Sharp AR-P15 (serv.man3) User Manual / Operation Manual ▷ View online
23
Prepar
ing f
or AR-
P15 Setup
In order to operate the AR-P15 Setup from WebPage, you should access to the WebPage home page
for Administrator.
1
Start the Internet browser on your computer.
2
Enter “http://[IP address or DNS name]/adm” in
the Address entry field of the browser, and
press [Enter].
the Address entry field of the browser, and
press [Enter].
• Enter the IP address or DNS name assigned to the
AR-P15 instead of [IP address or DNS name].
4
The WebPage home page for administrator
appears.
appears.
3
Enter the password and click on [OK].
• If the administrator password has not been set, leave
the password field blank and click on [OK].
SUPPLEMENT:
When you set up the AR-P15 for the first
time, an administrator password is not set.
If you want to set the administrator
password first, see “Setting Administrator
Password”.
P115
Accessing WebPage for Administrator
24
Connecting to the Parallel Port
The following describes how to connect the printer (PC/AT machine, or its equivalent) to a computer
using a printer cable (so-called “parallel connection”).
PREPARATION:
The IEEE 1284 compatible printer cable is an optional item. Please obtain one that is compatible
with your computer.
1
Turn OFF the power of the printer and the
power of the computer.
power of the computer.
3
Insert the printer cable all the way to the deep
end of the parallel interface connector, and
secure it with the latches on both sides of the
connector.
end of the parallel interface connector, and
secure it with the latches on both sides of the
connector.
4
Attach the removed cover as before.
SUPPLEMENT:
The parallel port connector may vary depending on the model of the computer. If the printer
cable compatible with your computer is unknown, please ask the store where you purchased
your computer.
2
Remove the cover of connector portion
located on the right-rear side of the printer
body.
located on the right-rear side of the printer
body.
5
Connect the other end of the printer cable to
the parallel port of your computer.
the parallel port of your computer.
25
Prepar
ing f
or AR-
P15 Setup
The following describes how to connect the printer to a network.
PREPARATION:
The 10BASE-T or 100BASE-TX cable is an optional item. Please obtain one that is compatible
with your computer.
1
Turn OFF the power of the printer.
3
Insert the 10BASE-T or 100BASE-TX cable in
the connector.
the connector.
Connecting to the Network
2
Remove the cover of connector portion
located on the right-rear side of the printer
body.
located on the right-rear side of the printer
body.
4
Attach the removed cover as before.
26
Click on the first or last page to see other AR-P15 (serv.man3) service manuals if exist.