Sharp AR-NC3D (serv.man25) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 002.doc
Page: 4 of 7
To use the IPX Peer to Peer connection, create a logical printer using the Add Printer Wizard
according to the instructions for your printer.
according to the instructions for your printer.
Procedure:
1. Start Windows 95.
2. From the Start menu go to Settings and then Printers.
3. In the Printers dialog box, double-click on Add Printer:
1. Start Windows 95.
2. From the Start menu go to Settings and then Printers.
3. In the Printers dialog box, double-click on Add Printer:
4. The Add Printer Wizard will appear, to begin installing a new printer, click Next:
5. Select Local Printer and click Next:
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 002.doc
Page: 5 of 7
6. Select Have Disk to install the Sharp AR-PB2 printer driver software from disk:
7. Insert the Sharp AR-PB2 print driver disk in the floppy drive and click OK:
8. Select the print driver to be installed and click Next. The following will be displayed for the PCL
print driver:
9. The following will be displayed for the PostScript driver:
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 002.doc
Page: 6 of 7
Note: If prompted to keep existing driver, do so by clicking Next:
10.
Once the redirector is installed, each printer on the network that supports this peer-to-peer
capability will appear as a Port under Printer Properties. Select the Printer and click Next:
capability will appear as a Port under Printer Properties. Select the Printer and click Next:
10. Accept the default name for the printer or change as appropriate and click Next:
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 002.doc
Page: 7 of 7
12. Print a test page by clicking on
Finish:
13.
Confirm to Windows that the test page printed properly by clicking Yes:
14. After successful completion of a new printer installation, the new printer will be displayed as
an icon in the Printers dialog box:
Installation of a print driver is now complete, return to step 3 of the Installation of the Print Driver
section to add additional drivers.
section to add additional drivers.
Display