Sharp AR-PN1 Service Manual ▷ View online
3-37
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
7) Remove the screw [9] and washer [10].
8) Disconnect the connector [11].
9) Remove the two screws [12] to detach
8) Disconnect the connector [11].
9) Remove the two screws [12] to detach
the base cover [13].
F03-201-06
10) Remove the four screws [14] to remove
the upper transmission sensor unit [15]
and lower transmission sensor [16].
and lower transmission sensor [16].
F03-201-07
[13]
[9]
[10]
[12]
[11]
[14]
[14]
[14]
[15]
[16]
Chap03.p65
3/28/01, 12:09 PM
37
3-38
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
11) Remove the punch unit [18] from the
horizontal registration motor assembly
[17].
[17].
Ff03-201-08
2.2 PCBs
2.2.1 Removing the Punch Controller PCB
1) Remove the two screws [1].
2) Disconnect the five connectors [2] to re-
2) Disconnect the five connectors [2] to re-
move the punch controller PCB [3].
F03-202-01
[17]
[18]
[2]
[3]
[2]
[2]
[1]
Chap03.p65
3/28/01, 12:09 PM
38
3-39
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
2.2.2 Removing the PhotoSensor PCB
1) Remove the punch motor. (See 2.1.1.)
2) Remove the screw [1].
3) Remove the harness [3] from the harness
2) Remove the screw [1].
3) Remove the harness [3] from the harness
guide [2] on the PCB, then detach the
PCB cover [4].
PCB cover [4].
F03-202-02
4) Disconnect the connector [5] to remove
the photosensor PCB [6].
F03-202-03
[4]
[1]
[2]
[3]
[6]
[5]
Chap03.p65
3/28/01, 12:09 PM
39
3-40
CHAPTER 3 MECHANICAL SYSTEMS
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SADDLE FINISHER G1 REV.0 MAR. 2001
2.2.3 Removing the LED PCB
1) Remove the waste case.
2) Disconnect connector J1005 [1].
3) Remove the harness [3] from the harness
2) Disconnect connector J1005 [1].
3) Remove the harness [3] from the harness
guide [2].
F03-202-04
4) Remove the screw [4] and washer [5].
5) Disconnect the connector [6].
6) Remove the screw [7] to detach the base
5) Disconnect the connector [6].
6) Remove the screw [7] to detach the base
cover [8].
F03-202-05
[1]
[3]
[2]
[8]
[4]
[5]
[7]
[6]
Chap03.p65
3/28/01, 12:09 PM
40
Click on the first or last page to see other AR-PN1 service manuals if exist.