Sharp AR-M256 (serv.man18) User Manual / Operation Manual ▷ View online
39
3
SPECIAL MODES
When the [SPECIAL MODES] key in the main screen of copy mode is touched, the special modes screen will
appear. This screen contains the following special function keys.
appear. This screen contains the following special function keys.
[MARGIN SHIFT] key (p.41)
Use this to shift the image on the copy paper to
create binding margins.
Use this to shift the image on the copy paper to
create binding margins.
[ERASE] key (p.42)
Use this to erase peripheral shadows that occur
when making copies of books and other thick
originals.
Use this to erase peripheral shadows that occur
when making copies of books and other thick
originals.
[DUAL PAGE COPY] key (p.43)
Use this to make separate copies of the left and
right pages of bound documents.
Use this to make separate copies of the left and
right pages of bound documents.
[PAMPHLET COPY] key (p.44)
The pamphlet copy function is used to arrange
copies in the proper order for centre-stapling and
folding into a booklet. Two original pages are
copied onto each side of the paper, such that a
total of four pages are copied onto one sheet.
The pamphlet copy function is used to arrange
copies in the proper order for centre-stapling and
folding into a booklet. Two original pages are
copied onto each side of the paper, such that a
total of four pages are copied onto one sheet.
[JOB BUILD] key (p.45)
Use this when you need to copy more originals
than can be placed in the RSPF at once. This
allows you to divide the originals into sets and
scan them sequentially in the RSPF.
Use this when you need to copy more originals
than can be placed in the RSPF at once. This
allows you to divide the originals into sets and
scan them sequentially in the RSPF.
[MULTI SHOT] key (p.46)
The multi shot copy function is used to copy two or
four originals onto one sheet of copy paper in any
of four layout patterns.
The multi shot copy function is used to copy two or
four originals onto one sheet of copy paper in any
of four layout patterns.
(
) key, (
) key
Use these to change pages in the special functions
screen.
screen.
[ORIGINAL SIZE] key (p.47)
Use to manually select the original size. When the
original size is selected, the auto ratio select
function will automatically select an appropriate
ratio based on the paper size.
Use to manually select the original size. When the
original size is selected, the auto ratio select
function will automatically select an appropriate
ratio based on the paper size.
[COVER] key (p.48)
Press this to use a different type of paper for front
and back covers (When the RSPF is used.).
Press this to use a different type of paper for front
and back covers (When the RSPF is used.).
[CARD SHOT] key (p.50)
The front and reverse sides of a card can be
copied onto one sheet of paper.
The front and reverse sides of a card can be
copied onto one sheet of paper.
[OK] key
Touch to return to the main screen of the copy
mode.
Touch to return to the main screen of the copy
mode.
MULTI SHOT
ERASE
MARGIN SHIFT
PAMPHLET COPY
SPECIAL MODES
1/2
OK
JOB
BUILD
DUAL PAGE
COPY
ORIGINAL
SIZE
CARD SHOT
COVER
SPECIAL MODES
2/2
OK
SPECIAL MODES
2-SIDED COPY
OUTPUT
READY TO COPY.
AUTO
EXPOSURE
AUTO A4
PAPER SELECT
100%
COPY RATIO
A4
A4
ORIGINAL
0
A4
A3
9
11
2
3
4
5
6
10
7
8
1
Touch the [SPECIAL MODES]
key in the main screen
key in the main screen
The displayed menu will vary
depending on the equipment
installed.
installed.
1
2
3
4
5
6
Some functions cannot be used in
combination with each other. If a prohibited
combination of functions has been selected, a
message will appear in the touch panel.
combination with each other. If a prohibited
combination of functions has been selected, a
message will appear in the touch panel.
7
8
9
10
11
Note
ar_m318_uk_cpy.book 39 ページ 2007年1月15日 月曜日 午前11時36分
40
CONVENIENT COPY FUNCTIONS
GENERAL PROCEDURE FOR USING THE SPECIAL
FUNCTIONS
FUNCTIONS
1
Touch the [SPECIAL MODES] key.
2
Touch the key of the desired special
mode.
mode.
Example:
Selecting the margin shift
function
Selecting the margin shift
function
Procedures for modes that require further settings
are explained starting on the next page.
are explained starting on the next page.
SPECIAL MODES
2-SIDED COPY
MARGIN SHIFT
PAMPHLET COPY
ar_m318_uk_cpy.book 40 ページ 2007年1月15日 月曜日 午前11時36分
41
CONVENIENT COPY FUNCTIONS
3
MARGIN SHIFT COPY
The margin shift function is used to automatically shift the text or image on the copy paper approximately 10 mm
(1/2") in its initial setting.
(1/2") in its initial setting.
1
Touch the [MARGIN SHIFT] key in the
special modes screen.
special modes screen.
The margin shift setting
screen will appear.
The margin shift icon
(
screen will appear.
The margin shift icon
(
, etc.) will also
appear in the screen to
indicate that the function
is turned on.
indicate that the function
is turned on.
2
Select the shift direction.
Touch the [RIGHT],
[LEFT], or [DOWN] key.
The selected key will be
highlighted.
[LEFT], or [DOWN] key.
The selected key will be
highlighted.
3
Adjust the shift width as needed and
touch the [OK] key.
touch the [OK] key.
Use the
and
keys
to set the shift width. The
shift width can be set
from 0 mm to 20 mm
increments of 1 mm (0"
to 1" in increments of
1/8").
shift width can be set
from 0 mm to 20 mm
increments of 1 mm (0"
to 1" in increments of
1/8").
4
Touch the [OK] key in the special
modes screen.
modes screen.
You will return to the main screen of copy mode.
Image shifted
to the right
to the right
Image shifted
to the left
to the left
Image shifted
down
down
Margin
Margin
Margin
Margin
One-sided copying
Two-sided copying
Image shifted
to the right
to the right
Margin
Image shifted
to the left
to the left
Margin
Image shifted
down
down
Or
• Right, left or down can be
selected for the shift direction
as shown in the illustration.
as shown in the illustration.
• The shift width (margin) can
be set from 0 mm to 20 mm
increments of 1 mm (0" to 1"
in increments of 1/8").
increments of 1 mm (0" to 1"
in increments of 1/8").
• If [DOWN] key is selected,
set the original(s) so that the
margin to be increased is set
to the rear side of the RSPF
or the document glass.
margin to be increased is set
to the rear side of the RSPF
or the document glass.
MARGIN SHIFT
PAMPHLET COPY
RIGHT
LEFT
DOWN
About the steps that follow
If you are using the document glass, see page 22.
If you are using the RSPF, see page 23.
If you are using the document glass, see page 22.
If you are using the RSPF, see page 23.
• When margin shift is selected, rotation
copying will not function.
• This feature cannot be used with paper that
is not a standard size.
• To cancel the margin shift function, touch
the [CANCEL] key in the margin shift
setting screen. (See the screen of step 3.)
setting screen. (See the screen of step 3.)
SIDE 1
(0 20)
mm
mm
(0 20)
mm
mm
SIDE 2
OK
CANCEL
OK
10
10
Note
ar_m318_uk_cpy.book 41 ページ 2007年1月15日 月曜日 午前11時36分
42
CONVENIENT COPY FUNCTIONS
ERASE COPY
The erase function is used to erase the shadow lines on copies that are produced when copying thick originals or
books. The erase modes that can be selected are shown below. The erase width is initially set to 10 mm (1/2").
books. The erase modes that can be selected are shown below. The erase width is initially set to 10 mm (1/2").
EDGE ERASE
Eliminates shadow lines around the edges of copies
caused when heavy paper or a book is copied.
caused when heavy paper or a book is copied.
CENTRE ERASE
Eliminates shadow lines produced by the bindings of
bound documents.
bound documents.
EDGE + CENTRE ERASE
Eliminates both the shadow lines around the edges of
copies and the shadow at the centre.
copies and the shadow at the centre.
1
Touch the [ERASE] key in the special
modes screen.
modes screen.
The erase setting screen
will appear.
The erase icon (
will appear.
The erase icon (
, etc.)
will also appear in the
screen to indicate that
the function is turned on.
screen to indicate that
the function is turned on.
2
Select the desired erase mode.
Select one of the three
erase modes. The
selected key will be
highlighted.
erase modes. The
selected key will be
highlighted.
3
Adjust the erase width as needed and
touch the [OK] key.
touch the [OK] key.
Use the
and
keys
to adjust the erase width.
The erase width can be
set from 0 mm to 20 mm
increments of 1 mm (0"
to 1" in increments of
1/8").
The erase width can be
set from 0 mm to 20 mm
increments of 1 mm (0"
to 1" in increments of
1/8").
4
Touch the [OK] key in the special
modes screen.
modes screen.
You will return to the main screen of copy mode.
MU
ERASE
FT
PY
JOB
BUILD
ERASE
CENTRE
ERASE
EDGE+CENTRE
ERASE
EDGE
ERASE
EDGE
CANCEL
OK
10
(0 20)
mm
mm
About the steps that follow
If the document glass is being used, see page 22.
If the RSPF is being used, see page 23.
If the document glass is being used, see page 22.
If the RSPF is being used, see page 23.
• This feature cannot be used with
non-standard size originals.
• This feature cannot be selected when
mixed feeding (p.25) is used.
• To cancel the erase copy function, touch the
[CANCEL] key in the erase setting screen.
(See the screen of step 3.)
(See the screen of step 3.)
Note
ar_m318_uk_cpy.book 42 ページ 2007年1月15日 月曜日 午前11時36分
Click on the first or last page to see other AR-M256 (serv.man18) service manuals if exist.