Sharp AR-C330 (serv.man14) User Manual / Operation Manual ▷ View online
2-17
CHAPTER
2
MAKING COPIES
Exposure adjustments
1
Press the “EXPOSURE” key on the touch panel.
2
Select “TEXT/PRTD. PHOTO”, “TEXT”, “TEXT/PHOTO”,
“PRINTED PHOTO”, “PHOTO”, or “MAP” depending
upon the original type.
“PRINTED PHOTO”, “PHOTO”, or “MAP” depending
upon the original type.
●
When making a copy from a copy made by AR-C330, checking
the box of COPY OF COPY then choosing the proper alternatives
depending upon the content of the original allows for the best
result.
the box of COPY OF COPY then choosing the proper alternatives
depending upon the content of the original allows for the best
result.
●
When checking the COPY OF COPY check box, TEXT/
PRTD.PHOTO, TEXT and PRINTED PHOTO can be selected.
PRTD.PHOTO, TEXT and PRINTED PHOTO can be selected.
●
If COLOUR TONE ENHANCEMENT is checked, colour copies
will be more vivid. COLOUR TONE ENHANCEMENT and
COPY OF COPY cannot be selected at the same time. The
COLOUR TONE ENHANCEMENT mode cannot be selected
with the single colour function. This mode, however, can be used
with the RGB adjust function.
will be more vivid. COLOUR TONE ENHANCEMENT and
COPY OF COPY cannot be selected at the same time. The
COLOUR TONE ENHANCEMENT mode cannot be selected
with the single colour function. This mode, however, can be used
with the RGB adjust function.
3
If “TEXT/PRTD. PHOTO”, “TEXT” or “TEXT/PHOTO”
has been selected in step 2, select “AUTO” or “MANUAL”.
has been selected in step 2, select “AUTO” or “MANUAL”.
●
When the COPY OF COPY check box is checked, the exposure
is automatically set to “MANUAL”.
is automatically set to “MANUAL”.
4
If the manual mode has been selected, use the
and
keys to adjust the copy density as desired.
EXPOSURE ADJUSTMENTS
UTPUT
AUTO
EXPOSURE
PAPE
AUTO
TEXT/
PRTD.PHOTO
TEXT
PRINTED
PHOTO
COPY
OF COPY
TEXT/PHOTO
PHOTO
MAP
EXPOSURE
AUTO
COLOUR TONE
ENHANCEMENT
ENHANCEMENT
MANUAL
PAPER SELECT
100%
COPY RATIO
A4
AUTO
OK
1 . . . 3 . . . 5
PRTD.
TE
PRI
PH
COP
OF
AUTO
MANUAL
AUTO
SIDED
OPY
UTPUT
ENHANCEMENT
1 . . . 3 . . . 5
TEXT
PRINTED
PHOTO
COPY
OF COPY
EXPOSURE
AUTO
MANUAL
PAPER SELECT
A4
AUTO
TEXT/
PRTD.PHOT
OUTPUT
2-SIDED
COPY
COLOUR TONE
ENHANCEMENT
ENHANCEMENT
1 . . .
3
. . . 5
2-18
CHAPTER
2
JOB MEMORY
Frequently used job programs can be stored in one of nine storage
registers. This is convenient for quick job recall without losing time
manually reprogramming each aspect of the job.
registers. This is convenient for quick job recall without losing time
manually reprogramming each aspect of the job.
●
All functions that can be set in the copy mode except the copy
quantity setting can be stored in the job memory.
quantity setting can be stored in the job memory.
●
If any function which has been stored in a job program is modified
by a key operator program, the key operator settings will supercede
the previous setting.
by a key operator program, the key operator settings will supercede
the previous setting.
★ KEY OPERATOR
Job memory replacement/deletion can be
prohibited. See page 8-19.
Storing a job program
1
Press the PROGRAM (
) key.
●
The JOB PROGRAMS screen will appear on the touch panel.
2
Press the “STORE/DELETE” key on the touch panel.
●
To cancel the job memory mode, press the “EXIT” key or the
CLEAR ALL (
CLEAR ALL (
CA
) key.
3
Select a program number from 1 to 9 on the touch panel.
●
The numbers which are highlighted are job registers which
already contain job programs.
already contain job programs.
●
If a program number containing a registered job program is
selected, a message will appear to confirm the selection. To
replace a stored job program with a new program, press the
“STORE” key and proceed to the next step.
To cancel replacement, press the “CANCEL” key.
selected, a message will appear to confirm the selection. To
replace a stored job program with a new program, press the
“STORE” key and proceed to the next step.
To cancel replacement, press the “CANCEL” key.
4
Make all copier selections to be stored.
NOTE:
When you store colour balance settings, make settings before
pressing the PROGRAM (
When you store colour balance settings, make settings before
pressing the PROGRAM (
) key in step 1 because sample
copies cannot be made after pressing the PROGRAM (
) key.
5
Press the “OK” key to complete the storage.
MAKING COPIES
Job memory
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
MAKE COPIER SELECTIONS AND PRESS
[OK].
DUPLEX
OK
CANCEL
A4
A3
B4
B4
AUTO
A4
STORE/DELETE
RECALL
JOB PROGRAMS
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
EXIT
2-19
CHAPTER
2
MAKING COPIES
Job memory
Deleting a stored job program
1
Follow steps 1 and 2 in “Storing a job program” on the
previous page. (1. Press the PROGRAM (
previous page. (1. Press the PROGRAM (
) key. 2.
Press the “STORE/DELETE” key.)
2
Select the storage register number of the program to be
deleted.
deleted.
●
Be sure to select a number which contains a stored program. If
not, “Storing a job program” operation will start.
not, “Storing a job program” operation will start.
3
Press the “DELETE” key or the “CANCEL” key.
●
If the “DELETE” key is pressed, the program will be deleted from
memory.
memory.
●
Press the “CANCEL” key to keep the program.
4
Press the “EXIT” key to exit the job memory mode.
Recalling a job program
1
Press the PROGRAM (
) key.
●
The JOB PROGRAMS screen will appear on the touch panel.
●
The numbers which are highlighted are program numbers which
contain stored programs.
contain stored programs.
2
Select a stored program from 1 to 9 on the touch panel.
●
All selections stored in the program will appear on the touch
panel.
panel.
●
The recalled settings may be modified for a particular job run, but
any changes made will not be stored in the job memory. To store
the new settings, follow the “Storing a job program” procedure.
any changes made will not be stored in the job memory. To store
the new settings, follow the “Storing a job program” procedure.
JOB MEMORY
JOB PROGRAMS
STORE/DELETE
PRESS PROGRAM NUMBER.
EXIT
RECALL
JOB PROGRAMS
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
EXIT
JOB PROGR MS
JOB PROGRAM HAS BEEN ALREADY STORED.
STORE ANOTHER PROGRAM?
OR DELETE?
CANCEL
DELETE
STORE
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
JOB PROGRAMS
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
EXIT
2-20
CHAPTER
2
1
Press the INTERRUPT (
) key.
●
When the optional document feeder is being used, the copier will
stop after copying any originals which have been fed into the
document feeder. The INTERRUPT indicator will blink until the
copier stops.
When the copier stops, it will return to its initial settings and the
INTERRUPT indicator will light steadily. At this time, the copier
is ready for interrupt copying.
stop after copying any originals which have been fed into the
document feeder. The INTERRUPT indicator will blink until the
copier stops.
When the copier stops, it will return to its initial settings and the
INTERRUPT indicator will light steadily. At this time, the copier
is ready for interrupt copying.
●
If the copier has been programmed in the auditing mode, the
account number entry message will appear. Enter your account
number using the 10-key pad. The number of copies of the
interrupt copying will be accumulated against this account
number.
account number entry message will appear. Enter your account
number using the 10-key pad. The number of copies of the
interrupt copying will be accumulated against this account
number.
2
When the copier stops, remove the original(s) and set
the original(s) for interrupt copying on the document
glass or in the optional document feeder tray.
the original(s) for interrupt copying on the document
glass or in the optional document feeder tray.
3
Select the desired available copier functions.
4
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
5
When the interrupt copy run is complete, press the
INTERRUPT (
INTERRUPT (
) key again to cancel the mode and
remove the original(s) used for interrupt copying.
●
The copier will reset itself to the functions which were in use
before the INTERRUPT (
before the INTERRUPT (
) key was first pressed.
6
Replace the original(s) for the interrupted job and press
the COLOUR COPY START (
the COLOUR COPY START (
) key or BLACK COPY
START (
) key to resume copying.
MAKING COPIES
Interrupting a copy run
INTERRUPTING A COPY RUN
INTERRUPT can be used to temporarily stop a long copy run so that
another job can be run.
another job can be run.
●
INTERRUPT will not function during duplex copying.
●
Duplex copying, sort, group, staple sort, and offset cannot be
selected during interrupt copying. Also job program recall cannot be
selected.
selected during interrupt copying. Also job program recall cannot be
selected.
Click on the first or last page to see other AR-C330 (serv.man14) service manuals if exist.