DOWNLOAD Sharp AR-M236 (serv.man12) Service Manual ↓ Size: 2.39 MB | Pages: 100 in PDF or view online for FREE

If you wish to use the paper other than the automatically selected original size, original size setting is specified by 
the special modes. The mix feeding setting (p.25) is also selected here.

The original size setting 
screen will appear.

[MANUAL] key is highlighted and the selected paper 
size is displayed.

You will return to the special modes menu 
screen.

You will return to the main screen of the copy 
mode.

To select an inch size original, touch the 
[AB

INCH] key. Inch sizes will appear.

ORIGINAL

SIZE

COV

AL MODES

MANUAL

GINAL SIZE

AUTO

MIX SIZE ORIGINAL FEEDING MOD

OK

INCH

AB

OK

AUTO

MANUAL

ORIGINAL SIZE

A5

B5

B5R

A4R

A5

A4R

B4

To select mixed feeding, select the "MIX SIZE 
ORIGINAL FEEDING MODE" checkbox. 
Mixed feeding is explained on page 25.

Cover copy mode is used to add a cover to the front or back, or both the front and back, of a multipage document.
To use cover copy mode, the RSPF must be used.

One-sided originals

Back cover 
(no copying)

Front cover 
(can copy onto front side)

One-sided copies 
(copying onto a cover)

Two-sided originals

SHARP

SHARP

Cover original

1

2

3

4

1

2

3

4

3

4

5

1

2

Cover original

SHARP

Back cover 
(no copying)

Front cover 
(can copy onto front side)

SHARP

1

2

3

4

5

One-sided originals

Two-sided copies 
(copying onto a cover)

Two-sided originals

2

3

4

1

Cover original

SHARP

1

2

3

4

SHARP

Cover original

2

3

4

1

SHARP

Back cover 
(no copying)

Front cover 
(can copy onto front side) 
(Back side of cover is blank.)

• A front cover, back cover, or both a front and a 

back cover can be selected.

• You can specify whether or not the front cover is 

copied on.

• Copying is not possible on either side of a back 

cover.

2

3

4

1

Back cover

Front cover 

(not copying onto a cover)

One-sided originals

Two-sided originals

1

2

3

4

1

2

3

4

4

1

2

3

Front cover 

One-sided originals

Two-sided originals

1

2

3

4

4

1

2

3

Back cover

One-sided copies 
(not copying onto a cover)

One-sided copies 
(not copying onto a cover)

• A front cover, back cover, or both a front and a 

back cover can be selected.

The cover  setting screen 
will appear.
The cover icon (

, etc.) 

will also appear in the 
screen to indicate that 
the function is turned on.

To add only a front cover, touch the [FRONT] key. To 
add only a back cover, touch the [BACK] key. To add 
both a front and back cover, touch the 
[FRONT+BACK] key.

Select [YES] or [NO] in 

the touch panel. If 
[YES] is selected, the 
first page of the 
document will be 
copied onto the front 
cover sheet.

Return to the special modes screen.

You will return to the main screen of copy mode.

Load the same size of 
paper as the paper to 
be used for the copy 
job.

L

COVER

COVER

SPECIAL MODES

FRONT

BACK

FRONT+BACK

PRINT ON FRONT COVER?

YES

NO

OK

CANCEL

OK

CK

PRINT ON FRONT COVER?

YES

NO

OK

CANCEL

About the steps that follow
See page 23.

• It is not possible to copy on the inside of a 

front cover, nor on either side of a back 
cover.

• Be sure to place the originals in the RSPF. 

The document glass cannot be used for this 
function.

• During cover copying, stream feeding mode 

will not function even if enabled in the key 
operator programs.  (See the "Key 
operator’s guide".) 

• To cancel the cover copy function, select 

the cover copy function again and touch the 
[CANCEL] key. (See the screen of step 2.) 

The custom settings let you adjust certain features of the machine to better suit your needs. The custom settings 
include the following settings:

●TOTAL COUNT........................... This displays the number of pages output by the machine. (p.52)

●DISPLAY CONTRAST ................ This is used to adjust the contrast of the touch panel. (p.52)

●LIST PRINT*

1

.............................. This is used to print a setting list or a font list. (p.52)

●CLOCK........................................ This is used to set the date and time of the machine’s built-in clock. (p.52)

●TRAY SETTINGS........................ This is used to configure the paper type and paper size settings for each 

tray, and select whether or not automatic switch over to another tray with the 
same size and type of paper will take place if the paper runs out during 
continuous printing. (p.52)

The following settings are explained in detail in the operation manual for facsimile.
●ADDRESS CONTROL*

2

............. If your machine has the fax option, this setting is used to store fax numbers 

for automatic dialling. Group keys and user indexes can also be 
programmed.

●RECEIVE MODE*

2

...................... This is used to select the fax receive mode (automatic or manual).

●FAX DATA FORWARD*

2

............ This is used to forward faxes received in memory to another destination.

●KEYBOARD SELECT*

3

.............. When using the fax or network scanner function, use this setting to change 

the layout of the keyboard in the letter entry screen. (p.52)

●KEY OPERATOR PROGRAMS.. Settings for key operators (administrators of this machine). A key appears for 

these settings in the custom settings menu screen. For explanations of the 
settings, see the Key operator’s guide. (For explanations of key operator 
programs for the fax option, see the operation manual for facsimile.)

*

1

The fax option or network printer function must be installed.

*

2

The fax option must be installed.

*

3

The fax option or network scanner function must be installed.