Sharp AR-M236 (serv.man12) User Manual / Operation Manual ▷ View online
51
USER SETTINGS
4
GENERAL PROCEDURE FOR CUSTOM SETTINGS
1
Press the [CUSTOM SETTINGS] key.
2
Touch the key of the desired setting.
The setting screen will appear.
The setting screen will appear.
Each of the custom settings is explained on the
following pages.
The [TRAY SETTINGS] key is selected in the
following example.
following pages.
The [TRAY SETTINGS] key is selected in the
following example.
When the [TRAY SETTINGS] key is selected, the
following screen appears.
following screen appears.
3
Touch the [OK] key in the setting
screen to close it.
screen to close it.
4
When you are ready to exit the custom
settings, touch the [EXIT] key.
settings, touch the [EXIT] key.
• When a checkbox appears next to an item
in a screen, touch the checkbox (
) to
select the item. A checkmark (
) will
appear to indicate that the item is
selected.
In the above settings, tray 1 can be used
for printer, copy, and fax mode. Tray 2
and tray 3 can only be used for copy
mode.
selected.
In the above settings, tray 1 can be used
for printer, copy, and fax mode. Tray 2
and tray 3 can only be used for copy
mode.
• For a detailed explanation of the trays,
see "CHANGING A TRAY’S PAPER
TYPE AND PAPER SIZE SETTINGS"
(p.19).
TYPE AND PAPER SIZE SETTINGS"
(p.19).
DATA
LINE
B STATUS
CUSTOM SETTINGS
CUSTOM SETTINGS
TOTAL COUNT
TRAY SETTINGS
ADDRESS
CONTROL
KEYBOARD
SELECT
KEY OPERATOR PROGRAMS
CLOCK
DISPLAY
CONTRAST
LIST PRINT
FAX DATA
FORWARD
RECEIVE MODE
EXIT
CUSTOM SETTINGS
TRAY SETTINGS
TRAY 1
TRAY 3
TRAY 2
PLAIN / B4
PLAIN / A3
TYPE / SIZE
PRINT
FAX
OK
1/3
PLAIN / A4
COPY
Note
CUSTOM SETTINGS
TOTAL COUNT
TRAY SETTINGS
KEYBOARD
SELECT
KEY OPERATOR PROGRAMS
CLOCK
DISPLAY
CONTRAST
ADDRESS
CONTROL
LIST PRINT
FAX DATA
FORWARD
RECEIVE MODE
EXIT
52
USER SETTINGS
SETTINGS
Total count
The total page count display shows the following
counts:
counts:
• Total number of copies and printed pages
• Number of pages fed through the RSPF
• Number of two-sided copies
• Number of times the stapler was used
• Number of pages sent using the network scanner
• Number of pages fed through the RSPF
• Number of two-sided copies
• Number of times the stapler was used
• Number of pages sent using the network scanner
function
• Number of sent and received fax pages
The counts that appear will vary depending on the
peripheral equipment installed.
peripheral equipment installed.
• Each sheet of paper that is A3 (11" x 17") size is
counted as two sheets.
• Each sheet of paper used for automatic two-sided
copying is counted as two sheets (A3 (11" x 17")
paper is counted as four sheets.).
paper is counted as four sheets.).
Display contrast
Screen contrast adjustment is used to make the touch
panel easier to view under various lighting conditions.
Touch the [LIGHTER] key to make the screen lighter,
or the [DARKER] key to make the screen darker.
panel easier to view under various lighting conditions.
Touch the [LIGHTER] key to make the screen lighter,
or the [DARKER] key to make the screen darker.
List print
Use this to print the PRINTER TEST PAGE, the FAX
REPORT, or the SENDING ADDRESS LIST.
REPORT, or the SENDING ADDRESS LIST.
Clock
Use this to set the date and time of the machine’s
built-in clock. The date and time are used for functions
that require date and time information.
built-in clock. The date and time are used for functions
that require date and time information.
Tray settings
The paper type, paper size, and enabled modes can
be set for each tray. Automatic tray switching and
disabling of two-sided printing on letterhead paper can
also be set. See page 19 and 20 for details on setting
the paper type and paper size.
be set for each tray. Automatic tray switching and
disabling of two-sided printing on letterhead paper can
also be set. See page 19 and 20 for details on setting
the paper type and paper size.
• To select which trays can be used in each of copy,
printer, and fax modes, select the checkboxes (
)
of the desired trays in each mode.
• When a tray runs out of paper in the middle of a job,
the auto tray switching function automatically
switches the paper source to another tray that has
the same paper size and paper type settings.
(The auto tray switching function cannot be set for
the bypass tray.)
switches the paper source to another tray that has
the same paper size and paper type settings.
(The auto tray switching function cannot be set for
the bypass tray.)
Keyboard select
When using the fax or network scanner function, you
can change the layout of the keyboard that appears in
the letter entry screen. Select the layout that you find
easiest to use.
can change the layout of the keyboard that appears in
the letter entry screen. Select the layout that you find
easiest to use.
The following three keyboard configurations are
available:
available:
• Keyboard 1 (QWERTY configuration)*
• Keyboard 2 (AZERTY configuration)
• Keyboard 3 (ABCDEF configuration)
• Keyboard 2 (AZERTY configuration)
• Keyboard 3 (ABCDEF configuration)
*
The default setting is "Keyboard 1".
(Example: Letter entry screen when Keyboard 3 is
selected.)
selected.)
ADDRESS NAME
SPACE
AB/ab
12#$
OK
CANCEL
ABC
abc
ÀÄÂ/àäâ
a
a
c
d
g
h
i
j
k
l
m
n
o
p
q
t
u
v
w
x
y
z
r
s
@
f
e
b
53
4
JOB PROGRAM MEMORY
If you frequently use the same settings for copy jobs, you can store in the settings in a job program. Up to 10 job
programs can be stored, and the programs are retained even when the power is turned off. By storing frequently
used copy settings in a program, you can eliminate the bother of selecting the settings each time you use them for a
copy job.
● After a job program is stored, if any settings of the key operator programs related to the stored job program are
programs can be stored, and the programs are retained even when the power is turned off. By storing frequently
used copy settings in a program, you can eliminate the bother of selecting the settings each time you use them for a
copy job.
● After a job program is stored, if any settings of the key operator programs related to the stored job program are
prohibited, the related settings in the job program will not be recalled.
● If the overwriting of job programs is prohibited in the key operator programs, it will not be possible to overwrite or
delete a job program.
● To exit job program memory mode, exit the job memory mode, press the [CLEAR ALL] key (
) on the operation
panel or touch the [EXIT] key on the touch panel.
STORING A JOB PROGRAM
1
Press the [
] key.
2
Touch the [STORE/DELETE] key.
3
Touch a program number from 1 to 10
in the storage register screen.
in the storage register screen.
4
Select the copy settings that you wish
to store in the program.
to store in the program.
The number of copies
cannot be stored.
cannot be stored.
5
Touch the [OK] key.
The selected settings will
be stored under the
program number
selected in step 3.
be stored under the
program number
selected in step 3.
If a numeric key is selected that has already
been programmed, a confirmation screen
will appear. To replace the existing program
with the new program, touch the [STORE]
key and continue from step 4. If you do not
wish to replace the existing program, touch
the [CANCEL] key to return to the above
screen and select a different numeric key.
been programmed, a confirmation screen
will appear. To replace the existing program
with the new program, touch the [STORE]
key and continue from step 4. If you do not
wish to replace the existing program, touch
the [CANCEL] key to return to the above
screen and select a different numeric key.
ACC.#-C
S
NUMBER.
ECALL
STORE/DELETE
ROGRAMS
SS PROGRAM NUMBER.
RECALL
STORE
Note
A4
A3
SPECIAL MODES
2-SIDED COPY
OUTPUT
TO STORE, MAKE SELECTIONS AND PRESS
[OK], TO DELETE, PRESS [CANCEL].
[OK], TO DELETE, PRESS [CANCEL].
A4
AUTO
EXPOSURE
AUTO A4
PAPER SELECT
100%
COPY RATIO
D PRESS
EL].
EL].
CANCEL
A4
A3
OK
54
USER SETTINGS
EXECUTING A JOB PROGRAM
1
Press the [
] key.
2
Touch the program number key of the
desired program.
desired program.
The job program will be
executed. A number for
which no job program
has been stored cannot
be selected.
executed. A number for
which no job program
has been stored cannot
be selected.
3
Place the original, check the original
size, and then set the number of
copies and any other desired copy
settings not stored in the program.
When finished, press the [START] key
(
size, and then set the number of
copies and any other desired copy
settings not stored in the program.
When finished, press the [START] key
(
).
DELETING A STORED JOB PROGRAM
1
Press the [
] key.
2
Touch the [STORE/DELETE] key.
3
Select the program number of the
program to be deleted.
program to be deleted.
If a number key for which
no job program has been
stored is selected, the
proceed to step 4 on the
previous page (for
storing a job program).
no job program has been
stored is selected, the
proceed to step 4 on the
previous page (for
storing a job program).
4
Touch the [DELETE] key.
The selected program will
be deleted and you will
return to the screen of step
3. If the [CANCEL] key is
touched, you will return to
the screen of step 3
without deleting the
program.
be deleted and you will
return to the screen of step
3. If the [CANCEL] key is
touched, you will return to
the screen of step 3
without deleting the
program.
If you are finished deleting programs, touch the [EXIT]
key in the screen of step 3 to exit.
key in the screen of step 3 to exit.
ACC.#-C
S
JOB PROGRAMS
PRESS PROGRAM NUMBER.
RECALL
ACC.#-C
ACC.#-C
S
NUMBER.
ECALL
STORE/DELETE
EXIT
STORE/DELETE
REC LL
STORE/DELET
A JOB PROGRAM HAS BEEN ALREADY STORED.
STORE ANOTHER PROGRAM?
CANCEL
DELETE
STORE
Click on the first or last page to see other AR-M236 (serv.man12) service manuals if exist.