MX-M160, MX-M160D, MX-M160DK (serv.man36). Appearance of a white stripe (Solid black printing, etc.) — Sharp Copying Equipment Technical Bulletin (repair manual)

Model
MX-M160 MX-M160D MX-M160DK (serv.man36)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
205.66 KB
Type
PDF
Document
Technical Bulletin
Brand
Device
Copying Equipment / Appearance of a white stripe (Solid black printing, etc.)
File
mx-m160-mx-m160d-mx-m160dk-sm36.pdf
Date

View Sharp MX-M160 / MX-M160D / MX-M160DK (serv.man36) Technical Bulletin online

 
 
 
 
 
 
 
 
 
Appearance of a white stripe 
(Solid black printing, etc.)
 
1. Model Name MX-M160D/M200D 
2. Symptom 
In a high-humidity environment, if humid paper is used for solid black printing, potential may 
not be generated by the contact of the paper with the fusing front PG. As a result of this, a 
white stripe may appear about 80mm from the leading edge of the paper. 
3. Description 
To prevent non-generation of potential by the contact of the paper with fusing front PG, a high 
resistor earth SP, high resistor electrode plate, and resistor UN have been added to the front 
side of the fusing lower frame. 
As a result of addition of the high resistor earth SP to the front side of the fusing lower frame, 
the PG earth SP mounted on the rear side has been disused. 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
Date:  
16
th
 October 2009 
Model:  
MX-M160D/200D 
Ref.:  
DCE773 
Colour:  
White 
Page:  
1 of 3 
TECHNICAL BULLETIN 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 • 
Mounting procedure of the high resistor electrode plate, resistor UN, and high resistor earth SP 
    (1) Mount the high resistor electrode plate to the fusing lower frame. 
 
    (2) Mount the resistor UN on the high resistor electrode plate. 
 
 
    (3) Fix the high resistor earth SP and resistor UN with a screw. 
 
Note 1: When mounting the fusing front SP, the "L" side of the high resistor earth SP must be  
            placed inside the relief hole of the fusing front SP. 
 
 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
Note 2: After assembly, check the conduction between fusing front PG and high resistor earth  
            SP mounting screw. 
 
4. Action 
Executed from the production in September, 2009 
No 
Model 
name 
Version 
P/G
No. 
Current parts 
New parts 
Q'ty Parts 
name 
Effec-
tive 
time 
Inter-
change-
ability 
Note
Parts code 
Parts code 
Price
rank 
MX-M160 
MX-M160D 
MX-M200D 
ALL 
 9  -21 
XEBS730P06000 
Q'ty change: 3
Æ5 AA  5  Screw(3
×6) 
'09/9 5   
 9  -31  MSPRP0087QSZZ
- - 
PG earth 
spring 
 9  -66 
MSPRD0425QSZZ
AC 
High resistor 
earth spring 
 9  -68 
QEARP0009QSZZ AD 
High resistor 
electrode 
plate 
 9  - 
DUNTK0803USZZ AL 
Resistor 
UN 
<Interchange> 
1. Interchangeable. 
4. Not Interchangeable. 
2. Current type can be used in place of new type. 
New type cannot be used in place of current type. 
5. Interchangeable if replaced with same types of related 
parts in use. 
3. Current type cannot be used in place of new type. 
New type can be used in place of current type. 
6. Others. 
Parts marked with "
" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones 
for maintaining the safety and performance of the set. 
 
Page of 3
Display

Download Sharp MX-M160 / MX-M160D / MX-M160DK (serv.man36) Technical Bulletin

Here you can view online or download Sharp MX-M160 / MX-M160D / MX-M160DK (serv.man36) Technical Bulletin in pdf. This Technical Bulletin can help you recover, restore, fix, disassemble and repair Sharp MX-M160 / MX-M160D / MX-M160DK (serv.man36) Copying Equipment. Information contained in Sharp MX-M160 / MX-M160D / MX-M160DK (serv.man36) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).