Sharp AR-C330 (serv.man14) User Manual / Operation Manual ▷ View online
2-9
CHAPTER
2
MAKING COPIES
Using the RADF
USING THE RADF
2-sided copies from 2-sided originals
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
set the originals face up in the document feeder tray.
2
Press the 2-SIDED COPY key.
3
Press the
key on the touch panel.
4
Press the “OK” key.
5
Enter the desired number of copies.
●
When making colour copies in the duplex mode onto B4 (8-1/2"
x 14") paper or larger, only one copy per original can be made.
Even if a multiple number of copies is set, the number will be
changed to 1 when the COLOUR COPY START (
x 14") paper or larger, only one copy per original can be made.
Even if a multiple number of copies is set, the number will be
changed to 1 when the COLOUR COPY START (
) key is
pressed.
6
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
●
To perform colour copying, press the COLOUR COPY START
(
(
) key. To perform black/white copying, press the BLACK
COPY START (
) key.
●
To cancel a copy run during duplex copying, press the CLEAR
ALL (
ALL (
CA
) key.
Copy (2-sided)
Original (2-sided)
OUTPUT
2-SIDED
COPY
AUTO
Maximum height
line
line
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO
A4
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO
A4
2-10
CHAPTER
2
1-sided copies from 2-sided originals
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
set the originals face up in the document feeder tray.
2
Press the 2-SIDED COPY key.
3
Press the
key on the touch panel.
4
Press the “OK” key.
5
Enter the desired number of copies.
6
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
●
To perform colour copying, press the COLOUR COPY START
(
(
) key. To perform black/white copying, press the BLACK
COPY START (
) key.
●
To cancel a copy run, press the CLEAR ALL (
CA
) key. Copying
will stop and the RADF will output any originals which have been
fed. Also, the number in the copy quantity display will be reset to
0.
fed. Also, the number in the copy quantity display will be reset to
0.
MAKING COPIES
Using the RADF
USING THE RADF
OUTPUT
2-SIDED
COPY
AUTO
Maximum height
line
line
Copies (1-sided)
Original (2-sided)
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO
A4
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO
A4
2-11
CHAPTER
2
MAKING COPIES
Reduction/Enlargement/Zoom
Automatic selection
1
Place the original on the document glass or in the
optional document feeder tray.
optional document feeder tray.
●
The original size will be detected and indicated on the touch
panel.
panel.
2
Press the “PAPER SELECT” key on the touch panel and
select the paper tray with the desired paper size.
select the paper tray with the desired paper size.
NOTE:
This feature will not work when original or copy paper is of non-
standard size.
This feature will not work when original or copy paper is of non-
standard size.
3
Press the “AUTO IMAGE” key on the touch panel.
●
The best reduction or enlargement ratio for the selected paper
size will be automatically set and displayed on the touch panel.
size will be automatically set and displayed on the touch panel.
●
If the originals and the selected copy paper are not in the same
orientation, the following message will appear to indicate how
the original should be placed.
orientation, the following message will appear to indicate how
the original should be placed.
ROTATE ORIGINAL FROM TO .
4
Enter the desired number of copies.
5
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
●
To cancel the automatic reduction/enlargement mode, press the
“AUTO IMAGE” key again.
“AUTO IMAGE” key again.
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either
automatically with the “AUTO IMAGE” key or manually with the
reduction, enlargement or “ZOOM” keys on the touch panel. The
zoom function enables precise copy ratio selection from 25% to
400% in 1% increments.
★ KEY OPERATOR
automatically with the “AUTO IMAGE” key or manually with the
reduction, enlargement or “ZOOM” keys on the touch panel. The
zoom function enables precise copy ratio selection from 25% to
400% in 1% increments.
★ KEY OPERATOR
A total of four extra preset copy ratios, two each
for reduction and enlargement, can be added. See page 8-10 .
SELECT
100%
COPY RATIO
AUTO IMAGE
PLEX
A4
A3
B4
A3
READY TO COPY.
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
1.
2.
3.
A4
A3
B4
131~280 g/m
2
TRANSPARENCY
SPEED MODE
TRANSPARENCY
QUALITY MODE
QUALITY MODE
60~105 g/m
2
106~130 g/m
2
PAPER TYPE
2-12
CHAPTER
2
Manual selection
1
Place the original on the document glass or in the
optional document feeder tray.
optional document feeder tray.
2
Press the “COPY RATIO” key on the touch panel.
3
Use the
MENU
1
2
key to select menu 1 or menu 2 for copy
ratio selection.
Menu 1
A. Preset reduction copy ratios are: 86%, 81%, and 70%
(77% and 64%) .
B. Preset enlargement copy ratios are:115%, 122%, and
141% (121% and 129%) .
Menu 2
A. Preset reduction copy ratios are: 50% and 25% (95%,
50%, and 25%) .
B. Preset enlargement copy ratios are: 200% and 400%
(141%, 200%, and 400%) .
4
Use the reduction, enlargement, and “ZOOM” keys on
the touch panel to set the desired copy ratio.
the touch panel to set the desired copy ratio.
Zoom ratios: Any ratio from 25% to 400% can be set in
1% increments.
1% increments.
●
Press a reduction or enlargement key to set the approximate
ratio, then press the
ratio, then press the
key to decrease the ratio or the
key
to increase the ratio.
●
To set the horizontal and vertical copy ratios separately, use the
XY ZOOM feature. See page 3-2.
XY ZOOM feature. See page 3-2.
●
To reset the copy ratio to 100%, press the “100%” key on the
touch panel.
touch panel.
●
The message “IMAGE IS LARGER THAN COPY PAPER.” may
appear, indicating that the selected copy ratio is too large for the
copy paper size. If you press the START (
appear, indicating that the selected copy ratio is too large for the
copy paper size. If you press the START (
,
) key,
however, a copy will be made.
5
Press the “OK” key.
MAKING COPIES
Reduction/Enlargement/Zoom
REDUCTION/ENLARGEMENT/ZOOM
MENU 1
MENU 2
DUPLEX
PAPER SELECT
1.
2.
2.
3.
COPY RATIO
CUSTOM
SETTINGS
A4
A3
A3
B4
100%
AUTO
B4
READY TO COPY.
AUTO
XY ZOOM
100%
ZOOM
%
100
MENU
2
70%
81%
86%
EXPOSURE
PAPER SELECT
A4
A3
A3
A5
A4
A4
B5
B4
B4
A5
A4
A4
A4
A3
A3
B5
B4
B4
141%
122%
115%
A5
A4
A4
A4
A3
A3
A5
A4
A4
B5
B4
B4
B5
A3
A3
A4
B4
B4
COPY RATIO
AUTO IMAGE
OK
1
AUTO
B4
READY TO COPY.
AUTO
XY ZOOM
50%
200%
25%
400%
100%
ZOOM
%
100
MENU 1
2
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO IMAGE
OK
AUTO
B4
READY TO COPY.
AUTO
XY ZOOM
100%
ZOOM
%
115
MENU
2
70%
81%
86%
EXPOSURE
PAPER SELECT
A4
A3
A3
A5
A4
A4
B5
B4
B4
A5
A4
A4
A4
A3
A3
B5
B4
B4
141%
122%
115%
A5
A4
A4
A4
A3
A3
A5
A4
A4
B5
B4
B4
B5
A3
A3
A4
B4
B4
COPY RATIO
AUTO IMAGE
OK
1
AUTO
A3
Click on the first or last page to see other AR-C330 (serv.man14) service manuals if exist.