Sharp AR-FX13 (serv.man3) User Manual / Operation Manual ▷ View online
21
INITIAL SETTINGS
2
ENTERING YOUR NAME AND FAX NUMBER
To have your name and fax number printed at the top of every page you transmit, program them by pressing the
operation panel keys as shown below.
operation panel keys as shown below.
● If you enter an incorrect character or number, follow these steps to correct the mistake.
1. Press the [
] key (
) or [
] key (
) to move the cursor to the character immediately following the
incorrect character.
2. Press the [CLEAR] key (
).The character in front of the cursor is deleted.
3. Enter the correct character.
Use the following procedure to enter your name and fax number:
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "2:ENTRY MODE" appears, and
then press the [ENTER] key.
then press the [ENTER] key.
3
Press the [
] key (
) or [
] key (
)
until "3:OWN PASSCODE SET" appears,
and then press the [ENTER] key.
and then press the [ENTER] key.
4
Press the [
] key (
) or [
] key (
)
to select "1:SET" and then press the
[ENTER] key.
[ENTER] key.
5
Enter your fax number with the
numeric keys.
numeric keys.
Enter your own fax
number (maximum 20
digits) by pressing the
Numeric keys.
To insert a "+", press the
[
number (maximum 20
digits) by pressing the
Numeric keys.
To insert a "+", press the
[
] key.
6
Press the [ENTER] key.
"ENTER NAME" will
appear in the display.
appear in the display.
7
Enter your name with the numeric
keys.
keys.
Enter your name by
pressing the appropriate
Numeric keys as shown
on the left. Press each
key repeatedly until the
desired letter appears in
the display (maximum of
36 characters).
pressing the appropriate
Numeric keys as shown
on the left. Press each
key repeatedly until the
desired letter appears in
the display (maximum of
36 characters).
To enter a space, press the [1] key twice.
You can view all of the items in the menu display by pressing the [MENU] key, then using the [
] key (
) or
[
] key (
) to scroll through the function list. Pressing the [ENTER] key chooses the displayed function.
Procedures for inputting various items (name, telephone number, date, etc.) are given as follows.
Note
"2:ENTRY MODE"
Selection
"3:OWN PASSCODE SET"
Selection
"1:SET"
Selection
!Chapter02.fm 21 ページ 2008年2月4日 月曜日 午後5時48分
22
INITIAL SETTINGS
8
Press the [ENTER] key.
9
Press the [MENU] key.
Press the [MENU] key to
exit.
exit.
SETTING THE DATE AND TIME
The date and time that appear in the display are printed at the top of each page you transmit. Set the date and time
by pressing the keys on the operation panel as shown below.
If you enter an incorrect number, press the [CLEAR] key (
by pressing the keys on the operation panel as shown below.
If you enter an incorrect number, press the [CLEAR] key (
) and re-enter the number.
The time can be displayed in 12-hour or 24-hour format. "Month/Day/Year", "Day/Month/Year" or "Year/Month/Day"
can be selected for the order of display of the date.
can be selected for the order of display of the date.
Use the following procedure to set the date and time:
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "2:ENTRY MODE" appears, and
then press the [ENTER] key.
then press the [ENTER] key.
3
Press the [
] key (
) or [
] key (
)
until "2:DATE&TIME SET" appears,
and then press the [ENTER] key.
and then press the [ENTER] key.
4
Enter the year (four digits), month (two
digits), and day (two digits) with the numeric
keys and then press the [ENTER] key.
digits), and day (two digits) with the numeric
keys and then press the [ENTER] key.
The year can be entered from 2008.
5
Enter the time (hour (two digits) and
minute (two digits)) with the numeric
keys.
minute (two digits)) with the numeric
keys.
Enter the hour in the following range:
When 12-hour format is selected: 01 to 12
When 24-hour format is selected: 00 to 23
When 12-hour format is selected: 01 to 12
When 24-hour format is selected: 00 to 23
6
Press the [
] key (
) or [
] key (
)
to select "AM" or "PM".
When 24-hour format is
selected, do not perform
this step.
selected, do not perform
this step.
7
Press the [ENTER] key.
8
Press the [MENU] key.
Press the [MENU] key to
exit.
exit.
"2:ENTRY MODE"
Selection
"2:DATE&TIME SET"
Selection
ENTER DATE (2008-)
2008/01/02
2008/01/02
Year Month Day
!AR-FX13_sec.book 22 ページ 2008年2月1日 金曜日 午後5時40分
23
INITIAL SETTINGS
2
To change the display format to 12-hour or 24-hour format, follow the steps below:
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
and then press the [ENTER] key.
3
Press the [
] key (
) or [
] key (
)
until "22:DATE&TIME FORMAT"
appears, and then press the [ENTER]
key.
appears, and then press the [ENTER]
key.
4
Press the [
] key (
) or [
] key (
)
until "1:TIME FORMAT" appears, and
then press the [ENTER] key.
then press the [ENTER] key.
5
Press the [
] key (
) or [
] key (
)
to select "1:12HOUR" or "2:24HOUR".
6
Press the [ENTER] key.
7
Press the [MENU] key.
Press the [MENU] key to
exit.
exit.
"4:USER PROGRAM"
Selection
"22:DATE&TIME FORMAT"
Selection
"1:TIME FORMAT"
Selection
!AR-FX13_sec.book 23 ページ 2008年2月1日 金曜日 午後5時40分
24
INITIAL SETTINGS
To change the order of display of the date, follow the steps below:
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
and then press the [ENTER] key.
3
Press the [
] key (
) or [
] key (
)
until "22:DATE&TIME FORMAT"
appears, and then press the [ENTER]
key.
appears, and then press the [ENTER]
key.
4
Press the [
] key (
) or [
] key (
)
until "2:DATE FORMAT" appears, and
then press the [ENTER] key.
then press the [ENTER] key.
5
Press the [
] key (
) or [
] key (
)
to select the display order.
The selections are as
follows:
1:MMDDYYYY
2:DDMMYYYY
3:YYYYMMDD
follows:
1:MMDDYYYY
2:DDMMYYYY
3:YYYYMMDD
6
Press the [ENTER] key.
7
Press the [MENU] key.
Press the [MENU] key to
exit.
exit.
This selection does not affect the order of
the date that appears in "2: DATE & TIME
SET" in step 4 on page 22.
The date in this step always appears in the
format "YYYYMMDD".
the date that appears in "2: DATE & TIME
SET" in step 4 on page 22.
The date in this step always appears in the
format "YYYYMMDD".
"4:USER PROGRAM"
Selection
"22:DATE&TIME FORMAT"
Selection
"2:DATE FORMAT"
Selection
Note
!AR-FX13_sec.book 24 ページ 2008年2月1日 金曜日 午後5時40分
Click on the first or last page to see other AR-FX13 (serv.man3) service manuals if exist.