Sharp AR-C330 (serv.man14) User Manual / Operation Manual ▷ View online
2-5
CHAPTER
2
4
Copy the remainder of the originals in reverse order.
●
When making colour copies in the duplex mode onto B4 (8-1/2
"
x 14
")
paper or larger, only one copy per original can be made. Even if a
multiple number of copies is set, the number will be changed to 1 when
the COLOUR COPY START
multiple number of copies is set, the number will be changed to 1 when
the COLOUR COPY START
(
) key is pressed.
For an even number of originals:
1
Press the 2-SIDED COPY key.
2
Press the
(EVEN NUMBER ORIGINALS) key on the
touch panel and then press the “OK” key.
3
Copy the originals in reverse order.
●
When making colour copies in the duplex mode onto B4 (8-1/2
"
x 14
")
paper or larger, only one copy per original can be made. Even if a
multiple number of copies is set, the number will be changed to 1 when
the COLOUR COPY START
multiple number of copies is set, the number will be changed to 1 when
the COLOUR COPY START
(
) key is pressed.
MAKING COPIES
Copying from the document glass
COPYING FROM THE DOCUMENT GLASS
OUTPUT
2-SIDED
COPY
AUTO
PRE-COUNT
MBER
ALS
OK
PER SELECT
100%
COPY RATIO
AUTO
A4
READY TO COPY.
2-SIDED COPY
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
AUTO
EXPOSURE
PAPER SELE
AUTO 8/ 11
2-6
CHAPTER
2
USING THE RADF
●
Duplex copying will not work when a non-standard
sized paper (or 5-1/2" x 8-1/2" paper) is used.
sized paper (or 5-1/2" x 8-1/2" paper) is used.
●
Image loss (max. 5 mm (13/64" )) can occur along the
leading edge of the copies. Image loss (max. 7 mm (9/32"))
can occur along the trailing edge of the copies. Also
image loss (max. 6 mm (1/4") in total) can occur along
the other edges of the copies.
leading edge of the copies. Image loss (max. 7 mm (9/32"))
can occur along the trailing edge of the copies. Also
image loss (max. 6 mm (1/4") in total) can occur along
the other edges of the copies.
●
The RADF can handle a maximum of 50 originals of
A5 to A4 (5-1/2" x 8-1/2" to 8-1/2" x 11") sizes and 30
originals of B4 to A3 (8-1/2" x 14" to 11" x 17") sizes.
A5 to A4 (5-1/2" x 8-1/2" to 8-1/2" x 11") sizes and 30
originals of B4 to A3 (8-1/2" x 14" to 11" x 17") sizes.
●
2-sided to 1-sided copying and 2-sided to 2-sided
copying can be performed.
copying can be performed.
●
The originals must be set face up in the document
feeder tray.
feeder tray.
●
Different size originals with the same width can be
placed in the document feeder tray and automatically
copied onto copy paper of their respective sizes.
The automatic copy ratio selection will not function in
this case.
placed in the document feeder tray and automatically
copied onto copy paper of their respective sizes.
The automatic copy ratio selection will not function in
this case.
This copier can be equipped with an optional reversing
automatic document feeder (RADF).
The RADF will handle multiple originals.
automatic document feeder (RADF).
The RADF will handle multiple originals.
●
Before loading originals into the document feeder
tray, be sure to remove any staples or paper clips
from them.
tray, be sure to remove any staples or paper clips
from them.
●
Damaged or crumpled originals or originals which
have been folded may misfeed in the RADF or cause
incorrect size detection. It is recommended that these
be copied from the document glass and the copies be
used as original documents.
have been folded may misfeed in the RADF or cause
incorrect size detection. It is recommended that these
be copied from the document glass and the copies be
used as original documents.
●
When feeding originals which have closely spaced
binding holes punched along an edge, place the
originals so that the punched edge is positioned to the
right or along the side guides.
binding holes punched along an edge, place the
originals so that the punched edge is positioned to the
right or along the side guides.
●
Special originals such as transparency film and tracing
paper should not be fed from the RADF, but should be
placed on the document glass.
paper should not be fed from the RADF, but should be
placed on the document glass.
Stream feeding mode
If the stream feeding mode has been enabled using a key operator
program, the message “NEWLY PLACED ORIGINALS WILL BE FED
AND COPIED AUTOMATICALLY.
If the stream feeding mode has been enabled using a key operator
program, the message “NEWLY PLACED ORIGINALS WILL BE FED
AND COPIED AUTOMATICALLY.
” will appear and the original feed
indicator will continue to blink for approximately 5 seconds after
feeding of all originals is completed. While this message is displayed,
any new originals placed in the document feeder tray will be fed and
copied automatically.
feeding of all originals is completed. While this message is displayed,
any new originals placed in the document feeder tray will be fed and
copied automatically.
★ KEY OPERATOR
See page 8-15 for information on setting the
stream feeding mode.
MAKING COPIES
Using the RADF
2-7
CHAPTER
2
1-sided copies of 1-sided originals
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
set the originals face up in the document feeder tray.
●
The original size will be indicated on the touch panel, and the
paper tray with the corresponding paper size will be automatically
selected.
paper tray with the corresponding paper size will be automatically
selected.
●
Be sure to remove any original from the document glass before
setting the originals in the document feeder tray. If an original is
left on the document glass, the original reminder indicator will
blink. Remove the original from the document glass in this case.
setting the originals in the document feeder tray. If an original is
left on the document glass, the original reminder indicator will
blink. Remove the original from the document glass in this case.
●
If copy paper of the required size is not installed in any of the
trays, the following message will appear.
trays, the following message will appear.
LOAD
PAPER.
If a tray of the required size is not installed, use the bypass tray
and press the “PAPER SELECT” key on the touch panel to select
the bypass tray.
and press the “PAPER SELECT” key on the touch panel to select
the bypass tray.
●
To copy onto a different size paper, use the “PAPER SELECT”
key to make the selection.
key to make the selection.
2
Ensure that the 1-sided to 1-sided copying mode is
selected on the touch panel.
selected on the touch panel.
●
When no icon is displayed in the area indicated in the illustration
(
(
), the 1-sided to 1-sided copying mode is selected.
●
If the 1-sided to 1-sided mode is not selected, press the
2-SIDED COPY key and then press the 1-sided to 1-sided key
(
2-SIDED COPY key and then press the 1-sided to 1-sided key
(
) on the touch panel. Press the “OK” key to return to the
basic screen.
3
Use the 10-key pad to enter the desired number of
copies.
copies.
●
The number will be shown in the copy quantity display of the
touch panel.
touch panel.
●
Use the CLEAR (
) key to cancel an entry if a mistake has been
made.
4
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
●
To perform colour copying, press the COLOUR COPY START
(
(
) key. To perform black/white copying, press the BLACK
COPY START (
) key.
●
To cancel a copy run, press the CLEAR ALL (
CA
) key. Copying
will stop and the RADF will output any originals which have been
fed. Also, the number in the copy quantity display will be reset to
0.
fed. Also, the number in the copy quantity display will be reset to
0.
MAKING COPIES
Using the RADF
USING THE RADF
READY TO COPY.(DOCUMENT FEEDER MODE)
DUPLEX
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
A4
A4
A3
B4
B4
AUTO
A4
ORIGINAL
Copy
Original
2-8
CHAPTER
2
MAKING COPIES
Using the RADF
USING THE RADF
2-sided copies from 1-sided originals
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
set the originals face up in the document feeder tray.
2
Press the 2-SIDED COPY key.
3
If the number of originals is known, use the
(EVEN
NUMBER ORIGINALS) key or
(ODD NUMBER
ORIGINALS) key on the touch panel, then proceed to
step 4. If the number of originals is not known, select
“PRE-COUNT” for an automatic count by the RADF and
press the COLOUR COPY START (
step 4. If the number of originals is not known, select
“PRE-COUNT” for an automatic count by the RADF and
press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
●
The following message will appear.
PRE-COUNT MODE
NUMBER OF ORIGINALS IS **.
NUMBER OF ORIGINALS IS **.
If the number of originals exceeds the limit, other messages will
appear.
appear.
●
When the count is complete and the number is known, replace
the originals in the document feeder tray and select “EVEN
NUMBER ORIGINALS” or “ODD NUMBER ORIGINALS” as
above.
the originals in the document feeder tray and select “EVEN
NUMBER ORIGINALS” or “ODD NUMBER ORIGINALS” as
above.
4
Press the “OK” key.
5
Enter the desired number of copies.
●
When making colour copies in the duplex mode onto B4 (8-1/2"
x 14") paper or larger, only one copy per original can be made.
Even if a multiple number of copies is set, the number will be
changed to 1 when the COLOUR COPY START (
x 14") paper or larger, only one copy per original can be made.
Even if a multiple number of copies is set, the number will be
changed to 1 when the COLOUR COPY START (
) key is
pressed.
6
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
●
To perform colour copying, press the COLOUR COPY START
(
(
) key. To perform black/white copying, press the BLACK
COPY START (
) key.
●
To cancel a copy run during duplex copying, press the CLEAR
ALL (
ALL (
CA
) key.
Copy (2-sided)
Originals (1-sided)
OUTPUT
2-SIDED
COPY
AUTO
Maximum height
line
line
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO
A4
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO
A4
Click on the first or last page to see other AR-C330 (serv.man14) service manuals if exist.