Sharp AR-M256 (serv.man18) User Manual / Operation Manual ▷ View online
44
CONVENIENT COPY FUNCTIONS
PAMPHLET COPY
The pamphlet copy function is used to arrange copies in the proper order for centre-stapling and folding into a
booklet. Two original pages are copied onto each side of the copy paper, such that a total of four pages are copied
onto each sheet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
booklet. Two original pages are copied onto each side of the copy paper, such that a total of four pages are copied
onto each sheet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
[Example]: Copying 8 originals with pamphlet copy
• Scan the originals in order from the first page to the
last page. The order of copying will be automatically
adjusted by the machine.
adjusted by the machine.
• Either left binding (opening from right to left) or right
binding (opening from left to right) can be selected.
• Four originals will be copied onto one sheet. Blank
pages may be automatically added at the end,
depending on the number of the originals.
depending on the number of the originals.
1
Touch the [PAMPHLET COPY] key in
the special modes menu screen.
the special modes menu screen.
The pamphlet copy
setting screen will
appear. The pamphlet
copy icon (
setting screen will
appear. The pamphlet
copy icon (
, etc.) will
also appear in the upper
left corner of the screen
to indicate that the
function is enabled.
left corner of the screen
to indicate that the
function is enabled.
2
Specify whether 1-sided or 2-sided
originals will be copied.
originals will be copied.
3
Select the binding position ([LEFT
BINDING] or [RIGHT BINDING]) and
then touch the [OK] key in the
pamphlet copy setting screen.
BINDING] or [RIGHT BINDING]) and
then touch the [OK] key in the
pamphlet copy setting screen.
You will return to the
special modes menu
screen.
special modes menu
screen.
4
Touch the [OK] key in the special
modes screen.
modes screen.
You will return to the main screen of copy mode.
5
Place the original(s). (p.22, p.23)
6
Make sure that a suitable paper size
has been automatically selected.
has been automatically selected.
If the desired copy paper
size is not selected, use
the [PAPER SELECT] key
to select the paper size.
After the paper size is
selected, touch the [AUTO
IMAGE] key. A suitable
ratio will be automatically
selected.
size is not selected, use
the [PAPER SELECT] key
to select the paper size.
After the paper size is
selected, touch the [AUTO
IMAGE] key. A suitable
ratio will be automatically
selected.
7
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
other desired copy settings, and then
press the [START] key (
).
8
[When using the RSPF:]
Copying will start after all originals have been
scanned.
scanned.
9
[When using the document glass:]
Replace the original with the next original and
press the [START] key (
press the [START] key (
). Repeat this step
until all originals have been scanned, and then
touch the [READ-END] key.
touch the [READ-END] key.
1
2
3
4
5
6
7
8
7
8
5
6
3
4
1
2
Originals (two-sided)
Originals (one-sided)
First page
First page
The finished copies
can be folded.
can be folded.
MARGIN SHIFT
PAMPHLET COPY
CANCEL
OK
PAMPHLET COPY
ORIGINAL
2-SIDED
1-SIDED
RIGHT
BINDING
LEFT
BINDING
CANCEL
OK
D
RIGHT
BINDING
LEFT
BINDING
When the pamphlet copy function is selected,
two-sided copying will be automatically enabled.
two-sided copying will be automatically enabled.
To cancel the pamphlet copy function, touch
the [CANCEL] key in the pamphlet copy
setting screen. (See the screen of step 2.)
the [CANCEL] key in the pamphlet copy
setting screen. (See the screen of step 2.)
PAPER SELECT
AUTO A4
100%
Note
ar_m318_uk_cpy.book 44 ページ 2007年1月15日 月曜日 午前11時36分
45
CONVENIENT COPY FUNCTIONS
3
JOB BUILD MODE
Use this function when you need to copy more originals than can be placed in the RSPF at once. (The maximum
number of originals that can be placed in the RSPF at once is 100.)
number of originals that can be placed in the RSPF at once is 100.)
Example: Copying 130 sheets (A4 (8-1/2" x 11") size originals)
1
Touch the [JOB BUILD] key in the
special modes menu screen.
special modes menu screen.
The [JOB BUILD] key is
highlighted.
The job build copy icon
(
highlighted.
The job build copy icon
(
) will also appear in
the screen to indicate
that the function is
enabled.
that the function is
enabled.
2
Touch the [OK] key in the special
modes screen.
modes screen.
You will return to the
main screen of copy
mode.
main screen of copy
mode.
3
Place the original(s) in the RSPF.
(p.23)
(p.23)
4
Make sure that a suitable paper size is
selected, select the number of copies
and any other desired copy settings,
and then press the [START] key (
selected, select the number of copies
and any other desired copy settings,
and then press the [START] key (
) .
Scanning begins. When
scanning of the first set
of originals (A in the
above example) is
finished, insert the
second set and press the
[START] key (
scanning of the first set
of originals (A in the
above example) is
finished, insert the
second set and press the
[START] key (
).
Repeat this step until all the remaining originals (B in
the above example) have been scanned.
Remove each scanned set of originals before inserting
the next set.
the above example) have been scanned.
Remove each scanned set of originals before inserting
the next set.
5
Touch the [READ-END] key.
Copying begins.
• If the memory becomes full while scanning the originals, "MEMORY IS FULL. PRESS [START] TO BEGIN
COPYING OR [CA] TO CANCEL." will appear. To copy only the originals that have been scanned, press the
[START] key (
[START] key (
) . To cancel the job, press the [CLEAR ALL] key (
).
• Depending on the content of the originals, the memory may become full before 100 originals have been scanned. In
this case, press the [START] key (
) to copy the originals that have been scanned, and then place the originals
that weren’t scanned in the RSPF once again and repeat the copy procedure.
• To increase the number of originals that can be scanned, install more memory or increase the memory
allocation in the key operator programs. (See the "Key operator’s guide".)
Note
Originals
*
Divide the originals into sets so that each set is no more than
100 pages. Scan the sets in order beginning from the first
page of set A.
100 pages. Scan the sets in order beginning from the first
page of set A.
100 sheets
30 sheets
page 1
page 101
ERASE
T
Y
MUL
ERASE
JOB
BUILD
D
JOB
BUILD
MULTI SHOT
ERASE
1/2
OK
JOB
BUILD
DUAL PAGE
COPY
To cancel the job build mode function, touch
the [JOB BUILD] key in the special modes
screen so that it is no longer highlighted.
(See the screen of step 1.)
the [JOB BUILD] key in the special modes
screen so that it is no longer highlighted.
(See the screen of step 1.)
ACC.#-C
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
Note
ar_m318_uk_cpy.book 45 ページ 2007年1月15日 月曜日 午前11時36分
46
CONVENIENT COPY FUNCTIONS
MULTI SHOT COPY
The multi shot copy function is used to copy two or four originals onto one sheet of copy paper in a specified order.
Example: Copying four originals onto one sheet of paper
(Page number: 4 in 1 (
(Page number: 4 in 1 (
), layout: (
))
• When using the multi shot copy function, place the
originals, select the desired paper size, and select
the copy mode before selecting the multi shot copy
function in the special modes screen.
the copy mode before selecting the multi shot copy
function in the special modes screen.
• When using the multi shot copy function, the
appropriate copy ratio will be automatically set based
on the original size, paper size, and the number of
originals to be copied onto one sheet. The minimum
reduction ratio is 25%. (The minimum ratio is 50% when
the RSPF is used.) Depending on the original size,
paper size, and the number of originals to be copied
onto one sheet, portions of original images may be cut
off.
on the original size, paper size, and the number of
originals to be copied onto one sheet. The minimum
reduction ratio is 25%. (The minimum ratio is 50% when
the RSPF is used.) Depending on the original size,
paper size, and the number of originals to be copied
onto one sheet, portions of original images may be cut
off.
1
Touch the [MULTI SHOT] key in the
SPECIAL MODES menu screen.
SPECIAL MODES menu screen.
The multi shot copy
setting screen will
appear. The multi shot
copy icon (
setting screen will
appear. The multi shot
copy icon (
, etc.) will
also appear in the screen
to indicate that the
function is enabled.
to indicate that the
function is enabled.
2
Select the number of originals to be
copied onto one sheet in the multi
shot copy selection screen.
copied onto one sheet in the multi
shot copy selection screen.
3
Select the layout.
Select the order in which
the originals will appear
on the copy.
the originals will appear
on the copy.
4
Select a borderline setting.
Select [
], [
], or
[
].
5
Touch the [OK] key in the multi shot
setting screen.
setting screen.
You will return to the special modes menu screen.
6
Touch the [OK] key in the special
modes menu screen.
modes menu screen.
You will return to the main screen of copy mode.
7
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
other desired copy settings, and then
press the [START] key (
).
8
[When using the RSPF:]
Copying will start after all originals have been
scanned.
scanned.
9
[When using the document glass:]
Replace the original with the next original and
press the [START] key (
press the [START] key (
). Repeat this step
until all originals have been scanned, and then
touch the [READ-END] key if necessary.
touch the [READ-END] key if necessary.
One-sided copy of
one-sided original
one-sided original
Copy
One-sided copy of
two-sided original
two-sided original
MULTI SHOT
1/2
DUAL PAGE
COPY
SPECIAL MODES
MULTI SHOT
OK
OK
CANCEL
LAYOUT
2in1
4in1
BORDER
OK
CANCEL
LAYOUT
BORDER
• The images may be rotated depending on
the number of originals and the orientation
of the originals and copy paper.
of the originals and copy paper.
• To cancel the multi shot copy function,
touch the [CANCEL] key in the multi shot
setting screen (the screen of step 2) .
setting screen (the screen of step 2) .
OK
CANCEL
LAYOUT
BORDER
Note
ar_m318_uk_cpy.book 46 ページ 2007年1月15日 月曜日 午前11時36分
47
CONVENIENT COPY FUNCTIONS
3
ORIGINAL SIZE
If you wish to use the paper other than the automatically selected original size, original size setting is specified by
the special modes. The mix feeding setting (p.25) is also selected here.
the special modes. The mix feeding setting (p.25) is also selected here.
1
Touch the
key and then touch the
[ORIGINAL SIZE] key in the special
modes menu screen.
modes menu screen.
The original size setting
screen will appear.
screen will appear.
2
Touch the [MANUAL] key.
3
Select the original size.
[MANUAL] key is highlighted and the selected paper
size is displayed.
size is displayed.
4
Touch the inside [OK] key.
You will return to the special modes menu
screen.
screen.
5
Touch the [OK] key in the special
modes menu screen.
modes menu screen.
You will return to the main screen of the copy
mode.
mode.
To select an inch size original, touch the
[AB
[AB
INCH] key. Inch sizes will appear.
ORIGINAL
SIZE
CARD SHOT
COV
AL MODES
MANUAL
GINAL SIZE
AUTO
MIX SIZE ORIGINAL FEEDING MOD
OK
INCH
AB
OK
AUTO
MANUAL
ORIGINAL SIZE
A5
A4
A4R
B4
A3
Note
To select mixed feeding, select the "MIX SIZE
ORIGINAL FEEDING MODE" checkbox.
Mixed feeding is explained on page 25.
ORIGINAL FEEDING MODE" checkbox.
Mixed feeding is explained on page 25.
Note
ar_m318_uk_cpy.book 47 ページ 2007年1月15日 月曜日 午前11時36分
Click on the first or last page to see other AR-M256 (serv.man18) service manuals if exist.