AR-M236 (serv.man12). Operation Manual — Sharp Copying Equipment User Guide / Operation Manual

Model
AR-M236 (serv.man12)
Pages
100
Size
2.39 MB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Copying Equipment / Operation Manual
File
ar-m236-sm12.pdf
Date

View Sharp AR-M236 (serv.man12) User Guide / Operation Manual online

MODEL
AR-M236
AR-M276
DIGITAL MULTIFUNCTIONAL 
SYSTEM
OPERATION MANUAL
(for copier)
• BEFORE USING 
   THE MACHINE
• COPY FUNCTIONS
• CONVENIENT COPY 
   FUNCTIONS
• USER SETTINGS
• TROUBLESHOOTING
AND MAINTENANCE
• PERIPHERAL DEVICES 
   AND SUPPLIES
• APPENDIX 
8
21
35
50
56
75
79
Page
With the RSPF installed
The CE mark logo label is affixed on an equipment in case that the directives described in the
above sentence are applicable to the product. (This sentence is not applicable in any country
where the above directives are not required.)
Warning
This is a Class A product. In a domestic environment this product may cause radio 
interference in which case the user may be required to take adequate measures.
In some areas, the "POWER" switch positions are marked "I" and "   " on the copier 
instead of "ON" and "OFF".
If your copier is so marked, please read "I" for "ON" and "    " for "OFF".
Caution!
For a complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and shall be easily 
accessible.
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 
93/68/EEC.
Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 
93/68/EWG.
Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la 
directive 93/68/CEE.
Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/EEG.
Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillæg nr. 93/68/EEC.
Quest’ apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC, come emendata dalla 
direttiva 93/68/EEC.
Este equipamento obedece às exigências das directivas 89/336/CEE e 73/23/CEE, na sua versão corrigida 
pela directiva 93/68/CEE.
Este aparato satisface las exigencias de las Directivas 89/336/CEE y 73/23/CEE, modificadas por medio de 
la 93/68/CEE.
Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/EEC och 73/23/EEC så som kompletteras av 
93/68/EEC.
Dette produktet oppfyller betingelsene i derektivene 89/336/EEC og 73/23/EEC i endringen 93/68/EEC.
Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 
93/68/EEC.
Do not make copies of anything which is prohibited from copying by law. The
following items are normally prohibited from copying by national law. Other 
items may be prohibited by local law.  
 Checks
 Passports
 Driver's licenses
 Money
 Stamps
 Bonds
 Stocks
 Bank drafts
1
CONTENTS
CAUTIONS................................................................................................................................................. 3
● CAUTIONS ON USING THE MACHINE........................................................................................................... 3
● IMPORTANT POINTS WHEN SELECTING AN INSTALLATION SITE ........................................................... 3
● CAUTIONS ON HANDLING THE MACHINE.................................................................................................... 4
● ENVIRONMENTAL INFORMATION................................................................................................................. 5
USING THE MANUAL ............................................................................................................................... 5
● ABOUT THE OPERATION MANUALS............................................................................................................. 5
● THE MEANING OF "R" IN ORIGINAL AND PAPER SIZE INDICATIONS ....................................................... 6
● CONVENTIONS USED IN THIS MANUAL....................................................................................................... 6
MAIN FEATURES ...................................................................................................................................... 7
1
BEFORE USING THE MACHINE
PART NAMES AND FUNCTIONS ..................... 8
● OPERATION PANEL ......................................10
● TOUCH PANEL ..............................................11
POWER ON AND OFF..................................... 13
● POWER ON ....................................................13
● POWER OFF ..................................................13
● INITIAL SETTINGS.........................................14
● POWER SAVE MODES..................................14
LOADING PAPER............................................ 15
● PAPER............................................................15
● LOADING PAPER...........................................17
● CHANGING A TRAY’S PAPER TYPE AND 
PAPER SIZE SETTINGS................................19
2
COPY FUNCTIONS
MAIN SCREEN OF COPY MODE ................... 21
NORMAL COPYING ........................................ 22
● COPYING FROM THE DOCUMENT GLASS ....22 
● COPYING FROM THE RSPF .........................23
● POINTS TO NOTE WHEN MAKING COPIES ...24
● BYPASS FEED (special paper) ......................26
AUTOMATIC TWO-SIDED COPYING ............. 27
● USING THE DOCUMENT GLASS..................27
● USING THE RSPF..........................................28
EXPOSURE ADJUSTMENT ............................ 29
● SELECTING THE ORIGINAL IMAGE TYPE AND 
MANUALLY ADJUSTING THE EXPOSURE......29
REDUCTION/ENLARGEMENT/ZOOM............ 30
● AUTOMATIC RATIO SELECTION .................30
● MANUAL RATIO SELECTION........................31
● SELECTING THE VERTICAL AND 
HORIZONTAL COPY RATIOS SEPARATELY 
(XY ZOOM copying)........................................32
INTERRUPTING A COPY RUN ....................... 34
3
CONVENIENT COPY FUNCTIONS
COPY FINISHING FUNCTIONS ...................... 35
● SORT COPY.................................................. 35
● GROUP COPY............................................... 35
● OFFSET FUNCTION ..................................... 35
● STAPLE SORT (when the finisher 
(AR-FN5N) is installed) .................................. 37
● ORIENTATION OF THE ORIGINAL AND 
STAPLING POSITIONS................................. 37
SPECIAL MODES............................................ 39
● GENERAL PROCEDURE FOR USING THE 
SPECIAL FUNCTIONS .................................. 40
● MARGIN SHIFT COPY .................................. 41
● ERASE COPY................................................ 42
● DUAL PAGE COPY ....................................... 43
● PAMPHLET COPY ........................................ 44
● JOB BUILD MODE......................................... 45
● MULTI SHOT COPY ...................................... 46
● ORIGINAL SIZE............................................. 47
● COVER COPY ............................................... 48
4
USER SETTINGS
CUSTOM SETTINGS....................................... 50
● GENERAL PROCEDURE FOR CUSTOM 
SETTINGS ..................................................... 51
● SETTINGS ..................................................... 52
JOB PROGRAM MEMORY ............................. 53
● STORING A JOB PROGRAM........................ 53
● EXECUTING A JOB PROGRAM ................... 54
● DELETING A STORED JOB PROGRAM ...... 54
AUDITING MODE ............................................ 55
● COPYING WHEN AUDITING MODE IS 
ENABLED ...................................................... 55
2
5
TROUBLESHOOTING AND MAINTENANCE
DISPLAY MESSAGES..................................... 57
TROUBLESHOOTING ..................................... 59
MISFEED REMOVAL....................................... 63
● MISFEED REMOVAL GUIDANCE .................63
● MISFEED IN THE RSPF.................................64
● MISFEED IN THE BYPASS TRAY .................65
● MISFEED IN THE MACHINE..........................65
● MISFEED IN THE CENTRE TRAY.................67
● MISFEED IN THE UPPER PAPER TRAY ......67
● MISFEED IN THE LOWER PAPER TRAY .....68
● MISFEED IN THE UPPER EXIT AREA 
(when a job separator tray kit or finisher 
(AR-FN5N) is installed) ...................................69
● MISFEED IN AN OUTPUT TRAY 
(when a finisher (AR-FN5N) is installed).........69
REPLACING THE TONER CARTRIDGE ........ 71
STAPLE CARTRIDGE REPLACEMENT......... 72
● STAPLE JAM REMOVAL ...............................73
CHECKING THE TONER QUANTITY AND 
TOTAL OUTPUT COUNT ................................ 73
CLEANING THE MACHINE ............................. 74
● DOCUMENT GLASS AND DOCUMENT 
COVER/RSPF.................................................74
● THE BYPASS TRAY PAPER FEED 
ROLLER..........................................................74
6
PERIPHERAL DEVICES AND SUPPLIES
PERIPHERAL DEVICES.................................. 75
● FINISHER (AR-FN5N) ....................................76
● 500-SHEET PAPER FEED UNIT/ 
2 x 500-SHEET PAPER FEED UNIT..............78
● REVERSING SINGLE PASS FEEDER  .........79
STORAGE OF SUPPLIES ............................... 78
● PROPER STORAGE ......................................78
7
APPENDIX
SPECIFICATIONS ........................................... 79
INDEX............................................................... 89
● INDEX BY PURPOSE.....................................92
Page of 100

Download Sharp AR-M236 (serv.man12) User Guide / Operation Manual

Here you can view online or download Sharp AR-M236 (serv.man12) User Guide / Operation Manual in pdf. This User Guide / Operation Manual can help you recover, restore, fix, disassemble and repair Sharp AR-M236 (serv.man12) Copying Equipment. Information contained in Sharp AR-M236 (serv.man12) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).