Sharp AR-FX13 (serv.man3) User Manual / Operation Manual ▷ View online
33
INITIAL SETTINGS
2
When a communication error occurs
You can select the number of recall attempts made when a communication error occurs.
If "0" is entered, the machine will not make any recall attempts.
If "0" is entered, the machine will not make any recall attempts.
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
and then press the [ENTER] key.
3
Press the [
] key (
) or [
] key (
)
until "9:RECALL TIMES ERR"
appears, and then press the [ENTER]
key.
appears, and then press the [ENTER]
key.
4
Press the numeric keys to select the
number of recall attempts.
number of recall attempts.
Enter the number of
recall times ("0" or "1").
recall times ("0" or "1").
5
Press the [ENTER] key.
6
Press the [MENU] key.
Press the [MENU] key to
exit.
exit.
"4:USER PROGRAM"
Selection
"9:RECALL TIMES ERR"
Selection
!AR-FX13_sec.book 33 ページ ２００８年２月１日 金曜日 午後５時４０分
34
INITIAL SETTINGS
SETTING THE RECALL INTERVAL
The machine will automatically reattempt transmission when a transmission is not successful because the line is
busy or a communication error occurs. This setting is used to select the interval between recall attempts.
busy or a communication error occurs. This setting is used to select the interval between recall attempts.
When the line is busy
You can select the interval between recall attempts when the line is busy. An interval from 1 to 15 minutes can be
selected.
selected.
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
and then press the [ENTER] key.
3
Press the [
] key (
) or [
] key (
)
until "10:RECALL INT. BUSY"
appears, and then press the [ENTER]
key.
appears, and then press the [ENTER]
key.
4
Press the numeric keys to select the
recall interval.
recall interval.
Enter the recall interval
("01" to "15").
("01" to "15").
5
Press the [ENTER] key.
6
Press the [MENU] key.
Press the [MENU] key to
exit.
exit.
• If a transmission is still not successful after the set number of recall attempts is made, a report will
print and the document will be cleared from memory.
• If a communication error occurs because the memory becomes full during transmission, no recall
attempts will be made.
• Recall attempts for a direct transmission will only be made when the RSPF is used. Recall attempts
will not be made when the document glass is used.
• When the machine is waiting to make a recall attempt for a direct transmission, other operations
such as storing a transmission or selecting a function cannot be performed.
Note
"4:USER PROGRAM"
Selection
"10:RECALL INT. BUSY"
Selection
!AR-FX13_sec.book 34 ページ ２００８年２月１日 金曜日 午後５時４０分
35
INITIAL SETTINGS
2
When a communication error occurs
You can select the interval between recall attempts when a communication error occurs. An interval from 0 to 15
minutes can be selected. If the recall interval is set to 0 minutes, the machine will immediately call again after
breaking the connection due to the communication error. (In New Zealand, if this value is set to "0", the recall interval
will be 1 minute.)
minutes can be selected. If the recall interval is set to 0 minutes, the machine will immediately call again after
breaking the connection due to the communication error. (In New Zealand, if this value is set to "0", the recall interval
will be 1 minute.)
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
and then press the [ENTER] key.
3
Press the [
] key (
) or [
] key (
)
until "11:RECALL INT. ERR" appears,
and then press the [ENTER] key.
and then press the [ENTER] key.
4
Press the numeric keys to select the
recall interval.
recall interval.
Enter the recall interval
("00" to "15").
("00" to "15").
5
Press the [ENTER] key.
6
Press the [MENU] key.
Press the [MENU] key to
exit.
exit.
"4:USER PROGRAM"
Selection
"11:RECALL INT. ERR"
Selection
!Chapter02.fm 35 ページ ２００８年２月４日 月曜日 午後４時５５分
36
INITIAL SETTINGS
SETTING THE INDEX FUNCTION
You can print an index mark along the edge of the pages in each job. This makes it easy to separate different jobs
on the output tray.
on the output tray.
Use the following procedure to set the index function:
1
Press the [MENU] key.
2
Press the [
] key (
) or [
] key (
)
until "4:USER PROGRAM" appears,
and then press the [ENTER] key.
and then press the [ENTER] key.
3
Press the [
] key (
) or [
] key (
)
until "21:INDEX PRINT" appears, and
then press the [ENTER] key.
then press the [ENTER] key.
4
Press the [
] key (
) or [
] key (
)
to select "1:ON" or "2:OFF".
Select "1:ON" to enable
the function.
Select "2:OFF" to disable
the function.
the function.
Select "2:OFF" to disable
the function.
5
Press the [ENTER] key.
6
Press the [MENU] key.
Press the [MENU] key to
exit.
exit.
Separate faxes
with index marks.
"4:USER PROGRAM"
Selection
"21:INDEX PRINT"
Selection
!AR-FX13_sec.book 36 ページ ２００８年２月１日 金曜日 午後５時４０分
Click on the first or last page to see other AR-FX13 (serv.man3) service manuals if exist.