Sharp AR-M256 (serv.man18) User Manual / Operation Manual ▷ View online
27
2
AUTOMATIC TWO-SIDED COPYING
Two originals can be automatically copied onto both sides of a single sheet of paper. When the RSPF is used,
two-sided copies of two-sided originals can easily be made.
two-sided copies of two-sided originals can easily be made.
USING THE DOCUMENT GLASS
1
Place the original on the document
glass. (p.22)
glass. (p.22)
2
Touch the [2-SIDED COPY] key.
3
Touch the [One-sided to two-sided
copy] key.
copy] key.
4
Touch the [OK] key.
Original
→ Paper
Document glass
One-sided original
→
Two sides (
)
RSPF
One-sided original
→
Two sides
(
)
Two-sided original
→
Two sides
(
)
Two-sided original
→
One side
(
)
• Paper sizes that can be used are A5, B5, B5R, A4, A4R, B4, and A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13",
8-1/2" x 14" and 11" x 17").
• When making two-sided copies on letterhead paper, place the side with the letterhead face down if using a
tray, or face up if using the bypass tray (This is the opposite of normal.).
• Automatic two-sided copying is not possible on thick paper, thin paper, labels, transparency film, envelopes, and
other special types of paper.
• Automatic two-sided copying can be disabled in the key operator programs. (See the "Key operator’s guide".)
• When dual page copy (p.43) is selected, two-sided original to two sides or two-sided original to one side cannot be used.
• When dual page copy (p.43) is selected, two-sided original to two sides or two-sided original to one side cannot be used.
Note
OUTPUT
2-SIDED COPY
Portrait-oriented original
(A3 or B4 (11" x 17" or 8-1/2" x 14") size)
Before [BINDING CHANGE]
After [BINDING CHANGE]
Touch the [BINDING CHANGE] key when making the tablet
binding, or when making automatic two-sided copies of a
one-sided A3 or B4 (11" x 17" or 8-1/2" x 14") size portrait
original, touch the [BINDING CHANGE] key.
binding, or when making automatic two-sided copies of a
one-sided A3 or B4 (11" x 17" or 8-1/2" x 14") size portrait
original, touch the [BINDING CHANGE] key.
BINDING
CHANGE
OK
ar_m318_uk_cpy.book 27 ページ 2007年1月15日 月曜日 午前11時36分
28
COPY FUNCTIONS
5
Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
automatically selected, or select
another size using the [PAPER
SELECT] key.
6
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
other desired copy settings, and then
press the [START] key (
).
The original for the front
side is scanned.
side is scanned.
7
Remove the first original and then place
the original for the back side on the
document glass. Close the document
cover/RSPF and then press the [START]
key (
the original for the back side on the
document glass. Close the document
cover/RSPF and then press the [START]
key (
).
To cancel automatic
two-sided copying, press
the [CLEAR] key (
two-sided copying, press
the [CLEAR] key (
).
USING THE RSPF
1
Place the original(s) in the document
feeder tray. (p.23)
feeder tray. (p.23)
2
Touch the [2-SIDED COPY] key.
3
Touch the desired copy mode.
4
Touch the [OK] key.
5
Make sure that a suitable paper size is
automatically selected, or select
another size using the [PAPER
SELECT] key.
automatically selected, or select
another size using the [PAPER
SELECT] key.
6
Select the number of copies and any
other desired copy settings, and then
press the [START] key (
other desired copy settings, and then
press the [START] key (
).
EXPOSURE
AUTO A4
PAPER SELECT
100%
ACC.#-C
When making two-sided copies of an odd
number of originals, touch the [READ-END]
key after scanning the last original.
number of originals, touch the [READ-END]
key after scanning the last original.
Note
OUTPUT
2-SIDED COPY
D COPY
BIN
CH
Y TO COPY.
Portrait-oriented original
(A3 or B4 (11" x 17" or 8-1/2" x 14") size)
Before [BINDING CHANGE]
After [BINDING CHANGE]
Touch the [BINDING CHANGE] key when making the
tablet binding, or when making automatic two-sided copies
of a one-sided A3 or B4 (11" x 17" or 8-1/2" x 14") size
portrait original, touch the [BINDING CHANGE] key.
tablet binding, or when making automatic two-sided copies
of a one-sided A3 or B4 (11" x 17" or 8-1/2" x 14") size
portrait original, touch the [BINDING CHANGE] key.
BINDING
CHANGE
OK
EXPOSURE
AUTO A4
PAPER SELECT
100%
ACC.#-C
ar_m318_uk_cpy.book 28 ページ 2007年1月15日 月曜日 午前11時36分
29
2
EXPOSURE ADJUSTMENT
SELECTING THE ORIGINAL IMAGE TYPE AND
MANUALLY ADJUSTING THE EXPOSURE
MANUALLY ADJUSTING THE EXPOSURE
[AUTO] is selected by default for automatic adjustment of the image according to the original. If you wish to specify
the original image type or manually adjust the exposure, place the original in the RSPF or on the document glass,
check the paper size, and then perform the following steps.
the original image type or manually adjust the exposure, place the original in the RSPF or on the document glass,
check the paper size, and then perform the following steps.
1
Touch the [EXPOSURE] key.
2
Select [TEXT], [TEXT/PHOTO], or
[PHOTO] as appropriate for the
original.
[PHOTO] as appropriate for the
original.
Selecting the original image type
• Four original image type selections are available.
• Automatic exposure adjustment can only be selected
when [TEXT] is selected for the original image type.
3
Manually adjust the copy exposure.
If [TEXT] was selected
for the original image
type, touch the [AUTO
for the original image
type, touch the [AUTO
MANUAL] key to
select [MANUAL] and
then adjust the copy
exposure.
then adjust the copy
exposure.
Touch the
key to make darker copies.
Touch the
key to make lighter copies.
To change back to automatic exposure adjustment,
follow these steps:
1 Touch the [EXPOSURE] key.
2 Touch the [TEXT] key.
follow these steps:
1 Touch the [EXPOSURE] key.
2 Touch the [TEXT] key.
The [AUTO
MANUAL] key appears when [TEXT]
is selected.
3 Touch the [AUTO
MANUAL] key so that
[AUTO] is highlighted.
4 Touch the [OK] key.
4
Touch the [OK] key.
You will return to the main screen of copy mode.
5
Check the paper size, select the
number of copies and any other
desired copy settings, and then press
the [START] key (
number of copies and any other
desired copy settings, and then press
the [START] key (
).
6
TEXT
Use for regular text, blueprints,
and light pencil writing.
and light pencil writing.
TEXT/PHOTO
Use for mixed text/photo originals
and printed photos.
and printed photos.
PHOTO
Use for photos and when you
desire clearer halftones.
desire clearer halftones.
AUTO
EXPOSURE
AUTO A4
PAPER SELECT
AUTO
ORIGINAL IMAGE TYPE
PHOTO
TEXT/PHOTO
TEXT
1
3
Exposure value guidelines
1 - 2 Dark originals like newspapers
3
3
Normal originals
4 - 5 Light coloured text or text written in
pencil
AUTO
MANUAL
1
3
5
Note
ACC.#-C
ar_m318_uk_cpy.book 29 ページ 2007年1月15日 月曜日 午前11時36分
30
REDUCTION/ENLARGEMENT/ZOOM
There are three ways to enlarge and reduce copies:
● Automatic ratio selection according to the paper size ........................... AUTOMATIC RATIO SELECTION (below)
● Automatic ratio selection according to the paper size ........................... AUTOMATIC RATIO SELECTION (below)
● Specifying a ratio with the reduce key, enlarge key, or zoom key..................MANUAL RATIO SELECTION (p.31)
● Separately selecting vertical and horizontal ratios ........................................................... XY ZOOM copying (p.32)
Ratios that can be selected vary depending on the following conditions:
Ratios that can be selected vary depending on the following conditions:
AUTOMATIC RATIO SELECTION
The ratio is automatically selected based on the original size and paper size.
1
Place the original(s). (p.22, p.23)
The original size appears in the touch panel.
2
Touch the [PAPER SELECT] key and
then select the desired paper size.
then select the desired paper size.
The selected key is
highlighted and the paper
selection screen closes.
highlighted and the paper
selection screen closes.
3
Touch the [AUTO IMAGE] key.
A suitable ratio is
selected based on the
original size and selected
paper size. (The ratio
appears in the touch
panel.)
selected based on the
original size and selected
paper size. (The ratio
appears in the touch
panel.)
4
Select the number of copies and any
other desired settings, and then press
the [START] key (
other desired settings, and then press
the [START] key (
).
Original position
Selectable ratios
Document glass
25 to 400%
RSPF
50 to 200%
• If the original size does not appear in the
touch panel, specify the original size
manually. (p.47)
manually. (p.47)
• Automatic ratio selection is not possible if
the original or paper is a non-standard
size.
size.
If paper of the desired size is not loaded in
any of the trays, load paper of the required
size in a paper tray or in the bypass tray.
(p.19)
any of the trays, load paper of the required
size in a paper tray or in the bypass tray.
(p.19)
Note
A3
A4
PLAIN
RECYCLED
Note
AUTO
IMAGE
AUT
PAPER
1
COPY
• When automatic ratio selection is
selected, the [AUTO IMAGE] key is
highlighted in the main screen.
highlighted in the main screen.
• If the original and paper are in different
orientations, the image is automatically
rotated to match the paper orientation (for
paper sizes A4 (8-1/2" x 11") or less).
rotated to match the paper orientation (for
paper sizes A4 (8-1/2" x 11") or less).
• Rotation of the image can be disabled in
the key operator programs. (See the "Key
operator’s guide".)
operator’s guide".)
• If "IMAGE IS LARGER THAN THE COPY
PAPER." appears in the touch panel, part
of the image will be cut off in the copy.
of the image will be cut off in the copy.
To cancel automatic ratio selection, touch
the [AUTO IMAGE] key. Automatic ratio
selection also turns off automatically when
the enlargement key, the reduction key, or a
[ZOOM] key
the [AUTO IMAGE] key. Automatic ratio
selection also turns off automatically when
the enlargement key, the reduction key, or a
[ZOOM] key
(
/
)
is touched to allow
the ratio to be selected.
Note
ACC.#-C
Note
ar_m318_uk_cpy.book 30 ページ 2007年1月15日 月曜日 午前11時36分
Click on the first or last page to see other AR-M256 (serv.man18) service manuals if exist.