Sharp AR-P15 (serv.man3) User Manual / Operation Manual ▷ View online
11
Prepar
ing f
or AR-
P15 Setup
Preparing for AR-P15 Setup
12
About Setup and Administration
The AR-P15 provides following tools to configure the AR-P15 network and printer settings:
Touch Panel Display
You can configure the AR-P15 from the Touch Panel Display on the copier. Since WebPage, which is
another tool to set up the AR-P15, is enabled only on the TCP/IP network, setup operation from the
Touch Panel Display is useful when you setting up the AR-P15 for the first time, or when the AR-P15 is
connected to your computer directly using the printer cable.
WebPage
You can also configure the AR-P15 network and printer settings from WebPage, a web-based utility.
WebPage is functionally superior to setting up from Touch Panel Display in some setup. In addition to
that WebPage provides the setup options for AR-P15 same as the Touch Panel Display, WebPage
provides setting options that cannot be set up from the Touch Panel Display.
:
You can also configure the AR-P15 network and printer settings from Command WorkStation
which is an optional software for the PS3 Scan & HDD Upgrade (AR-PK3+AR-SB1). For
further details about Command WorkStation, see
Fiery Utilites Guide in the User
Documentation CD-ROM.
Administrators can perform following AR-P15 setup from the Touch Panel Display and WebPage:
• Port Setup to specify Ethernet and parallel port settings.
P42 “Setting up the Port Options”
• Protocol Setup to specify the network protocols and print services for the active network systems
that will transmit print jobs to the AR-P15.
P46 “Setting up the Protocols”
• Printer Setup to specify default settings for printing, finishing options, emulation of the printer, PCL
options, and PostScript options.
P68 “Setting up the Printer Setup Options”
• WebPage Setup to specify system options.
P94 “Setting up the WebPage Setup Options”
13
Prepar
ing f
or AR-
P15 Setup
Easy Setup Flow
This chapter describes the minimum setup flow to configure the AR-P15 to use for printing.
Setup Flow for Windows Environments
For Parallel Printing
Step 1
: Connecting the AR-P15 to the parallel port.
P24 “Connecting to the Parallel Port”
Step 2
: Installing the printer driver for parallel printing.
Refer to
User’s Guide.
For SMB Printing
Step 1
: Connecting the AR-P15 to the network.
P25 “Connecting to the Network”
Step 2
: Setting up the TCP/IP to enable WebPage.
P46 “Setting up the TCP/IP Options”
Step 3
: Setting up the Windows Printing Service.
P59 “Setting up the Windows Printing Service”
Step 4
: Installing the printer driver for SMB printing.
Refer to
User’s Guide.
For LPR Printing
Step 1
: Connecting the AR-P15 to the network.
P25 “Connecting to the Network”
Step 2
: Setting up the TCP/IP to enable WebPage.
P46 “Setting up the TCP/IP Options”
Step 3
: Setting up the LPD Printing Service.
P63 “Setting up the LPD Printing Service”
Step 4
: Installing the printer driver for LPR printing.
Refer to
User’s Guide.
14
For IPP Printing
Step 1
: Connecting the AR-P15 to the network.
P25 “Connecting to the Network”
Step 2
: Setting up the TCP/IP to enable WebPage.
P46 “Setting up the TCP/IP Options”
Step 3
: Installing the printer driver for IPP printing.
Refer to
User’s Guide.
For Novell Printing
Step 1
: Connecting the AR-P15 to the network.
P25 “Connecting to the Network”
Step 2
: Configuring NetWare server for AR-P15 printing.
P33 “NetWare Servers Setup”
Step 3
: Setting up the TCP/IP to enable WebPage.
P46 “Setting up the TCP/IP Options”
Step 4
: Setting up the IPX/SPX protocol (if the NetWare server is connected to the IPX/SPX network).
P50 “Setting up the IPX/SPX Options”
Step 5
: Setting up the NetWare Printing Service.
P54 “Setting up the NetWare Options”
Step 6
: Installing the printer driver for Novell printing.
Refer to
User’s Guide.
Click on the first or last page to see other AR-P15 (serv.man3) service manuals if exist.