2]
[6]
[7]
Chap03.p65
3/28/01, 12:09 PM
33
3-34
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
7) Disconnect the connector [8].
8) Remove the flexible cable retainer [9].
9) Free the lock [10] of the connector in
8) Remove the flexible cable retainer [9].
9) Free the lock [10] of the connector in
the direction of the arrow; then, detach
the flexible cable [11], and then detach
the side home position PCB [12].
the flexible cable [11], and then detach
the side home position PCB [12].
F03-103-05
[12]
[8]
[10]
[11]
[9]
Chap03.p65
3/28/01, 12:09 PM
34
3-35
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
2. Puncher Unit (option)
2.1 Puncher Driving System
2.1.1 Removing the Punch Motor
1) Remove the two screws [1].
2) Disconnect the connector [2] to remove
2) Disconnect the connector [2] to remove
the punch motor [3].
F03-201-01
2.1.2 Removing the Horizontal Registration Motor
1) Disconnect connector J1001 [1].
2) Remove the harness [3] from the harness
2) Remove the harness [3] from the harness
guide [2].
3) Remove the two screws [4] to remove
the horizontal registration motor [5].
F03-201-02
[2]
[1]
[3]
[4]
[5]
[2]
[1]
[3]
Chap03.p65
3/28/01, 12:09 PM
35
3-36
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
2.1.3 Removing the Punch Unit
1) Remove the waste case.
2) Remove the screw [1] to detach the jam
2) Remove the screw [1] to detach the jam
processing cover [2].
F03-201-03
3) Disconnect the connector J1005 [3]
4) Remove the harness [5] from the harness
4) Remove the harness [5] from the harness
guide [4].
F03-201-04
5) Disconnect the connector [6].
6) Remove the screw [7] and sensor sup-
6) Remove the screw [7] and sensor sup-
port plate [8].
F03-201-05
[2]
[1]
[3]
[5]
[4]
[6]
[7]
[8]
Chap03.p65
3/28/01, 12:09 PM
36
Click on the first or last page to see other AR-PN1 service manuals if exist.