DOWNLOAD Sharp AR-FX7 Service Manual ↓ Size: 4.14 MB | Pages: 104 in PDF or view online for FREE

AR-FX7  SIMULATION  6 - 10

1.

Select the item with the 10-key, and press the [START] key.

2.

Enter the set value with the 10-key.

The sending dial cannot be interrupted.

3.

Select the soft SW reflection.

Note: Executable only when the FAX is installed.

Enter the DTMF signal (1 digit (1 to 9, 0, *, #)) and press the [START]
key. 

When the [CUSTOM SETTINGS] key is pressed during execution, the
simulation is terminated.

Note: Executable only when the FAX is installed.

Enter the DTMF signal (1 digit (1 to 9, 0, *, #)) and press the [START]
key.

When the [CUSTOM SETTINGS] key is pressed during execution, the
simulation is terminated.

Note: Executable only when the FAX is installed.

Select "1: YES" with the 10-key, and press the [START] key. The data
are backed up. (When "2: NO" is selected, the simulation is canceled.)

* The AR-FX5 data cannot be written into the AR-FX7. If it is exe-

cuted, data are initialized and deleted. In addition, the AR-FX7 data
cannot be used in the AR-FX5.

Note: Executable only when the FAX is installed.

Select "1: YES" with the 10-key, and press the [START] key. The Flash
ROM data are read out and written into the SRAM. (When "2: NO" is
selected, the simulation is canceled.)

* The AR-FX5 data cannot be written into the AR-FX7. If it is exe-

cuted, data are initialized and deleted. In addition, the AR-FX7 data
cannot be used in the AR-FX5.

Note: Executable only when the FAX is installed.

1.

Select the item to be printed.

2.

Press the [START] key.

The information of the selected item is printed. 

66-16

Operation check/test

Used to perform the dial test. (DTMF signal send test)

FAX

Operation

Item

Content

Setting 

range

0

EXECUTE

Execution

–

1

HIGH (SW)

High group

0-15

2

HIGH-LOW (SW)

High group, Low group

0-15

Item

Content

1

NO STORE TO SW

Not reflected.

2

STORE TO SW

Reflected. (Shift SW value changed.)

66-17

Operation check/test

Used to check the DTMF signal send operation. 
(Signal send level: Max.)

FAX

Operation

66-18

Operation check/test

Used to check the DTMF signal send operation. 
(Signal send level: Set by soft SW.)

FAX

Operation

1

1

66-19

Back up

Used to write the SRAM data to the Flash ROM. 

FAX

Data

66-20

Back up

Used to write the Flash ROM data to the SRAM.

FAX

Data

66-21

Check

FAX information print

FAX

Data

Item

Content

1

USER SW.LIST

User setting list

2

SOFT SW.LIST

Soft SW list

3

SYSTEM ERROR

System error list
Used to print the system error log (error 
number and time).

AR-FX7  SIMULATION  6 - 11

Note: Executable only when the FAX is installed.

1.

Select the set volume. (Max., Middle, Min.)

2.

Press the [START] key.

Switch of 1, 2, and 3 can be made during execution of the simulation. 

During execution of the simulation, sounds are generated.

Note: Executable only when the FAX is installed.

Select "1: YES" with the 10-key and press the [START] key. The FAST
storage data are cleared. (When "2: NO" is selected, the simulation is
canceled.)

Note: Executable only when the FAX is installed.

When the relay state of the polarity reverse relay, the handset hook
switch, or the external telephone hook switch is changed, the content
of change is displayed regardless of the soft SW setup (real time). The
display of change is kept until an interruption command is supplied by
pressing the [CUSTOM SETTINGS] key. 

Note: Executable only when the FAX is installed.

1.

Enter the set value. (Valid only 0 to 8)

2.

The entered bit is alternatively switched between "0" and 1" and
the target signal name is highlighted.

3.

Press the [START] key to send the signal. 

When the [CUSTUM SETTINGS] key is pressed, the output is termi-
nated.

Note: Executable only when the FAX is installed.

The fixed data received from the line are checked and the result is dis-
played. 

When data are coincident, "OK" is displayed. When not, "NG" is dis-
played. 

Note: Executable only when the FAX is installed.

4

PROTOCOL

Protocol error list
Regardless of soft SW38-1 status, the 
protocol monitor of the preceding 
communication is printed. (Printing is 
allowed at any time before starting the 
next communication.) For this operation, 
the protocol monitor of one 
communication is always buffered.

66-22

Setting

Handset sound volume adjustment (Japan only)

FAX

Operation

66-24

Data clear

Used to clear the FAST storage data. (SEC only)

FAX

Data  

Initializing

Item

Content

66-30

Operation test/check

Used to set the TEL/LIU.

FAX

Operation

Item

Notification contents

Signal low

Signal high

HS2

ON

OFF

HS1

ON

OFF

RHS

ON

OFF

EXHS

ON

OFF

66-31

Setting

Used to set the TEL/LIU.

FAX

Operation

66-32

Operation test/check

Receive data check

FAX

Operation

00001

1   2   3   4   5

AR-FX7  SIMULATION  6 - 12

Signal detection is checked and the result is displayed. 

Note: Executable only when the FAX is installed.

The send/receive test is performed, and the time required for send/
receive of the image data in the test is measured and displayed.

When there are two or more send/receive operations of image data in
one communication, only the time of the last send/receive data near
the end is measured.

Note: Executable only when the FAX is installed. 

The following test sound is delivered to the line and the speaker to
adjust the sound kind and volume.

The send level to the line is the set value of soft SW.

The set values of the selected sound kind and volume are written to
each soft SW.

1.

Sound kinds pattern

LAR: (MED. Value + 1)

MED: (SMA value +1) - (LAR value - 1)

SMA: 1 - (MED. Value + 1)

2.

Sound volume pattern

Note: Executable only when the FAX is installed.

When the [START] key is pressed, the call signal from CI pin is
detected to deliver the call sound to the line and the speaker. The vol-
ume of call sound follows the soft SW.

Signal detection and delivery of pseudo-call sound at detection are
executed until the interruption command is provided by pressing the
[CUSTOM SETTINGS] key.

Note: Executable only when the FAX is installed.

When the [START] key is pressed, the machine ringer and the pseudo-
ringer would ring.

By pressing [CUSTOM SETTINGS] key, the operation can be can-
celed.

66-33

Operation test/check 

Signal detection check 

FAX

Operation

66-34

Operation test/check 

Communication time measurement display

FAX

Operation

Setup on the user 
side when executing 
communication

Communication 
means
Picture quality
Density
ECM
Sender information

: Memory send
: Normal Character
: Lighter
: ON
: OFF

Measuring 
range

Send

From flag reception before sending of 
image data until sending of RCP frame

Receive

From flag reception before reception of 
image data until reception of RCP frame

Mode when measuring

Used to make communication not in a 
simulation process but in the normal screen 
and  measure the time.

How to check the time

Enter the simulation for communication time 
check and check the time.

Measuring unit

msec

66-37

Adjustment/Setting/Check

Speaker sound volume adjustment

FAX

Sound kinds (Test sound)

Sound volume set value

RINGER

Call sound

DEF. LAR. MED. SMA.

LINE MONITO

Line monitor sound (Test 
sound: communication 
signal sound)

DEF. LAR. MED. SMA.

ON HOOK

On-hook (Test sound, 
communication signal 
sound)

DEF. LAR. MED. SMA.

SCAN FINISH

Scan finish sound

DEF. LAR. MED. SMA.

TX/RX FINISH

Communication finish 
sound

DEF. LAR. MED. SMA.

DTMF

DTMF send sound

DEF. LAR. MED. SMA.

66-41

Adjustment/Setting/Check

CI signal check

66-52

Operation test/check

Ringer check

1

AR-FX7  SOFT SWITCH  7 - 1

Large item

Middle item

Switch content

Key operator

Soft SW No.

Usage

Dialing

Remote machine 
call disable

Pause time

Default setting

SW 28-1 – 4

When dialing disable/when error dialing

Dial call signal

Default setting

SW 22-5, 6

When dialing disable

DTMF-related item

None

SW 64-4 – 8

When dialing disable in PBX (private branch 
exchange/Fax service, etc.) 

None

SW 65-5 – 8

When dialing disable in PBX (private branch 
exchange/Fax service, etc.) 

None

SW 26-1 – 5

When dialing disable in PBX (private branch 
exchange/Fax service, etc.) 

Pulse (10PPS)

None

SW 25-1 – 4

When pulse dialing disable

Signal detection

Busy tone detection

None

SW 21-2 

When busy tone detection disable

Busy tone detection cycle

None

SW 51-1 – 2

When busy tone error is detected

Dial tone detection

None

SW 21-1

Redial

In case of an error

Resend interval

Transmitter 
function setting

SW 14-5 – 8

When send errors occur frequently

In case of an error

Number of times of resend

Transmitter 
function setting

SW 14-1 – 4

When busy

Resend interval

Transmitter 
function setting

SW 13-5 – 8

Whey busy occurs frequently

When busy

Number of times of resend

Transmitter 
function setting

SW 13-1 – 4

Arrival (Call-in)

When CI detection 
disable

CI detection

None

SW 86-2, 3

No call-in

CI signal OFF detection time None

SW 87-1 – 7

No call-in

External 
telephone

Setting of an 
external telephone 
connected

Yes/No

Default setting

SW 41-1

When an external telephone is connected

Remote switch 
number

Entry of a 2-digit number

Default setting

SW 7-1 – 8

When remote switch is erroneously detected

Remote switch 
setting

Yes/No

None

SW 6-8

When remote switch is erroneously detected

Communication General

Send level

None

SW 15-4 – 8

When the remote machine cannot receive 
signals in a proper level. 

JBIG mode

None

SW 17-4, 8

When an error occurs in the JBIG mode

SG3

V34 mode function setup

None

SW 43-1

When SG3 communication error occurs 
frequently

V34 symbol rate

None

SW43-4 – 6

When SG3 communication error occurs 
frequently

Transmission

G3/SG3

DIS reception check

One-touch/
Reduction, etc.

SW 69-8

When an error occurs in phase B

Line equalizer

None

Setting is made referring to the distance from 
the station when a communication trouble 
occurs.

SG3

V34 send speed

One-touch/
Reduction, etc.

When an error occurs in the SG3 
communication.

Manual send V34

None

SW 42-8

When an error occurs in the SG3 
communication in FAX service, etc.

G3

V29 no modulation carrier

None

When an error occurs in the V29 
communication

Modem send speed

One-touch/
Reduction, etc.

SW 16-1 – 4

To specified/unspecified destination

RTN reception error

None

SW 73-1

When judged as “OK” though RTN is received 

Reception

G3/SG3

CSI transmission

None

Maximum reception length

None

When a document of 1m or longer is received

Proxy reception

None

EQM dispersion inhibit

None

When a lot of errors occur due to the poor 
conditions of the line.

SG3

V34 reception speed

None

When fall-down occurs frequently in the SG3 
communication

G3

Countermeasure against 
echo in reception

None

When an error occurs in phase B in reception

Modem speed in reception

None

SW 16-5, 6

When the line quality is poor and a fall-back 
or an error occurs

EYE-Q check only

None

SW 72-7

Change in the detection method of training 
error