Sharp AR-M35 / AR-M450 (serv.man12) Service Manual ▷ View online
AR-M350 SIMULATIONS 10-58
<Set values>
<List of set values>
<Set value>
(1 count : 0.5 mm)
Main code 63
63-1
Purpose
Adjustment, setup, operation data output, check
(display, print)
(display, print)
Function (Content)
Used to check the shading correction result.
(The shading correction result is displayed.)
(The shading correction result is displayed.)
Section
Scanner (exposure)
Item
Operation
Operation/Procedure The latest shading data are displayed.
CCD data
Values
Description
ODD GAIN
Pixel gain adjustment value
EVEN GAIN
Pixel gain adjustment value
ODD MAX
Pixel MAX
ODD MIN
Pixel MIN
ODD AVE
Od pixel average
EVEN MAX
Even pixel MAX
EVEN MIN
Even pixel MIN
EVEN AVE
Even pixel average
ODD OFFSET
Black offset
EVEN OFFSET
Even offset
ODD DEV
Odd standard deviation
EVEN DEV
Even standard deviation
CIS data : Only when DSPF installed
Values
Description
GAIN
Gain adjustment value
MAX
Pixel MAX
MIN
Pixel MIN
AVE
Pixel average
OFFSET
Black offset
DEV
Standard deviation
SIMULATION 63-1
SHADING DATA DISPLAY.
(CCD)
ODD GAIN:
SHADING DATA DISPLAY.
(CCD)
ODD GAIN:
ODD OFFSET:
ODD MAX:
ODD MIN.:
ODD AVE.:
ODD DEV.:
EVEN GAIN:
EVEN OFFSET:
EVEN MAX:
EVEN MIN.:
EVEN AVE.:
EVEN DEV.:
(CIS)
GAIN:
GAIN:
OFFSET:
OFFSET:
MIN.:
AVE.:
DEV:
128
255
255
255
128
255
255
255
128
255
2
2
255
0
255
0
255
0
0
63-2
Purpose
Adjustment, setup, operation data output, check
(display, print)
(display, print)
Function (Content)
Used to execute shading.
Section
Scanner (exposure)
Item
Operation
Operation/Procedure Execute shading. During shading,
EXECUTING is displayed.
When shading is completed, COMPLETED is
displayed.
When shading is completed, COMPLETED is
displayed.
1
OC analog data correction and shading correction data making
2
DSPF analog level correction and shading correction data
making
making
3
Execution of CCD data taking test
63-7
Purpose
Adjustment
Function (Content)
Used to adjust the white plate scan start position
in shading white correction.
in shading white correction.
Section
Scanner (exposure)
Item
Operation
Operation/Procedure Adjust the white plate scan start position in
shading white correction. Enter the adjustment
value and press START to store it.
value and press START to store it.
Initial value
Range
1
CCD scan
6
1-16
SIMULATION 63-2
SHADING EXECUTION.SELECT1-3, AND PRESS START.
1. OC SHADING
2. DSPF SHADING
3. CCD TEST SHADING
SHADING EXECUTION.SELECT1-3, AND PRESS START.
1. OC SHADING
2. DSPF SHADING
3. CCD TEST SHADING
1
1
1
SIMULATION 63-2
SHADING EXECUTING...
1. OC SHADING
SHADING EXECUTING...
1. OC SHADING
SIMULATION 63-2
SHADING COMPLETED.
1. OC SHADING
SHADING COMPLETED.
1. OC SHADING
Press [START] key.
After completion
Press [CUSTOM SETTING] key to stop.
SIMULATION 63-7
SHADING POSITION ADJUSTMENT. PRESS START.
1. CCD
SHADING POSITION ADJUSTMENT. PRESS START.
1. CCD
1
0
SIMULATION 63-7
SHADING POSITION ADJUSTMENT INPUT VALUE 1-16, AND PRESS
START.
1. CCD
SHADING POSITION ADJUSTMENT INPUT VALUE 1-16, AND PRESS
START.
1. CCD
0
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.
*( !" #$%&'
AR-M350 SIMULATIONS 10-59
<List of set values>
<Print pattern>
Main code 64
64-1
Purpose
Operation test, check
Function (Content)
Used to check the operations of the printer
section (self printing).
(The print pattern, paper feed mode, print mode,
print quantity, density can be changed
optionally.)
section (self printing).
(The print pattern, paper feed mode, print mode,
print quantity, density can be changed
optionally.)
Section
Printer
Item
Operation
Operation/Procedure Perform self printing. The current set data is
displayed on the right side of the menu.
SIMULATION 64-1
SELF PRINT MODE. SELECT 0-7, AND PRESS START.
0.TRAY SELECT
SELF PRINT MODE. SELECT 0-7, AND PRESS START.
0.TRAY SELECT
:
1.PRINT START
2.PRINT PATTERN
:
3.DENSITY :
4.MULTI
:
5.MODE
:
6.LEVEL
:
7.DUPLEX :
1
87
1
1
1
1
1
1
1
1
SIMULATION 64-1
SELF PRINT MODE... EXECUTING...
0.TRAY SELECT
SELF PRINT MODE... EXECUTING...
0.TRAY SELECT
:
2.PRINT PATTERN
:
3.DENSITY :
4.MULTI
:
5.MODE
:
6.LEVEL
:
7.DUPLEX :
1
87
1
1
1
1
1
1
1
0
SIMULATION 64-1
SELF PRINT MODE. SELECT 1-8, AND PRESS START.
(MODE)
1.STANDARD
SELF PRINT MODE. SELECT 1-8, AND PRESS START.
(MODE)
1.STANDARD
2.SMOOTHING
3.TONER SAVE 4.HALF TONE
5.SMOOTHING+ TONER SAVE
6.SMOOTHING+ HALF TONE
7.TONER SAVE+ HALF TONE
8. SMOOTHING+ TONER SAVE+ HALF TONE
8. SMOOTHING+ TONER SAVE+ HALF TONE
1
SIMULATION 64-1
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(PRINT PATTERN)
INPUT 50-99.
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(PRINT PATTERN)
INPUT 50-99.
87
(2)
SIMULATION 64-1
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(DENSITY)
1-255
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(DENSITY)
1-255
100
(3)
SIMULATION 64-1
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(MULTI COUNT)
1-999
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(MULTI COUNT)
1-999
1
(4)
SIMULATION 64-1
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(LEVEL)
1-5
SELF PRINT MODE. INPUT VALUE, AND PRESS START.
(LEVEL)
1-5
3
(6)
(5)
SIMULATION 64-1
SELF PRINT MODE. SELECT 1-5, AND PRESS START.
(FEED TRAY)
1.TRAY1
SELF PRINT MODE. SELECT 1-5, AND PRESS START.
(FEED TRAY)
1.TRAY1
2.TRAY2 3.TRAY3 4.TRAY4 5. BPT
1
(0)
SIMULATION 64-1
SELF PRINT MODE. SELECT 1-2, AND PRESS START.
(DUPLEX)
1.NO
SELF PRINT MODE. SELECT 1-2, AND PRESS START.
(DUPLEX)
1.NO
2.YES
1
(7)
Press [CUSTOM SETTING] key
or [START] key.
Select 1, and
press [START] key.
press [START] key.
0 Paper feed tray
1: TRAY1
2: TRAY2
3: TRAY3
4: TRAY4:
5: MANUAL
2: TRAY2
3: TRAY3
4: TRAY4:
5: MANUAL
1 Print execution
Print is started with the set data.
2 Print pattern
Refer to the print pattern.
3 Picture density
Enable only when No. 79, 80, or 84 is selected.
4 Print quantity
-
5 Print mode
1: Standard
2: Smoothing ON
3: Toner save ON
4: Half tone ON
5: Smoothing + Toner save
6: Smoothing + Half tone
7: Toner save + half tone
8: Smoothing + Toner save + Half tone
2: Smoothing ON
3: Toner save ON
4: Half tone ON
5: Smoothing + Toner save
6: Smoothing + Half tone
7: Toner save + half tone
8: Smoothing + Toner save + Half tone
6 Print level
1 ~ 5
7 Duplex
1: Single print
2: Duplex print
2: Duplex print
50 Total surface 1BY1 (Vertical) 70 Scaled print adjustment pattern
(Vertical)
51 Total surface 1BY1
(Horizontal)
71 Grid pattern
52 Total surface 1BY2 (Vertical) 72 Slant line 45 degrees
53 Total surface 1BY2
53 Total surface 1BY2
(Horizontal)
73 Slant line 26.6 degrees
54 Total surface 1BY3 (Vertical) 74 Slant line 63.4 degrees
55 Total surface 1BY3
55 Total surface 1BY3
(Horizontal)
75 ID-BG pattern
56 Total surface 1BY4 (Vertical) 76 Dot pattern 12.5%
57 Total surface 1BY4
57 Total surface 1BY4
(Horizontal)
77 Dot pattern 28%
58 Total surface 1BY5 (Vertical) 78 Dot pattern 50%
59 Total surface 1BY5
59 Total surface 1BY5
(Horizontal)
79 Whole surface error diffusion
background
60 Total surface 2BY2 (Vertical) 70 Whole surface dither process
background
61 Total surface 2BY2
(Horizontal)
81 1 block 128 pixels/
every 32 gradations
62 Total surface 2BY3 (Vertical) 82 1 block 128 pixels/
every 16 gradations
63 Total surface 2BY3
(Horizontal)
83 1 block 128 pixels/
every 8 gradations
64 Whole surface background
copy
84 Memory check pattern
65 Special pattern (Vertical)
85 Cleaning check pattern
66 1 block 128 pixels/
every 32 gradations
86 Offset check pattern
67 1 block 128 pixels/
every 16 gradations
87 Test B image (for aging)
68 1 block 128 pixels/
every 8 gradations
88 Printer 6%
69 11-do t pattern
89 Printer 5%
98 List of setup values
98 List of setup values
*) !" #$%&'
AR-M350 SIMULATIONS 10-60
*
SIM 1 cannot be changed with this simulation.
Main code 65
65-1
Purpose
Adjustment
Function (Content)
Used to adjust the touch panel
(LCD display section) detecting position.
(LCD display section) detecting position.
Section
Operation (display, operation)
Item
Operation/Procedure Adjust the coordinates of the touch panel.
Operation/Procedure Adjust the coordinates of the touch panel.
Press the four cross marks on the LCD, and the
pressed mark will turn gray. When all four marks
are pressed, the adjustment is completed.
pressed mark will turn gray. When all four marks
are pressed, the adjustment is completed.
65-2
Purpose
Adjustment, setup, operation data output, check
(display, print)
(display, print)
Function (Content)
Used to check the result of the touch panel
(LCD display section) detecting position
adjustment. (The coordinates are displayed.)
(LCD display section) detecting position
adjustment. (The coordinates are displayed.)
Section
Operation (display, operation)
Item
Operation/Procedure Check the touch panel. When the touch panel is
Operation/Procedure Check the touch panel. When the touch panel is
pressed, the coordinates (dot conversion values)
in X/Y directions are displayed.
in X/Y directions are displayed.
SIMULATION 65-1
SIMULATION 65-2
600
200
X:
Y:
400
500
600
40
100
200
300
100
140
180
Main code 66
66-1
Purpose
Setup
Function (Content)
Used to set the FAX soft switch function.
(Used to utilize the FAX soft switch function.)
(Used to utilize the FAX soft switch function.)
Section
Fax
Item
Operation/Procedure Set the Fax soft switch.
Operation/Procedure Set the Fax soft switch.
(For details of the soft SW, refer to the AR-FX5
Service Manual.)
Entry of 1 - 8 only is effective.
1) Specify the bit to be changed (highlighted)
Service Manual.)
Entry of 1 - 8 only is effective.
1) Specify the bit to be changed (highlighted)
with a number.
2) Press START to rewrite the setting.
1
SIMULATION 66-1
FAX SOFT SW. SETTING. INPUT DATA No(1-8), AND PRESS START.
SOFT SW-2:
FAX SOFT SW. SETTING. INPUT DATA No(1-8), AND PRESS START.
SOFT SW-2:
00001001
SIMULATION 66-1
FAX SOFT SW. SELECT 2 - 80, AND PRESS START.
FAX SOFT SW. SELECT 2 - 80, AND PRESS START.
1 2 3 4 5 6 7 8
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.
, !" #$%&'
AR-M350 SIMULATIONS 10-61
<Country codes>
*
The codes other than the above are recognized as Japan.
*
Conforms to Advisory Document T.35.
<List of display values>
<Items>
66-2
Purpose
Data clear
Function (Content)
Used to set the FAX soft switch setup to the
default. (Except for the adjustment values)
default. (Except for the adjustment values)
Section
Fax
Item
Data
Operation/Procedure The current set value of SW1 is displayed.
Entry of 1 - 8 only is effective.
1) Specify the bit to be changed (highlighted)
1) Specify the bit to be changed (highlighted)
with a number.
2) Select the country code, and press START to
rewrite the setting.
3) Select a number (1 - 2) with 10 digit key pad
and press START to execute.
1: FAX soft SW clear 2: Not clear
4) The soft switch (excluding the FAX adjustment
value) corresponding to the selected country
code is cleared.
code is cleared.
5) The selected country is highlighted.
Japan
0
U.S.A.
10110101
Australia
1001
U.K
10110100
France
111101
Germany
100
Canada
100000
Netherlands
1111011
1
JAPAN
SIMULATION 66-2
FAX SOFT SW. CLEAR.
ARE YOU SURE?
FAX SOFT SW. CLEAR.
ARE YOU SURE?
1:YES
2:NO
2:NO
00000000
SIMULATION 66-2
FAX SOFT SW.CLEAR (WIHTOUT ADJUSTMENT VALUE).
INPUT COUNTRY CODE, AND PRESS START.
FAX SOFT SW.CLEAR (WIHTOUT ADJUSTMENT VALUE).
INPUT COUNTRY CODE, AND PRESS START.
1 2 3 4 5 6 7 8
Press [START] key.
66-3
Purpose
Operation test, check
Function (Content)
Used to check the operations of FAX PWB
memory (read/write).
(This adjustment is required when replacing the
PWB with a new one.)
memory (read/write).
(This adjustment is required when replacing the
PWB with a new one.)
Section
Fax
Item
Data
Operation/Procedure Check the FAX PWB memory.
When this simulation is executed, the error
occurring address or the data line is displayed.
occurring address or the data line is displayed.
NO CHECK
Not checked
CHECKING
Checking
OK
Check complete OK
NG
Check error
MFP SRAM (MFP control PWB)
SRAM
MFP FLASH (FAX I/F PWB)
FLASH Memory (AR-MM9)
MFP OP.FLASH (FAX I/F PWB)
MODEM EEPROM (FAX PWB)
MODEM SRAM(G/A) (FAX PWB)
MODEM SRAM (FAX PWB)
MODEM SDRAM (FAX PWB)
MODEM EEPROM (FAX PWB)
MODEM SRAM(G/A) (FAX PWB)
MODEM SRAM (FAX PWB)
MODEM SDRAM (FAX PWB)
SIMULATION 66-3
FAX PWB MEMORY CHECK.
MFP SRAM: CHECKING
MFP FLASH: NO CHECK
MFP OP. FLASH: NO CHECK
MODEM EEPROM: NG:A0010000
MODEM SRAM(G/A):NO CHECK
MODEM SRAM: NG A11
MODEM SDRAM: OK
FAX PWB MEMORY CHECK.
MFP SRAM: CHECKING
MFP FLASH: NO CHECK
MFP OP. FLASH: NO CHECK
MODEM EEPROM: NG:A0010000
MODEM SRAM(G/A):NO CHECK
MODEM SRAM: NG A11
MODEM SDRAM: OK
, !" #$%&'
Click on the first or last page to see other AR-M35 / AR-M450 (serv.man12) service manuals if exist.