Sharp AR-C330 (serv.man14) User Manual / Operation Manual ▷ View online
2-1
CHAPTER
2
CHAPTER 2
MAKING COPIES
This chapter describes the basic copying functions such as normal
copying, reduction/enlargement, and exposure adjustments.
copying, reduction/enlargement, and exposure adjustments.
Page
●
●
●
●
●
AUDITING ACCOUNTS ............................. 2-2
●
●
●
●
●
COPYING FROM THE DOCUMENT GLASS .............. 2-3
●
●
●
●
●
USING THE RADF ................................. 2-6
●
●
●
●
●
REDUCTION/ENLARGEMENT/ZOOM ................. 2-11
●
●
●
●
●
SPECIAL PAPERS (manual feed) .................... 2-14
Two-sided copying with bypass tray .................... 2-15
●
●
●
●
●
EXPOSURE ADJUSTMENTS ........................ 2-16
●
●
●
●
●
JOB MEMORY ................................... 2-18
●
●
●
●
●
INTERRUPTING A COPY RUN ....................... 2-20
2-2
CHAPTER
2
AUDITING ACCOUNTS
If this machine has been programmed in the auditing mode, it will not function until an assigned 5-digit account
number has been entered.The auditing mode can be set for both the colour and black/white (B/W) modes or for only
the colour mode. If an optional print controller board is installed, the auditing mode can be used for the printer
function (page 1-10) and the scanner function (page 1-12,) respectively.
★ KEY OPERATOR
number has been entered.The auditing mode can be set for both the colour and black/white (B/W) modes or for only
the colour mode. If an optional print controller board is installed, the auditing mode can be used for the printer
function (page 1-10) and the scanner function (page 1-12,) respectively.
★ KEY OPERATOR
See page 8-26 for setting the auditing mode.
MAKING COPIES
Auditing accounts
If the auditing mode has been set for both the colour and B/W copy
modes, the initial status of the message display will be:
modes, the initial status of the message display will be:
ENTER YOUR ACCOUNT NUMBER. –––––
If the auditing mode has been set for only the colour copy mode, the
following display will appear when the AUDIT (ACC.#) key or the
COLOUR COPY START (
following display will appear when the AUDIT (ACC.#) key or the
COLOUR COPY START (
) key is pressed.
ENTER YOUR ACCOUNT NUMBER
FOR COLOUR COPYING.
–––––
FOR COLOUR COPYING.
–––––
●
Enter your account number using the 10-key pad.
●
As each digit is entered, the dashes in the display will change to
asterisks.
asterisks.
The following message will appear after the number is entered.
ACCOUNT STATUS: COPIES MADE /REMAINING
B/W:
B/W:
000,000/000,000 CL: 000,000/000,000
“COPIES REMAINING” will appear only if account limit has been
set using a key operator program.
set using a key operator program.
★
★
★
★
★ KEY OPERATOR
See page 8-33 for account limit settings.
●
The message will be displayed for several seconds, then change
to the following message.
to the following message.
READY TO COPY.
●
When a copy run is performed, the following message will
appear.
appear.
READY TO COPY.
PRESS [AUDIT] WHEN FINISHED.
PRESS [AUDIT] WHEN FINISHED.
(In some regions, [ACC.#] is displayed in place of [ AUDIT ].)
●
In the interrupt copy mode (see page 2-20), the following
message will appear instead of the message above.
message will appear instead of the message above.
READY TO COPY. WHEN COPYING IS
FINISHED, PRESS [INTERRUPT].
FINISHED, PRESS [INTERRUPT].
NOTE:
If an unassigned number is entered, the message display will show
“ENTER YOUR ACCOUNT NUMBER.-----”, indicating that the
number was not accepted.
If an unassigned number is entered, the message display will show
“ENTER YOUR ACCOUNT NUMBER.-----”, indicating that the
number was not accepted.
When the key operator program of account number security has
been set:
If an unassigned number is entered three successive times, the
copier will not accept another number for one minute, and the
following message will appear.
been set:
If an unassigned number is entered three successive times, the
copier will not accept another number for one minute, and the
following message will appear.
PLEASE SEE YOUR KEY OPERATOR FOR
ASSISTANCE.
ASSISTANCE.
★
★
★
★
★ KEY OPERATOR
See page 8-34 for account number
security.
2-3
CHAPTER
2
COPYING FROM THE DOCUMENT GLASS
1-sided copies of 1-sided originals
1
Open the document cover and place an original face
down on the document glass, using the centring scale
to position it.
down on the document glass, using the centring scale
to position it.
●
When copying multi-page documents, copy from the last page to
the first page.
the first page.
NOTE:
Do not place objects under the original size detector, because they
may damage it.
Do not place objects under the original size detector, because they
may damage it.
2
Close the document cover.
●
The original size will be indicated on the touch panel, and the paper
tray with the corresponding paper size will be automatically selected.
tray with the corresponding paper size will be automatically selected.
3
Ensure that the 1-sided to 1-sided copying mode is
selected on the touch panel.
selected on the touch panel.
●
When no icon is displayed in the area indicated in the illustration
(
(
), the 1-sided to 1-sided copying mode is selected.
●
If the 1-sided to 1-sided mode is not selected, press the
2-SIDED COPY key and then press the 1-sided to 1-sided key
(
2-SIDED COPY key and then press the 1-sided to 1-sided key
(
) on the touch panel. Press the “OK” key to return to the
basic screen.
4
Use the 10-key pad to enter the desired number of
copies.
copies.
●
The number will be shown in the copy quantity display of the
touch panel.
touch panel.
●
A single copy can be made with the initial setting, i.e., when “0”
is displayed.
is displayed.
●
Use the CLEAR (
) key to cancel an entry if a mistake is made.
MAKING COPIES
Copying from the document glass
Use the document glass for copying single originals,
bound documents, and other originals that cannot be set
in the optional RADF.
bound documents, and other originals that cannot be set
in the optional RADF.
●
Only 1-sided to 1-sided and 1-sided to 2-sided
copying can be selected when copying from the
document glass.
copying can be selected when copying from the
document glass.
●
Duplex copying will not work when a non-standard
sized paper (or 5-1/2" x 8-1/2"R) paper is used.
sized paper (or 5-1/2" x 8-1/2"R) paper is used.
●
2-sided to 2-sided or 2-sided to 1-sided copying
cannot be selected when copying from the
document glass. These operations can, however,
be performed simply by turning over the original
manually.
cannot be selected when copying from the
document glass. These operations can, however,
be performed simply by turning over the original
manually.
●
Image loss (max. 5 mm (13/64")) can occur along
the leading edge of the copies. Image loss (max. 7
mm (9/32")) can occur along the trailing edge of the
copies. Also image loss (max. 6 mm (1/4") in total)
can occur along the other edges of the copies.
the leading edge of the copies. Image loss (max. 7
mm (9/32")) can occur along the trailing edge of the
copies. Also image loss (max. 6 mm (1/4") in total)
can occur along the other edges of the copies.
Original size detector
Centring scale
READY TO COPY.
DUPLEX
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
A4
A4
A3
B4
B4
AUTO
A4
ORIGINAL
2-4
CHAPTER
2
MAKING COPIES
Copying from the document glass
COPYING FROM THE DOCUMENT GLASS
5
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
●
To perform colour copying, press the COLOUR COPY START
(
(
) key. To perform black/white copying, press the BLACK
COPY START (
) key.
●
The number in the copy quantity display will decrease by 1 each
time a copy is made. To repeat the same copy sequence with a
different original, simply replace the original and press the
START key.
time a copy is made. To repeat the same copy sequence with a
different original, simply replace the original and press the
START key.
●
To cancel a copy run, press the CLEAR ALL (
CA
) key. Copying
will stop and the number in the copy quantity display will be reset
to 0.
to 0.
2-sided copies from 1-sided originals
For an odd number of originals
:
1
Set the last page of the document onto the document
glass, and copy it in the 1-sided to 1-sided mode.
glass, and copy it in the 1-sided to 1-sided mode.
2
Press the 2-SIDED COPY key.
3
Press the
(EVEN NUMBER ORIGINALS) key on the
touch panel and then press the “OK” key.
OUTPUT
2-SIDED
COPY
AUTO
PRE-COUNT
MBER
ALS
OK
PER SELECT
100%
COPY RATIO
AUTO
A4
READY TO COPY.
2-SIDED COPY
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
AUTO
EXPOSURE
PAPER SELE
AUTO 8/ 11
Original size detector
Centring scale
Click on the first or last page to see other AR-C330 (serv.man14) service manuals if exist.