Sharp AR-FX7 Service Manual ▷ View online
AR-FX7 SIMULATION 6 - 2
*1: Display at the current state
Operation/procedure
Used to display the FAX send/receive counter.
The counter display is in 7 digits.
Note: Executable only when the FAX is installed.
Operation/procedure
1. Select the "3: NUMBER OF PRINTS", and press the [START] key.
The confirmation menu is shown.
2.
Select "1: YES."
1: YES (Cleared)
2: NO (Not cleared) (Default)
2: NO (Not cleared) (Default)
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Select "1: COPY START."
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
2.
Enter the set value of the exposure level with the 10-key, and
press the [#/P] key.
press the [#/P] key.
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
NEU
SEF/
SEES/
SEIS/SEN,
etc.
SEES/
SEIS/SEN,
etc.
BG/DG/
BD/DD
BD/DD
English, German, French,
Spanish, Dutch, Italian,
Portuguese, Swedish,
Norwegian, Finnish,
Danish
Spanish, Dutch, Italian,
Portuguese, Swedish,
Norwegian, Finnish,
Danish
SCA/SCNZ
BA/BN
American English, English,
French, Spanish
French, Spanish
Distributor
area
area
CHN
SOCC
BZ
UE5
Simplified Chinese,
American English, English
American English, English
TWN
Taiwan
BE/BT
UT1
Traditional Chinese (Local
support), American
English, English
support), American
English, English
EFS *1
Special
countries
countries
American English, English,
French, Spanish, Hebrew
French, Spanish, Hebrew
(Local support)
22-11
Purpose
Adjustment/setting/operation data output/check
(display/print)
(display/print)
Function
(Purpose)
(Purpose)
Used to display the FAX send/receive counter (FAX
reception and print counter).
reception and print counter).
Section
FAX
Item
Counter
FAX SEND PAGE/TIME
FAX send page and time
FAX RECEIVE PAGE/TIME
FAX receive page and time
FAX OUTPUT
FAX output (number of print)
Panel
display
Destination
Selection code
Panel software support
language
Panel label code
24
24-10
Purpose
Data clear
Function (Purpose)
FAX counter data clear
Section
FAX
Item
Counter
Item
Content
1
FAX SEND
(PAGE & TIME)
(PAGE & TIME)
FAX send page and time
2
FAX RECEIVE
(PAGE & TIME)
(PAGE & TIME)
FAX receive page and time
3
FAX OUTPUT
FAX output (number of prints)
46
46-12
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment (1 mode automatic
adjustment)
adjustment)
Section
FAX
Item
Image quality
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
JAM
PAPER EMPTY
Item
Setting range
Default
1
COPY START
–
–
2
FAX EXP.LEVEL
0-99
50
5 0
1
AR-FX7 SIMULATION 6 - 3
Operation/procedure
1.
Select "1: COPY START."
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
2.
Enter the set value of the exposure level with the 10-key, and
press the [#/P] key.
press the [#/P] key.
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Select "1: COPY START."
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
2.
Enter the set value of the exposure level with the 10-key, and
press the [#/P] key.
press the [#/P] key.
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Select "1: COPY START."
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
2.
Enter the set value of the exposure level with the 10-key, and
press the [#/P] key.
press the [#/P] key.
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note:Executable only when the FAX is installed.
Operation/procedure
1.
Select "1: COPY START."
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
2.
Enter the set value of the exposure level with the 10-key, and
press the [#/P] key.
press the [#/P] key.
46-13
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment (Normal mode
individual adjustment)
individual adjustment)
Section
FAX
Item
Image quality
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
JAM
PAPER EMPTY
Item
Content
Setting range
Default
1 COPY START
Copy start
–
–
2 EXP.LEVEL
Exposure level
selection
selection
0-99
50
3 AE
Normal text AE
4 MANUAL
Normal text MANUAL
46-14
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment (Fine text mode
individual adjustment)
individual adjustment)
Section
FAX
Item
Image quality
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START
Copy start
–
–
2
EXP.LEVEL
Exposure level
selection
selection
0-99
50
3
AE (PHOTO ON)
Fine text AE (Half tone)
4
AE (PHOTO OFF)
Fine text AE
5
MANUAL (PHOTO
ON)
ON)
Fine text MANUAL (Half
tone)
tone)
6
MANUAL (PHOTO
OFF)
OFF)
Fine text MANUAL
1
46-15
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment (Super Fine mode
individual adjustment)
individual adjustment)
Section
FAX
Item
Image quality
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START
Copy start
–
–
2
EXP.LEVEL
Exposure level selection
0 - 99
50
3
AE (PHOTO ON)
Super Fine AE (Half
tone)
tone)
4
AE (PHOTO OFF)
Super Fine AE
5
MANUAL
(PHOTO ON)
(PHOTO ON)
Super Fine MANUAL
(Half tone)
(Half tone)
6
MANUAL
(PHOTO OFF)
(PHOTO OFF)
Super Fine MANUAL
46-16
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX exposure level adjustment (Ultra Fine mode
individual adjustment)
individual adjustment)
Section
FAX
Item
Image quality
1
3
5 0
5 0
5 0
5 0
1
AR-FX7 SIMULATION 6 - 4
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Select "1: COPY START."
The currently set value is highlighted beside the item.
The currently set value is highlighted beside the item.
2.
Enter the set value of magnification with the 10-key, and press the
[#/P] key.
[#/P] key.
3.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no operation of tray selection.
The optimum paper tray for the scanned size is selected.
Even when the SPF/RSPF is selected, if there is no original on the
SPF/RSPF, the OC is scanned.
SPF/RSPF, the OC is scanned.
Even when the OC is selected, if there is any original on the SPF/
RSPF, the SPF/RSPF is scanned. (Setting 2)
RSPF, the SPF/RSPF is scanned. (Setting 2)
* The adjustment can be made in the range of -12.7% - +12.7% by the
increment of 0.1%.
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Select "1: COPY START."
The currently set value is displayed beside the item.
The currently set value is displayed beside the item.
2.
Press the [START] key.
Copying is started and the set value is stored.
Copying is started and the set value is stored.
There is no operation of tray selection.
The optimum paper tray for the scanned size is selected.
When two pages are scanned, duplex printing is made.
Note: Executable only when the FAX is installed.
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START
Copy start
–
–
2
EXP.LEVEL
Exposure level selection
0 - 99
50
3
AE (PHOTO ON)
Ultra Fine AE (Half
tone)
tone)
4
AE (PHOTO OFF)
Ultra Fine AE
5
MANUAL
(PHOTO ON)
(PHOTO ON)
Ultra Fine MANUAL
(Half tone)
(Half tone)
6
MANUAL
(PHOTO OFF)
(PHOTO OFF)
Ultra Fine MANUAL
48
48-8
Purpose
Adjustment
Function
(Purpose)
(Purpose)
FAX magnification adjustment (read)
Section
FAX
Related soft SW
SW112-1 to 8, SW113-1 to 8
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
JAM
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START
Copy start
–
–
2
SCAN SELECT
(OC/SPF/RSPF)
(OC/SPF/RSPF)
Scan selection (OC/
SPF/ RSPF)
SPF/ RSPF)
1-255*
128
3
OC(MAIN)
SCAN Main scanning
magnification ratio
adjustment (OC)
magnification ratio
adjustment (OC)
1-255*
128
5 0
5 0
5 0
5 0
1
4
OC(SUB)
SCAN Sub scanning
magnification ratio
adjustment (OC)
magnification ratio
adjustment (OC)
1-255*
128
5
SPF(MAIN)
SCAN Main scanning
magnification ratio
adjustment (SPF)
magnification ratio
adjustment (SPF)
1-255*
128
6
SPF(SUB)
SCAN Sub scanning
magnification ratio
adjustment (SPF)
magnification ratio
adjustment (SPF)
1-255*
128
7
RSPF(MAIN)
SCAN Main scanning
magnification ratio
adjustment (RSPF)
magnification ratio
adjustment (RSPF)
1-255*
128
8
RSPF(SUB)
SCAN Sub scanning
magnification ratio
adjustment (RSPF)
magnification ratio
adjustment (RSPF)
1-255*
128
48-9
Purpose
Adjustment
Function (Purpose)
FAX magnification adjustment (print)
Section
FAX
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
JAM
PAPER EMPTY
Item
Content
Setting
range
Default
1 COPY START Copy start
1-255
128
2 Horizontal
Print magnification ratio
adjustment (Horizontal, vertical
to paper passing)
adjustment (Horizontal, vertical
to paper passing)
1-255
128
3 Vertical
Print magnification ratio
adjustment (Vertical, parallel to
paper passing)
adjustment (Vertical, parallel to
paper passing)
1-255
128
4 Horizontal
(DUPLEX)
Print magnification ratio
adjustment on the back surface
(Horizontal, vertical to paper
passing)
adjustment on the back surface
(Horizontal, vertical to paper
passing)
1-255
128
5 Vertical
(DUPLEX)
Print magnification ratio
adjustment on the back surface
(Vertical, parallel to paper
passing)
adjustment on the back surface
(Vertical, parallel to paper
passing)
1-255
128
Item
Content
Setting
range
Default
1
1 2 8
1 2 8
1 2 8
1 2 8
1 2 8
1 2 8
2
AR-FX7 SIMULATION 6 - 5
Operation/procedure
1.
Select "1: COPY START."
The currently set value is highlighted beside the item.
The currently set value is highlighted beside the item.
2.
Enter the correction value with the 10-key, and press the [#/P] key.
3.
Press the [START] key.
Copying is started.
Copying is started.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
The optimum paper tray for the scanned size is selected.
4.
Select the scanning method.
Even when the SPF/RSPF is selected, if there is no original on the
SPF/RSPF, the OC is scanned.
Even when the OC is selected, if there is any original on the SPF/
RSPF, the SPF/RSPF is scanned. (Setting 2)
SPF/RSPF, the OC is scanned.
Even when the OC is selected, if there is any original on the SPF/
RSPF, the SPF/RSPF is scanned. (Setting 2)
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Select "1: COPY START."
The currently set value is highlighted beside the item.
The currently set value is highlighted beside the item.
2.
Press the [START] key.
Copying is started.
Copying is started.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
When two pages are scanned, duplex print is made,
Note: Executable only when the FAX is installed.
Operation/procedure
1.
Enter the soft SW number to be selected with the 10-key.
2.
Check and change the setting content of the selected soft SW.
3.
Press the [START] key to save the set content.
The FAX-related soft SW is displayed on the LCD, and changing can
be made by monitoring it.
be made by monitoring it.
Note: Executable only when the FAX is installed.
50
50-8
The adjustments on the machine side must have been normally
completed.
completed.
Purpose
Adjustment
Function (Purpose)
FAX lead edge adjustment (read)
Section
FAX
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
JAM
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START Copy start
–
–
2
SCAN
SELECT (OC/
SPF/RSPF)
SELECT (OC/
SPF/RSPF)
Scan selection (1: OC, 2:
SPF, 3: RSPF back)
SPF, 3: RSPF back)
1-3
1
3
LEAD
Scan lead edge position
adjustment value of the
selected method in 2.
adjustment value of the
selected method in 2.
43-57
50
4
LEFT
Scan left edge position
adjustment value of the
selected method in 2.
adjustment value of the
selected method in 2.
43-57
50
5
REAR
Scan rear edge position
adjustment value of the
selected method in 2.
adjustment value of the
selected method in 2.
43-57
50
6
RIGHT
Scan right edge position
adjustment value of the
selected method in 2.
adjustment value of the
selected method in 2.
43-57
50
1 2 8
1 2 8
1 2 8
1 2 8
2
5 0
5 0
5 0
2
50-9
Purpose
Adjustment
Function (Purpose)
FAX lead edge adjustment (print)
Section
FAX
Normal display
NOW PRINTING
Error display
DOOR OPEN
JAM
PAPER EMPTY
JAM
PAPER EMPTY
Item
Content
Setting
range
Default
1
COPY START
Copy start
–
–
2
LEAD
Print lead edge void
adjustment value (Front
surface)
adjustment value (Front
surface)
43-57
50
3
LEFT
Print left edge void
adjustment value (Front
surface)
adjustment value (Front
surface)
43-57
50
4
REAR
Print rear edge void
adjustment value (Front
surface)
adjustment value (Front
surface)
43-57
50
5
LEAD
(DUPLEX)
(DUPLEX)
Print lead edge void
adjustment value (Back
surface)
adjustment value (Back
surface)
43-57
50
6
LEFT (DUPLEX) Print left edge void
adjustment value (Back
surface)
surface)
43-57
50
7
REAR
(DUPLEX)
(DUPLEX)
Print rear edge void
adjustment value (Back
surface)
adjustment value (Back
surface)
43-57
50
66
66-1
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to change and check the FAX-related soft SW.
Section
FAX
1
Click on the first or last page to see other AR-FX7 service manuals if exist.