Sharp AR-M256 (serv.man18) User Manual / Operation Manual ▷ View online
47
CONVENIENT COPY FUNCTIONS
3
ORIGINAL SIZE
If you wish to use the paper other than the automatically selected original size, original size setting is specified by
the special modes. The mix feeding setting (p.25) is also selected here.
the special modes. The mix feeding setting (p.25) is also selected here.
1
Touch the
key and then touch the
[ORIGINAL SIZE] key in the special
modes menu screen.
modes menu screen.
The original size setting
screen will appear.
screen will appear.
2
Touch the [MANUAL] key.
3
Select the original size.
[MANUAL] key is highlighted and the selected paper
size is displayed.
size is displayed.
4
Touch the inside [OK] key.
You will return to the special modes menu
screen.
screen.
5
Touch the [OK] key in the special
modes menu screen.
modes menu screen.
You will return to the main screen of the copy
mode.
mode.
To select an inch size original, touch the
[AB
[AB
INCH] key. Inch sizes will appear.
ORIGINAL
SIZE
CARD SHOT
COV
AL MODES
MANUAL
GINAL SIZE
AUTO
MIX SIZE ORIGINAL FEEDING MOD
OK
INCH
AB
OK
AUTO
MANUAL
ORIGINAL SIZE
A5
A4
A4R
B4
A3
Note
To select mixed feeding, select the "MIX SIZE
ORIGINAL FEEDING MODE" checkbox.
Mixed feeding is explained on page 25.
ORIGINAL FEEDING MODE" checkbox.
Mixed feeding is explained on page 25.
Note
ar_m318_uk_cpy.book 47 ページ 2007年1月15日 月曜日 午前11時36分
48
CONVENIENT COPY FUNCTIONS
COVER COPY
Cover copy mode is used to add a cover to the front or back, or both the front and back, of a multipage document.
To use cover copy mode, the RSPF must be used.
To use cover copy mode, the RSPF must be used.
Copying onto a cover
Not copying onto a cover
One-sided originals
Back cover
(no copying)
(no copying)
Front cover
(can copy onto front side)
(can copy onto front side)
One-sided copies
(copying onto a cover)
(copying onto a cover)
Two-sided originals
SHARP
SHARP
Cover original
1
2
3
4
1
2
3
4
3
4
5
1
2
Cover original
SHARP
Back cover
(no copying)
(no copying)
Front cover
(can copy onto front side)
(can copy onto front side)
SHARP
1
2
3
4
5
One-sided originals
Two-sided copies
(copying onto a cover)
(copying onto a cover)
Two-sided originals
2
3
4
1
Cover original
SHARP
Two-sided copies from one-sided or two-sided originals
One-sided copies from one-sided or two-sided originals
1
2
3
4
SHARP
Cover original
2
3
4
1
SHARP
Back cover
(no copying)
(no copying)
Front cover
(can copy onto front side)
(Back side of cover is blank.)
(can copy onto front side)
(Back side of cover is blank.)
• A front cover, back cover, or both a front and a
back cover can be selected.
• You can specify whether or not the front cover is
copied on.
• Copying is not possible on either side of a back
cover.
2
3
4
1
Back cover
Front cover
(not copying onto a cover)
One-sided originals
Two-sided originals
1
2
3
4
1
2
3
4
4
1
2
3
Front cover
One-sided originals
Two-sided originals
1
2
3
4
4
1
2
3
One-sided copies from one-sided or two-sided originals
Two-sided copies from one-sided or two-sided originals
Back cover
One-sided copies
(not copying onto a cover)
(not copying onto a cover)
One-sided copies
(not copying onto a cover)
(not copying onto a cover)
• A front cover, back cover, or both a front and a
back cover can be selected.
ar_m318_uk_cpy.book 48 ページ 2007年1月15日 月曜日 午前11時36分
49
CONVENIENT COPY FUNCTIONS
3
1
Touch the
key and then touch the
[COVER] key in the special modes
menu screen.
menu screen.
The cover setting screen
will appear.
The cover icon (
will appear.
The cover icon (
, etc.)
will also appear in the
screen to indicate that
the function is turned on.
screen to indicate that
the function is turned on.
2
Select the cover(s) that you wish to
add.
add.
To add only a front cover, touch the [FRONT] key. To
add only a back cover, touch the [BACK] key. To add
both a front and back cover, touch the
[FRONT+BACK] key.
add only a back cover, touch the [BACK] key. To add
both a front and back cover, touch the
[FRONT+BACK] key.
3
Specify whether or not the front cover
is to be copied on.
is to be copied on.
Select [YES] or [NO] in
the touch panel. If
[YES] is selected, the
first page of the
document will be
copied onto the front
cover sheet.
[YES] is selected, the
first page of the
document will be
copied onto the front
cover sheet.
4
Touch the [OK] key in the cover
setting screen.
setting screen.
Return to the special modes screen.
5
Touch the [OK] key in the special
modes screen.
modes screen.
You will return to the main screen of copy mode.
6
Load the cover paper to be used into
the bypass tray.
the bypass tray.
Load the same size of
paper as the paper to
be used for the copy
job.
paper as the paper to
be used for the copy
job.
L
COVER
OT
COVER
SPECIAL MODES
FRONT
BACK
FRONT+BACK
PRINT ON FRONT COVER?
YES
NO
OK
CANCEL
OK
CK
PRINT ON FRONT COVER?
YES
NO
OK
CANCEL
About the steps that follow
See page 23.
See page 23.
• It is not possible to copy on the inside of a
front cover, nor on either side of a back
cover.
cover.
• Be sure to place the originals in the RSPF.
The document glass cannot be used for this
function.
function.
• During cover copying, stream feeding mode
will not function even if enabled in the key
operator programs. (See the "Key
operator’s guide".)
operator programs. (See the "Key
operator’s guide".)
• To cancel the cover copy function, select
the cover copy function again and touch the
[CANCEL] key. (See the screen of step 2.)
[CANCEL] key. (See the screen of step 2.)
Note
ar_m318_uk_cpy.book 49 ページ 2007年1月15日 月曜日 午前11時36分
50
CONVENIENT COPY FUNCTIONS
CARD SHOT
The front and back of a card can be copied onto one sheet of paper.
This function is convenient for making copies for certification purposes and helps save paper.
This function is convenient for making copies for certification purposes and helps save paper.
• Copying is only possible on standard size paper.
• The image cannot be rotated when using this
• The image cannot be rotated when using this
function.
1
Make sure that a suitable paper size is
selected, or select another size using
the [PAPER SELECT] key.
selected, or select another size using
the [PAPER SELECT] key.
2
Touch the
key and then touch the
[CARD SHOT] key in the special
modes screen.
modes screen.
The CARD SHOT setting
screen will appear. A
card shot icon (
screen will appear. A
card shot icon (
) will
also appear in the upper
left corner of the screen
to indicate that the
function is turned on.
left corner of the screen
to indicate that the
function is turned on.
3
Enter the X dimension (width) and Y
dimension (length) of the original card
with the
dimension (length) of the original card
with the
keys.
• X (width) is initially selected. Enter X dimension
and then touch the Y (
) key to enter Y
dimension.
• To change the X or Y value back to the default
value, touch the [SIZE RESET] key. The default
values can be changed in the key operator
programs. (See the "Key operator's guide".)
values can be changed in the key operator
programs. (See the "Key operator's guide".)
• To have the images enlarged or reduced by a
suitable ratio based on the entered original size
so that the front and back sides fit into the
selected paper size, touch the [FIT TO PAGE]
key.
so that the front and back sides fit into the
selected paper size, touch the [FIT TO PAGE]
key.
4
Touch the outer [OK] key.
You will return to the
main screen of copy
mode.
main screen of copy
mode.
Original
Example:
Portrait
A4 (8-1/2" x 11")
size
Portrait
A4 (8-1/2" x 11")
size
Example:
Landscape
A4 (8-1/2" x 11")
size
Landscape
A4 (8-1/2" x 11")
size
Copy
Back of
card
Front of
card
CARD
CARD
CARD
EXPOSURE
AUTO A4
PAPER SELECT
100%
COVER
ORIGINAL
SIZE
CARD SHOT
SIZE RESET
CANCEL
OK
FIT TO
PAGE
SIZE RESET
CANCEL
OK
OK
FIT TO
PAGE
ar_m318_uk_cpy.book 50 ページ 2007年1月15日 月曜日 午前11時36分
Click on the first or last page to see other AR-M256 (serv.man18) service manuals if exist.