Sharp AR-NC3D (serv.man5) FAQ ▷ View online
FIRMWARE VERSION HISTORY (AR-NC3D)
NETWORK CARD FIRMWARE VERSION HISTORY
AR-NC3D Ethernet Card
Version
Revision / Correction Made
5.46
Production level version.
5.55
To support AR-PB2A release & fix a number of bugs.
5.59
To correct the network card appearing to "Hang", due to LPR congestion.
5.67
(1) Enable operation with the IP/Mask settings in the CIDR environment. (Change in specifications),
(2) Enable the “255” setting in the IP from NIC Web. (Change in specifications),
(3) Correct the defective condition in which the DHCP +Boot P does not operate in the NT & UNIX environments,
(4) Includes addition of Secure IP feature (5) Overcomes dropping off Netware Queue based networks & sub-netting issues.
(2) Enable the “255” setting in the IP from NIC Web. (Change in specifications),
(3) Correct the defective condition in which the DHCP +Boot P does not operate in the NT & UNIX environments,
(4) Includes addition of Secure IP feature (5) Overcomes dropping off Netware Queue based networks & sub-netting issues.
5.72
Appletalk processing fails when printing large job from Mac G4 machine.
5.72d
Added Port9100 (for AS400 compatibility), TCP/IP address printing restrictions.
5.75a
When Symantec Ghost series application software activates in the network, the data communication in the AR-NC3D, which is
connected to the network, became unstable. This malfunction was corrected.
connected to the network, became unstable. This malfunction was corrected.
APR’03
Display